Cannot INstall NWLink/IPX on customized XP SP2

G

Guest

I´ve created a custom instalation CD with nLite (nliteos.com, a
setupmgr.exe-like) and after all, i can´t install NWlink. When i try to
install a new protocol ONLY appear IPv6. If i try to install Client for
Netware, the client for Netware installs, WITHOUT NWLink.

I already have Novell CLient32 installed, but with TCP/IP support. I need to
installl Client 32 with IPX support (version 4.9, 4.9SP1, 4.9SP2) but the
instalation fails with an error (00000001) (9) Unknow error

Follows, my custom installation files created by nLite. Above, only lines
with the word "IPX" inside the files. There are no NWLink words on the files




---------- DOSNET.INF
d1,ipxmontr.dll
d1,ipxpromn.dll
d1,ipxrtmgr.dll
d1,ipxwan.dll
d1,mipx.mib
d1,nipx.mib
d1,phiipx.ppd
d1,rtipxmib.dll
d1,vwipxspx.dll
d1,vwipxspx.exe
d1,tdipx.sys

---------- DRVINDEX.INF
phiipx.ppd

---------- HIVESFT.INF
HKLM,"SOFTWARE\Microsoft\DirectPlay\Service Providers\IPX Connection For
DirectPlay","dwReserved1",0x00010003,50
HKLM,"SOFTWARE\Microsoft\DirectPlay\Service Providers\IPX Connection For
DirectPlay","dwReserved2",0x00010003,0
HKLM,"SOFTWARE\Microsoft\DirectPlay\Service Providers\IPX Connection For
DirectPlay","Guid",0x00000002,"{685BC400-9D2C-11cf-A9CD-00AA006886E3}"
HKLM,"SOFTWARE\Microsoft\DirectPlay\Service Providers\IPX Connection For
DirectPlay","Path",0x00000002,"dpwsockx.dll"
HKLM,"SOFTWARE\Microsoft\DirectPlay\Service Providers\IPX Connection For
DirectPlay","DescriptionA",0x00000002,"ConexÆo IPX para DirectPlay"
HKLM,"SOFTWARE\Microsoft\DirectPlay\Service Providers\IPX Connection For
DirectPlay","DescriptionW",0x00000002,"ConexÆo IPX para DirectPlay
HKLM,"SOFTWARE\Microsoft\DirectPlay\Services\{5146ab8cb6b1ce11920c00aa006c4972}","Description",0x00000000,"ConexÆo IPX WinSock para DirectPlay"
HKLM,"SOFTWARE\Microsoft\NetSh","5",0x00000002,"ipxmontr.dll"
HKLM,"SOFTWARE\Microsoft\NetSh","6",0x00000002,"ipxpromn.dll"
HKLM,"SOFTWARE\Microsoft\Rpc","DCOM
Protocols",0x00010000,"ncacn_ip_tcp","ncacn_spx","ncacn_nb_nb","ncacn_nb_ipx"

---------- NETRASS.IN_.INF
[Svc-IpxFilter]
DisplayName = %Svc-IpxFilter-DispName%
Description = %Svc-IpxFilter-DispName%
[Svc-IpxForwarder]
DisplayName = %Svc-IpxForwarder-DispName%
Description = %Svc-IpxForwarder-DispName%
HKLM, System\CurrentControlSet\Services\EventLog\System\IPXCP,
EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\mprmsg.dll"
HKLM, System\CurrentControlSet\Services\EventLog\System\IPXCP,
TypesSupported, 0x00010001, 0x00000007
HKLM, System\CurrentControlSet\Services\EventLog\System\IPXRIP,
EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\mprmsg.dll"
HKLM, System\CurrentControlSet\Services\EventLog\System\IPXRIP,
TypesSupported, 0x00010001, 0x00000007
HKLM, System\CurrentControlSet\Services\EventLog\System\IPXRouterManager,
EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\mprmsg.dll"
HKLM, System\CurrentControlSet\Services\EventLog\System\IPXRouterManager,
TypesSupported, 0x00010001, 0x00000007
HKLM, System\CurrentControlSet\Services\EventLog\System\IPXSAP,
EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\mprmsg.dll"
HKLM, System\CurrentControlSet\Services\EventLog\System\IPXSAP,
TypesSupported, 0x00010001, 0x00000007
HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
EnableIn, 0x00010003, 1
HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
AcceptRemoteNodeNumber, 0x00010003, 1
HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
AllowNetworkAccess, 0x00010003, 1
HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
AutoWanNetAllocation, 0x00010003, 1
HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
FirstWanNet, 0x00010003, 0
HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
GlobalWanNet, 0x00010003, 1
HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
LastWanNet, 0x00010003, 0
HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx,
ConfigClsid, 0, "58bdf952-f471-11cf-aa67-00805f0c9232"
HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx,
ConfigDll, 0, "ipxadmin.dll"
HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx,
DllPath, 0x00020000, "%%SystemRoot%%\System32\ipxrtmgr.dll"
HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx,
ProtocolId, 0x00010001, 0x2b
HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx,
Title, 0, %RtrMgr-Ipx-DispName%
HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXRIP,
ConfigDll, 0, "ipxadmin.dll"
HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXRIP,
DllName, 0, "ipxrip.dll"
HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXRIP,
ProtocolId, 0x00010001, 0x20000
HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXRIP,
Title, 0, %RtrMgr-Ipx-Rip-DispName%
HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXSAP,
ConfigDll, 0, "ipxadmin.dll"
HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXSAP,
DllName, 0, "ipxsap.dll"
HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXSAP,
ProtocolId, 0x00010001, 0x20001
HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXSAP,
Title, 0, %RtrMgr-Ipx-Sap-DispName%
HKLM, Software\Microsoft\Router\CurrentVersion\UiConfigDlls,
58bdf952-f471-11cf-aa67-00805f0c9232, 0, "ipxadmin.dll"
Svc-IpxFilter-DispName = "Driver de filtro de tr fego IPX"
Svc-IpxForwarder-DispName = "Driver encaminhador de tr fego IPX"
RtrMgr-Ipx-DispName = "Gerenciador de roteamento IPX"
RtrMgr-Ipx-Rip-DispName = "RIP para IPX"
RtrMgr-Ipx-Sap-DispName = "SAP para IPX"

