Cannot activate a chart on a sheet

[Guest]

I have a embedded chart (there is only one chart) on a sheet. I tried naming
it with

ActivesSheet.ChartObjects(1).Name = "chart 1"

Question 1: did the above statement name the chart object or the chart
contained within the chart object?

Using a macro I tried to activate the chart with the command

Worksheets(2).ChartObjects(1).Activate

this however did not activate the chart.

If however I change the command to

Worksheets(2).ChartObjects("Chart 75").Activate

the chart is activated ("Chart 75" is the name of the chart as it appears on
the top of the widow that pops up if you right click on the chart and select
Chart Window). This name (on the Chart Window) changes everytime the chart is
redrawn.

Question 2: How can I select the chart on the desired sheet?
Question 3: Can I somehow extract the name as it appears on the Chart Window?

I do not know if it has anything to do with it, but the chart on sheet 2 was
placed as a result of a comboBox_Change code. ComboBox is on sheet 1.

Thanks for your help.

 

[Peter T]

Comments in line -

I have a embedded chart (there is only one chart) on a sheet. I tried naming
it with

ActivesSheet.ChartObjects(1).Name = "chart 1"

Question 1: did the above statement name the chart object or the chart
contained within the chart object?

It should do if you amend the typo ActivesSheet to ActiveSheet and no other
chart on the sheet with that name (subject protection).

Using a macro I tried to activate the chart with the command

Worksheets(2).ChartObjects(1).Activate

this however did not activate the chart.

If however I change the command to

Worksheets(2).ChartObjects("Chart 75").Activate

the chart is activated ("Chart 75" is the name of the chart as it appears on
the top of the widow that pops up if you right click on the chart and select
Chart Window).

Not sure why ChartObjects(1) fails but ChartObjects("Chart 75") works,
there's obviously at least one chartobject on the sheet.

This name (on the Chart Window) changes everytime the chart is
redrawn.

You mean each time you deleate & recreate a chart. The number will increment
to the total number of objects that have 'ever' been added to the sheet. The
counter is only reset if the wb & sheet is saved with no objects.

Question 2: How can I select the chart on the desired sheet?

Need to activate the sheet first.

Question 3: Can I somehow extract the name as it appears on the Chart

Window?

Activesheet.Chartobjects.Chart.Name returns 'sheetname chartname' which will
be prefixed with the sheetname (the chartwindow also includes [wb-name]).
It's actual name though for referencing purposes is -
Activesheet.Chartobjects(1).Name or ActiveChart.Parent.Name

I do not know if it has anything to do with it, but the chart on sheet 2 was
placed as a result of a comboBox_Change code. ComboBox is on sheet 1.

Not directly related

Regards,
Peter T

 

[Guest]

Thanks Peter for the detailed reply. There is no typo with the command
ActiveSheet.ChartObjects(1).Name = "chart 1" within my code.

At any given time there is only one chart on the sheet so it really beats me
why the command Worksheets(2).ChartObjects(1).Activate would not activate
the chart (the sheet is already activated).

Although I am still struggling with it but thank you for your reply. I will
try using the chart name as suggested by you
(Activesheet.Chartobjects(1).Name or ActiveChart.Parent.Name) and see if I
can get the chart activated.

Regards
Farooq

Comments in line -

I have a embedded chart (there is only one chart) on a sheet. I tried naming
it with

ActivesSheet.ChartObjects(1).Name = "chart 1"

Question 1: did the above statement name the chart object or the chart
contained within the chart object?

It should do if you amend the typo ActivesSheet to ActiveSheet and no other
chart on the sheet with that name (subject protection).

Using a macro I tried to activate the chart with the command

Worksheets(2).ChartObjects(1).Activate

this however did not activate the chart.

If however I change the command to

Worksheets(2).ChartObjects("Chart 75").Activate

the chart is activated ("Chart 75" is the name of the chart as it appears on
the top of the widow that pops up if you right click on the chart and select
Chart Window).

Not sure why ChartObjects(1) fails but ChartObjects("Chart 75") works,
there's obviously at least one chartobject on the sheet.

This name (on the Chart Window) changes everytime the chart is
redrawn.

You mean each time you deleate & recreate a chart. The number will increment
to the total number of objects that have 'ever' been added to the sheet. The
counter is only reset if the wb & sheet is saved with no objects.

Question 2: How can I select the chart on the desired sheet?

Need to activate the sheet first.

Question 3: Can I somehow extract the name as it appears on the Chart

Window?