---------- NTPRINT.INF
"Tektronix Phaser II PX" = PHIIPX.PPD
,TektronixTektronix_P7F79,Tektronix_Phaser_II_PX
[PHIIPX.PPD]
[email protected],PSCRIPT
phiipx.ppd = 1
 
C

Carey Frisch [MVP]

Nlite is not supported by Microsoft and
is not recommended.

--
Carey Frisch
Microsoft MVP
Windows - Shell/User
Microsoft Community Newsgroups
news://msnews.microsoft.com/

-------------------------------------------------------------------------------------------

:

| I´ve created a custom instalation CD with nLite (nliteos.com, a
| setupmgr.exe-like) and after all, i can´t install NWlink. When i try to
| install a new protocol ONLY appear IPv6. If i try to install Client for
| Netware, the client for Netware installs, WITHOUT NWLink.
|
| I already have Novell CLient32 installed, but with TCP/IP support. I need to
| installl Client 32 with IPX support (version 4.9, 4.9SP1, 4.9SP2) but the
| instalation fails with an error (00000001) (9) Unknow error
|
| Follows, my custom installation files created by nLite. Above, only lines
| with the word "IPX" inside the files. There are no NWLink words on the files
|
|
|
|
| ---------- DOSNET.INF
| d1,ipxmontr.dll
| d1,ipxpromn.dll
| d1,ipxrtmgr.dll
| d1,ipxwan.dll
| d1,mipx.mib
| d1,nipx.mib
| d1,phiipx.ppd
| d1,rtipxmib.dll
| d1,vwipxspx.dll
| d1,vwipxspx.exe
| d1,tdipx.sys
|
| ---------- DRVINDEX.INF
| phiipx.ppd
|
| ---------- HIVESFT.INF
| HKLM,"SOFTWARE\Microsoft\DirectPlay\Service Providers\IPX Connection For
| DirectPlay","dwReserved1",0x00010003,50
| HKLM,"SOFTWARE\Microsoft\DirectPlay\Service Providers\IPX Connection For
| DirectPlay","dwReserved2",0x00010003,0
| HKLM,"SOFTWARE\Microsoft\DirectPlay\Service Providers\IPX Connection For
| DirectPlay","Guid",0x00000002,"{685BC400-9D2C-11cf-A9CD-00AA006886E3}"
| HKLM,"SOFTWARE\Microsoft\DirectPlay\Service Providers\IPX Connection For
| DirectPlay","Path",0x00000002,"dpwsockx.dll"
| HKLM,"SOFTWARE\Microsoft\DirectPlay\Service Providers\IPX Connection For
| DirectPlay","DescriptionA",0x00000002,"ConexÆo IPX para DirectPlay"
| HKLM,"SOFTWARE\Microsoft\DirectPlay\Service Providers\IPX Connection For
| DirectPlay","DescriptionW",0x00000002,"ConexÆo IPX para DirectPlay"
| HKLM,"SOFTWARE\Microsoft\DirectPlay\Services\{5146ab8cb6b1ce11920c00aa006c4972}","Description",0x00000000,"ConexÆo IPX WinSock
para DirectPlay"
| HKLM,"SOFTWARE\Microsoft\NetSh","5",0x00000002,"ipxmontr.dll"
| HKLM,"SOFTWARE\Microsoft\NetSh","6",0x00000002,"ipxpromn.dll"
| HKLM,"SOFTWARE\Microsoft\Rpc","DCOM
| Protocols",0x00010000,"ncacn_ip_tcp","ncacn_spx","ncacn_nb_nb","ncacn_nb_ipx"
|
| ---------- NETRASS.IN_.INF
| [Svc-IpxFilter]
| DisplayName = %Svc-IpxFilter-DispName%
| Description = %Svc-IpxFilter-DispName%
| [Svc-IpxForwarder]
| DisplayName = %Svc-IpxForwarder-DispName%
| Description = %Svc-IpxForwarder-DispName%
| HKLM, System\CurrentControlSet\Services\EventLog\System\IPXCP,
| EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\mprmsg.dll"
| HKLM, System\CurrentControlSet\Services\EventLog\System\IPXCP,
| TypesSupported, 0x00010001, 0x00000007
| HKLM, System\CurrentControlSet\Services\EventLog\System\IPXRIP,
| EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\mprmsg.dll"
| HKLM, System\CurrentControlSet\Services\EventLog\System\IPXRIP,
| TypesSupported, 0x00010001, 0x00000007
| HKLM, System\CurrentControlSet\Services\EventLog\System\IPXRouterManager,
| EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\mprmsg.dll"
| HKLM, System\CurrentControlSet\Services\EventLog\System\IPXRouterManager,
| TypesSupported, 0x00010001, 0x00000007
| HKLM, System\CurrentControlSet\Services\EventLog\System\IPXSAP,
| EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\mprmsg.dll"
| HKLM, System\CurrentControlSet\Services\EventLog\System\IPXSAP,
| TypesSupported, 0x00010001, 0x00000007
| HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
| EnableIn, 0x00010003, 1
| HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
| AcceptRemoteNodeNumber, 0x00010003, 1
| HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
| AllowNetworkAccess, 0x00010003, 1
| HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
| AutoWanNetAllocation, 0x00010003, 1
| HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
| FirstWanNet, 0x00010003, 0
| HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
| GlobalWanNet, 0x00010003, 1
| HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
| LastWanNet, 0x00010003, 0
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx,
| ConfigClsid, 0, "58bdf952-f471-11cf-aa67-00805f0c9232"
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx,
| ConfigDll, 0, "ipxadmin.dll"
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx,
| DllPath, 0x00020000, "%%SystemRoot%%\System32\ipxrtmgr.dll"
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx,
| ProtocolId, 0x00010001, 0x2b
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx,
| Title, 0, %RtrMgr-Ipx-DispName%
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXRIP,
| ConfigDll, 0, "ipxadmin.dll"
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXRIP,
| DllName, 0, "ipxrip.dll"
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXRIP,
| ProtocolId, 0x00010001, 0x20000
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXRIP,
| Title, 0, %RtrMgr-Ipx-Rip-DispName%
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXSAP,
| ConfigDll, 0, "ipxadmin.dll"
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXSAP,
| DllName, 0, "ipxsap.dll"
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXSAP,
| ProtocolId, 0x00010001, 0x20001
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXSAP,
| Title, 0, %RtrMgr-Ipx-Sap-DispName%
| HKLM, Software\Microsoft\Router\CurrentVersion\UiConfigDlls,
| 58bdf952-f471-11cf-aa67-00805f0c9232, 0, "ipxadmin.dll"
| Svc-IpxFilter-DispName = "Driver de filtro de tr fego IPX"
| Svc-IpxForwarder-DispName = "Driver encaminhador de tr fego IPX"
| RtrMgr-Ipx-DispName = "Gerenciador de roteamento IPX"
| RtrMgr-Ipx-Rip-DispName = "RIP para IPX"
| RtrMgr-Ipx-Sap-DispName = "SAP para IPX"
|
| ---------- NTPRINT.INF
| "Tektronix Phaser II PX" = PHIIPX.PPD
| ,TektronixTektronix_P7F79,Tektronix_Phaser_II_PX
| [PHIIPX.PPD]
| [email protected],PSCRIPT
| phiipx.ppd = 1
|
|
 
G

Guest

OK, how can i "force" the NWLink/IPX protocol reappear on the list of
protocols to install?
How can i install NWLink/IPX on that machine?

Carey Frisch said:
Nlite is not supported by Microsoft and
is not recommended.

--
Carey Frisch
Microsoft MVP
Windows - Shell/User
Microsoft Community Newsgroups
news://msnews.microsoft.com/

-------------------------------------------------------------------------------------------

:

| I´ve created a custom instalation CD with nLite (nliteos.com, a
| setupmgr.exe-like) and after all, i can´t install NWlink. When i try to
| install a new protocol ONLY appear IPv6. If i try to install Client for
| Netware, the client for Netware installs, WITHOUT NWLink.
|
| I already have Novell CLient32 installed, but with TCP/IP support. I need to
| installl Client 32 with IPX support (version 4.9, 4.9SP1, 4.9SP2) but the
| instalation fails with an error (00000001) (9) Unknow error
|
| Follows, my custom installation files created by nLite. Above, only lines
| with the word "IPX" inside the files. There are no NWLink words on the files
|
|
|
|
| ---------- DOSNET.INF
| d1,ipxmontr.dll
| d1,ipxpromn.dll
| d1,ipxrtmgr.dll
| d1,ipxwan.dll
| d1,mipx.mib
| d1,nipx.mib
| d1,phiipx.ppd
| d1,rtipxmib.dll
| d1,vwipxspx.dll
| d1,vwipxspx.exe
| d1,tdipx.sys
|
| ---------- DRVINDEX.INF
| phiipx.ppd
|
| ---------- HIVESFT.INF
| HKLM,"SOFTWARE\Microsoft\DirectPlay\Service Providers\IPX Connection For
| DirectPlay","dwReserved1",0x00010003,50
| HKLM,"SOFTWARE\Microsoft\DirectPlay\Service Providers\IPX Connection For
| DirectPlay","dwReserved2",0x00010003,0
| HKLM,"SOFTWARE\Microsoft\DirectPlay\Service Providers\IPX Connection For
| DirectPlay","Guid",0x00000002,"{685BC400-9D2C-11cf-A9CD-00AA006886E3}"
| HKLM,"SOFTWARE\Microsoft\DirectPlay\Service Providers\IPX Connection For
| DirectPlay","Path",0x00000002,"dpwsockx.dll"
| HKLM,"SOFTWARE\Microsoft\DirectPlay\Service Providers\IPX Connection For
| DirectPlay","DescriptionA",0x00000002,"ConexÆo IPX para DirectPlay"
| HKLM,"SOFTWARE\Microsoft\DirectPlay\Service Providers\IPX Connection For
| DirectPlay","DescriptionW",0x00000002,"ConexÆo IPX para DirectPlay"
| HKLM,"SOFTWARE\Microsoft\DirectPlay\Services\{5146ab8cb6b1ce11920c00aa006c4972}","Description",0x00000000,"ConexÆo IPX WinSock
para DirectPlay"
| HKLM,"SOFTWARE\Microsoft\NetSh","5",0x00000002,"ipxmontr.dll"
| HKLM,"SOFTWARE\Microsoft\NetSh","6",0x00000002,"ipxpromn.dll"
| HKLM,"SOFTWARE\Microsoft\Rpc","DCOM
| Protocols",0x00010000,"ncacn_ip_tcp","ncacn_spx","ncacn_nb_nb","ncacn_nb_ipx"
|
| ---------- NETRASS.IN_.INF
| [Svc-IpxFilter]
| DisplayName = %Svc-IpxFilter-DispName%
| Description = %Svc-IpxFilter-DispName%
| [Svc-IpxForwarder]
| DisplayName = %Svc-IpxForwarder-DispName%
| Description = %Svc-IpxForwarder-DispName%
| HKLM, System\CurrentControlSet\Services\EventLog\System\IPXCP,
| EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\mprmsg.dll"
| HKLM, System\CurrentControlSet\Services\EventLog\System\IPXCP,
| TypesSupported, 0x00010001, 0x00000007
| HKLM, System\CurrentControlSet\Services\EventLog\System\IPXRIP,
| EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\mprmsg.dll"
| HKLM, System\CurrentControlSet\Services\EventLog\System\IPXRIP,
| TypesSupported, 0x00010001, 0x00000007
| HKLM, System\CurrentControlSet\Services\EventLog\System\IPXRouterManager,
| EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\mprmsg.dll"
| HKLM, System\CurrentControlSet\Services\EventLog\System\IPXRouterManager,
| TypesSupported, 0x00010001, 0x00000007
| HKLM, System\CurrentControlSet\Services\EventLog\System\IPXSAP,
| EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\mprmsg.dll"
| HKLM, System\CurrentControlSet\Services\EventLog\System\IPXSAP,
| TypesSupported, 0x00010001, 0x00000007
| HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
| EnableIn, 0x00010003, 1
| HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
| AcceptRemoteNodeNumber, 0x00010003, 1
| HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
| AllowNetworkAccess, 0x00010003, 1
| HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
| AutoWanNetAllocation, 0x00010003, 1
| HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
| FirstWanNet, 0x00010003, 0
| HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
| GlobalWanNet, 0x00010003, 1
| HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
| LastWanNet, 0x00010003, 0
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx,
| ConfigClsid, 0, "58bdf952-f471-11cf-aa67-00805f0c9232"
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx,
| ConfigDll, 0, "ipxadmin.dll"
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx,
| DllPath, 0x00020000, "%%SystemRoot%%\System32\ipxrtmgr.dll"
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx,
| ProtocolId, 0x00010001, 0x2b
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx,
| Title, 0, %RtrMgr-Ipx-DispName%
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXRIP,
| ConfigDll, 0, "ipxadmin.dll"
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXRIP,
| DllName, 0, "ipxrip.dll"
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXRIP,
| ProtocolId, 0x00010001, 0x20000
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXRIP,
| Title, 0, %RtrMgr-Ipx-Rip-DispName%
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXSAP,
| ConfigDll, 0, "ipxadmin.dll"
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXSAP,
| DllName, 0, "ipxsap.dll"
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXSAP,
| ProtocolId, 0x00010001, 0x20001
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXSAP,
| Title, 0, %RtrMgr-Ipx-Sap-DispName%
| HKLM, Software\Microsoft\Router\CurrentVersion\UiConfigDlls,
| 58bdf952-f471-11cf-aa67-00805f0c9232, 0, "ipxadmin.dll"
| Svc-IpxFilter-DispName = "Driver de filtro de tr fego IPX"
| Svc-IpxForwarder-DispName = "Driver encaminhador de tr fego IPX"
| RtrMgr-Ipx-DispName = "Gerenciador de roteamento IPX"
| RtrMgr-Ipx-Rip-DispName = "RIP para IPX"
| RtrMgr-Ipx-Sap-DispName = "SAP para IPX"
|
| ---------- NTPRINT.INF
| "Tektronix Phaser II PX" = PHIIPX.PPD
| ,TektronixTektronix_P7F79,Tektronix_Phaser_II_PX
| [PHIIPX.PPD]
| [email protected],PSCRIPT
| phiipx.ppd = 1
|
|
Click to expand...
 
G

Guest

I´m tryingo to solve the problem:

1) I´ve copied expanded netnwlnk.inf, nwlnkipx.sys and wshisn.dll to \system32
2) Installed IPX via "have disk"

But Netwares shares and Rconsole are not avalilable after this.

I think that the NWLink instaltion is incomplete

How can io know wich files is necessary fo NWLink/IPX support?



Carey Frisch said:
Nlite is not supported by Microsoft and
is not recommended.

--
Carey Frisch
Microsoft MVP
Windows - Shell/User
Microsoft Community Newsgroups
news://msnews.microsoft.com/

-------------------------------------------------------------------------------------------

:

| I´ve created a custom instalation CD with nLite (nliteos.com, a
| setupmgr.exe-like) and after all, i can´t install NWlink. When i try to
| install a new protocol ONLY appear IPv6. If i try to install Client for
| Netware, the client for Netware installs, WITHOUT NWLink.
|
| I already have Novell CLient32 installed, but with TCP/IP support. I need to
| installl Client 32 with IPX support (version 4.9, 4.9SP1, 4.9SP2) but the
| instalation fails with an error (00000001) (9) Unknow error
|
| Follows, my custom installation files created by nLite. Above, only lines
| with the word "IPX" inside the files. There are no NWLink words on the files
|
|
|
|
| ---------- DOSNET.INF
| d1,ipxmontr.dll
| d1,ipxpromn.dll
| d1,ipxrtmgr.dll
| d1,ipxwan.dll
| d1,mipx.mib
| d1,nipx.mib
| d1,phiipx.ppd
| d1,rtipxmib.dll
| d1,vwipxspx.dll
| d1,vwipxspx.exe
| d1,tdipx.sys
|
| ---------- DRVINDEX.INF
| phiipx.ppd
|
| ---------- HIVESFT.INF
| HKLM,"SOFTWARE\Microsoft\DirectPlay\Service Providers\IPX Connection For
| DirectPlay","dwReserved1",0x00010003,50
| HKLM,"SOFTWARE\Microsoft\DirectPlay\Service Providers\IPX Connection For
| DirectPlay","dwReserved2",0x00010003,0
| HKLM,"SOFTWARE\Microsoft\DirectPlay\Service Providers\IPX Connection For
| DirectPlay","Guid",0x00000002,"{685BC400-9D2C-11cf-A9CD-00AA006886E3}"
| HKLM,"SOFTWARE\Microsoft\DirectPlay\Service Providers\IPX Connection For
| DirectPlay","Path",0x00000002,"dpwsockx.dll"
| HKLM,"SOFTWARE\Microsoft\DirectPlay\Service Providers\IPX Connection For
| DirectPlay","DescriptionA",0x00000002,"ConexÆo IPX para DirectPlay"
| HKLM,"SOFTWARE\Microsoft\DirectPlay\Service Providers\IPX Connection For
| DirectPlay","DescriptionW",0x00000002,"ConexÆo IPX para DirectPlay"
| HKLM,"SOFTWARE\Microsoft\DirectPlay\Services\{5146ab8cb6b1ce11920c00aa006c4972}","Description",0x00000000,"ConexÆo IPX WinSock
para DirectPlay"
| HKLM,"SOFTWARE\Microsoft\NetSh","5",0x00000002,"ipxmontr.dll"
| HKLM,"SOFTWARE\Microsoft\NetSh","6",0x00000002,"ipxpromn.dll"
| HKLM,"SOFTWARE\Microsoft\Rpc","DCOM
| Protocols",0x00010000,"ncacn_ip_tcp","ncacn_spx","ncacn_nb_nb","ncacn_nb_ipx"
|
| ---------- NETRASS.IN_.INF
| [Svc-IpxFilter]
| DisplayName = %Svc-IpxFilter-DispName%
| Description = %Svc-IpxFilter-DispName%
| [Svc-IpxForwarder]
| DisplayName = %Svc-IpxForwarder-DispName%
| Description = %Svc-IpxForwarder-DispName%
| HKLM, System\CurrentControlSet\Services\EventLog\System\IPXCP,
| EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\mprmsg.dll"
| HKLM, System\CurrentControlSet\Services\EventLog\System\IPXCP,
| TypesSupported, 0x00010001, 0x00000007
| HKLM, System\CurrentControlSet\Services\EventLog\System\IPXRIP,
| EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\mprmsg.dll"
| HKLM, System\CurrentControlSet\Services\EventLog\System\IPXRIP,
| TypesSupported, 0x00010001, 0x00000007
| HKLM, System\CurrentControlSet\Services\EventLog\System\IPXRouterManager,
| EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\mprmsg.dll"
| HKLM, System\CurrentControlSet\Services\EventLog\System\IPXRouterManager,
| TypesSupported, 0x00010001, 0x00000007
| HKLM, System\CurrentControlSet\Services\EventLog\System\IPXSAP,
| EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\mprmsg.dll"
| HKLM, System\CurrentControlSet\Services\EventLog\System\IPXSAP,
| TypesSupported, 0x00010001, 0x00000007
| HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
| EnableIn, 0x00010003, 1
| HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
| AcceptRemoteNodeNumber, 0x00010003, 1
| HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
| AllowNetworkAccess, 0x00010003, 1
| HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
| AutoWanNetAllocation, 0x00010003, 1
| HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
| FirstWanNet, 0x00010003, 0
| HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
| GlobalWanNet, 0x00010003, 1
| HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
| LastWanNet, 0x00010003, 0
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx,
| ConfigClsid, 0, "58bdf952-f471-11cf-aa67-00805f0c9232"
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx,
| ConfigDll, 0, "ipxadmin.dll"
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx,
| DllPath, 0x00020000, "%%SystemRoot%%\System32\ipxrtmgr.dll"
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx,
| ProtocolId, 0x00010001, 0x2b
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx,
| Title, 0, %RtrMgr-Ipx-DispName%
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXRIP,
| ConfigDll, 0, "ipxadmin.dll"
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXRIP,
| DllName, 0, "ipxrip.dll"
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXRIP,
| ProtocolId, 0x00010001, 0x20000
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXRIP,
| Title, 0, %RtrMgr-Ipx-Rip-DispName%
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXSAP,
| ConfigDll, 0, "ipxadmin.dll"
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXSAP,
| DllName, 0, "ipxsap.dll"
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXSAP,
| ProtocolId, 0x00010001, 0x20001
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXSAP,
| Title, 0, %RtrMgr-Ipx-Sap-DispName%
| HKLM, Software\Microsoft\Router\CurrentVersion\UiConfigDlls,
| 58bdf952-f471-11cf-aa67-00805f0c9232, 0, "ipxadmin.dll"
| Svc-IpxFilter-DispName = "Driver de filtro de tr fego IPX"
| Svc-IpxForwarder-DispName = "Driver encaminhador de tr fego IPX"
| RtrMgr-Ipx-DispName = "Gerenciador de roteamento IPX"
| RtrMgr-Ipx-Rip-DispName = "RIP para IPX"
| RtrMgr-Ipx-Sap-DispName = "SAP para IPX"
|
| ---------- NTPRINT.INF
| "Tektronix Phaser II PX" = PHIIPX.PPD
| ,TektronixTektronix_P7F79,Tektronix_Phaser_II_PX
| [PHIIPX.PPD]
| [email protected],PSCRIPT
| phiipx.ppd = 1
|
|
Click to expand...
 
G

Guest

A flaw in the described procedure, the NWLink NETBIOS was not installed!
I´ve copied the nwlnkspx.sys, nwlnkipx.sys and nwlnknb.sys to the \system32
but the intalation does not succeed.

The INF file shows sometimes a %12%\FILE.SYS
Wher is the %12% folder?

Example:
NETNWLNK.INF
ServiceBinary=%12%\nwlnknb.sys --> Problem here?
ServiceBinary=%12%\nwlnkipx.sys
ServiceBinary=%12%\nwlnkspx.sys

Now, i vahe IPX/SPS installed on NetCard propeties, but not the NWLink
NetBIOS iten






FB said:
I´m tryingo to solve the problem:

1) I´ve copied expanded netnwlnk.inf, nwlnkipx.sys and wshisn.dll to \system32
2) Installed IPX via "have disk"

But Netwares shares and Rconsole are not avalilable after this.

I think that the NWLink instaltion is incomplete

How can io know wich files is necessary fo NWLink/IPX support?



Carey Frisch said:
Nlite is not supported by Microsoft and
is not recommended.

--
Carey Frisch
Microsoft MVP
Windows - Shell/User
Microsoft Community Newsgroups
news://msnews.microsoft.com/

-------------------------------------------------------------------------------------------

:

| I´ve created a custom instalation CD with nLite (nliteos.com, a
| setupmgr.exe-like) and after all, i can´t install NWlink. When i try to
| install a new protocol ONLY appear IPv6. If i try to install Client for
| Netware, the client for Netware installs, WITHOUT NWLink.
|
| I already have Novell CLient32 installed, but with TCP/IP support. I need to
| installl Client 32 with IPX support (version 4.9, 4.9SP1, 4.9SP2) but the
| instalation fails with an error (00000001) (9) Unknow error
|
| Follows, my custom installation files created by nLite. Above, only lines
| with the word "IPX" inside the files. There are no NWLink words on the files
|
|
|
|
| ---------- DOSNET.INF
| d1,ipxmontr.dll
| d1,ipxpromn.dll
| d1,ipxrtmgr.dll
| d1,ipxwan.dll
| d1,mipx.mib
| d1,nipx.mib
| d1,phiipx.ppd
| d1,rtipxmib.dll
| d1,vwipxspx.dll
| d1,vwipxspx.exe
| d1,tdipx.sys
|
| ---------- DRVINDEX.INF
| phiipx.ppd
|
| ---------- HIVESFT.INF
| HKLM,"SOFTWARE\Microsoft\DirectPlay\Service Providers\IPX Connection For
| DirectPlay","dwReserved1",0x00010003,50
| HKLM,"SOFTWARE\Microsoft\DirectPlay\Service Providers\IPX Connection For
| DirectPlay","dwReserved2",0x00010003,0
| HKLM,"SOFTWARE\Microsoft\DirectPlay\Service Providers\IPX Connection For
| DirectPlay","Guid",0x00000002,"{685BC400-9D2C-11cf-A9CD-00AA006886E3}"
| HKLM,"SOFTWARE\Microsoft\DirectPlay\Service Providers\IPX Connection For
| DirectPlay","Path",0x00000002,"dpwsockx.dll"
| HKLM,"SOFTWARE\Microsoft\DirectPlay\Service Providers\IPX Connection For
| DirectPlay","DescriptionA",0x00000002,"ConexÆo IPX para DirectPlay"
| HKLM,"SOFTWARE\Microsoft\DirectPlay\Service Providers\IPX Connection For
| DirectPlay","DescriptionW",0x00000002,"ConexÆo IPX para DirectPlay"
| HKLM,"SOFTWARE\Microsoft\DirectPlay\Services\{5146ab8cb6b1ce11920c00aa006c4972}","Description",0x00000000,"ConexÆo IPX WinSock
para DirectPlay"
| HKLM,"SOFTWARE\Microsoft\NetSh","5",0x00000002,"ipxmontr.dll"
| HKLM,"SOFTWARE\Microsoft\NetSh","6",0x00000002,"ipxpromn.dll"
| HKLM,"SOFTWARE\Microsoft\Rpc","DCOM
| Protocols",0x00010000,"ncacn_ip_tcp","ncacn_spx","ncacn_nb_nb","ncacn_nb_ipx"
|
| ---------- NETRASS.IN_.INF
| [Svc-IpxFilter]
| DisplayName = %Svc-IpxFilter-DispName%
| Description = %Svc-IpxFilter-DispName%
| [Svc-IpxForwarder]
| DisplayName = %Svc-IpxForwarder-DispName%
| Description = %Svc-IpxForwarder-DispName%
| HKLM, System\CurrentControlSet\Services\EventLog\System\IPXCP,
| EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\mprmsg.dll"
| HKLM, System\CurrentControlSet\Services\EventLog\System\IPXCP,
| TypesSupported, 0x00010001, 0x00000007
| HKLM, System\CurrentControlSet\Services\EventLog\System\IPXRIP,
| EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\mprmsg.dll"
| HKLM, System\CurrentControlSet\Services\EventLog\System\IPXRIP,
| TypesSupported, 0x00010001, 0x00000007
| HKLM, System\CurrentControlSet\Services\EventLog\System\IPXRouterManager,
| EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\mprmsg.dll"
| HKLM, System\CurrentControlSet\Services\EventLog\System\IPXRouterManager,
| TypesSupported, 0x00010001, 0x00000007
| HKLM, System\CurrentControlSet\Services\EventLog\System\IPXSAP,
| EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\mprmsg.dll"
| HKLM, System\CurrentControlSet\Services\EventLog\System\IPXSAP,
| TypesSupported, 0x00010001, 0x00000007
| HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
| EnableIn, 0x00010003, 1
| HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
| AcceptRemoteNodeNumber, 0x00010003, 1
| HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
| AllowNetworkAccess, 0x00010003, 1
| HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
| AutoWanNetAllocation, 0x00010003, 1
| HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
| FirstWanNet, 0x00010003, 0
| HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
| GlobalWanNet, 0x00010003, 1
| HKLM, System\CurrentControlSet\Services\RemoteAccess\Parameters\Ipx,
| LastWanNet, 0x00010003, 0
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx,
| ConfigClsid, 0, "58bdf952-f471-11cf-aa67-00805f0c9232"
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx,
| ConfigDll, 0, "ipxadmin.dll"
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx,
| DllPath, 0x00020000, "%%SystemRoot%%\System32\ipxrtmgr.dll"
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx,
| ProtocolId, 0x00010001, 0x2b
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx,
| Title, 0, %RtrMgr-Ipx-DispName%
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXRIP,
| ConfigDll, 0, "ipxadmin.dll"
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXRIP,
| DllName, 0, "ipxrip.dll"
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXRIP,
| ProtocolId, 0x00010001, 0x20000
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXRIP,
| Title, 0, %RtrMgr-Ipx-Rip-DispName%
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXSAP,
| ConfigDll, 0, "ipxadmin.dll"
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXSAP,
| DllName, 0, "ipxsap.dll"
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXSAP,
| ProtocolId, 0x00010001, 0x20001
| HKLM, Software\Microsoft\Router\CurrentVersion\RouterManagers\Ipx\IPXSAP,
| Title, 0, %RtrMgr-Ipx-Sap-DispName%
| HKLM, Software\Microsoft\Router\CurrentVersion\UiConfigDlls,
| 58bdf952-f471-11cf-aa67-00805f0c9232, 0, "ipxadmin.dll"
| Svc-IpxFilter-DispName = "Driver de filtro de tr fego IPX"
| Svc-IpxForwarder-DispName = "Driver encaminhador de tr fego IPX"
| RtrMgr-Ipx-DispName = "Gerenciador de roteamento IPX"
| RtrMgr-Ipx-Rip-DispName = "RIP para IPX"
| RtrMgr-Ipx-Sap-DispName = "SAP para IPX"
|
| ---------- NTPRINT.INF
| "Tektronix Phaser II PX" = PHIIPX.PPD
| ,TektronixTektronix_P7F79,Tektronix_Phaser_II_PX
| [PHIIPX.PPD]
| [email protected],PSCRIPT
| phiipx.ppd = 1
|
|
Click to expand...
Click to expand...
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Radeon 9200 SE: device cannot start 1
Can't Ping My Own IP Address - Part 2 3
XP Pro SP1 cannot map a network share on another XP Pro SP1 4
Offer Remote Assistance - "Permission denied" - Windows XP SP2 2
Help! Explorer.exe crashing due to fault in shell32.dll. 9
HELP! Explorer.exe crashing because of shell32.dll! 16
WTD: Nvidia Videocard for 4x AGP Slot 0

Top