Activesheet.Chartobjects.Chart.Name returns 'sheetname chartname' which will
be prefixed with the sheetname (the chartwindow also includes [wb-name]).
It's actual name though for referencing purposes is -
Activesheet.Chartobjects(1).Name or ActiveChart.Parent.Name

I do not know if it has anything to do with it, but the chart on sheet 2 was
placed as a result of a comboBox_Change code. ComboBox is on sheet 1.

Not directly related

Regards,
Peter T

 

[Peter T]

Sometimes it's necessary to deselect some other chart first, particularly if
it's in a window. Also sometimes necessary to select the .Chart if it was
selected as a chartobject. But if the current selection is say a cell I have
no idea why referring to it by it's index number fails but works with it's
name.

Are you absolutely sure there's only one chartobject, eg you didn't once
assume deleting all the rows it's in would delete it.
In the immediate window (ctrl-g) type
?activesheet.chartobjects.count
and press enter

Regards,
Peter T

Thanks Peter for the detailed reply. There is no typo with the command
ActiveSheet.ChartObjects(1).Name = "chart 1" within my code.

At any given time there is only one chart on the sheet so it really beats me
why the command Worksheets(2).ChartObjects(1).Activate would not activate
the chart (the sheet is already activated).

Although I am still struggling with it but thank you for your reply. I will
try using the chart name as suggested by you
(Activesheet.Chartobjects(1).Name or ActiveChart.Parent.Name) and see if I
can get the chart activated.

Regards
Farooq

Comments in line -

I have a embedded chart (there is only one chart) on a sheet. I tried naming
it with

ActivesSheet.ChartObjects(1).Name = "chart 1"

Question 1: did the above statement name the chart object or the chart
contained within the chart object?

It should do if you amend the typo ActivesSheet to ActiveSheet and no other
chart on the sheet with that name (subject protection).

Using a macro I tried to activate the chart with the command

Worksheets(2).ChartObjects(1).Activate

this however did not activate the chart.

If however I change the command to

Worksheets(2).ChartObjects("Chart 75").Activate

the chart is activated ("Chart 75" is the name of the chart as it

appears
on

the top of the widow that pops up if you right click on the chart and select
Chart Window).

Not sure why ChartObjects(1) fails but ChartObjects("Chart 75") works,
there's obviously at least one chartobject on the sheet.

This name (on the Chart Window) changes everytime the chart is
redrawn.

You mean each time you deleate & recreate a chart. The number will increment
to the total number of objects that have 'ever' been added to the sheet. The
counter is only reset if the wb & sheet is saved with no objects.

Question 2: How can I select the chart on the desired sheet?

Need to activate the sheet first.

Question 3: Can I somehow extract the name as it appears on the Chart

Window?

Activesheet.Chartobjects.Chart.Name returns 'sheetname chartname' which will
be prefixed with the sheetname (the chartwindow also includes [wb-name]).
It's actual name though for referencing purposes is -
Activesheet.Chartobjects(1).Name or ActiveChart.Parent.Name

I do not know if it has anything to do with it, but the chart on sheet

2
was

placed as a result of a comboBox_Change code. ComboBox is on sheet 1.

Not directly related

Regards,
Peter T

 

[Guest]

Thanks Peter. I used the name as obtained from ActiveChart.Parent.Name to get
the desired results.

Thanks a lot.

Farooq Sheri

Sometimes it's necessary to deselect some other chart first, particularly if
it's in a window. Also sometimes necessary to select the .Chart if it was
selected as a chartobject. But if the current selection is say a cell I have
no idea why referring to it by it's index number fails but works with it's
name.

Are you absolutely sure there's only one chartobject, eg you didn't once
assume deleting all the rows it's in would delete it.
In the immediate window (ctrl-g) type
?activesheet.chartobjects.count
and press enter

Regards,
Peter T

Thanks Peter for the detailed reply. There is no typo with the command
ActiveSheet.ChartObjects(1).Name = "chart 1" within my code.

At any given time there is only one chart on the sheet so it really beats me
why the command Worksheets(2).ChartObjects(1).Activate would not activate
the chart (the sheet is already activated).

Although I am still struggling with it but thank you for your reply. I will
try using the chart name as suggested by you
(Activesheet.Chartobjects(1).Name or ActiveChart.Parent.Name) and see if I
can get the chart activated.

Regards
Farooq

Comments in line -

I have a embedded chart (there is only one chart) on a sheet. I tried
naming
it with

ActivesSheet.ChartObjects(1).Name = "chart 1"

Question 1: did the above statement name the chart object or the chart
contained within the chart object?

It should do if you amend the typo ActivesSheet to ActiveSheet and no other
chart on the sheet with that name (subject protection).

Using a macro I tried to activate the chart with the command

Worksheets(2).ChartObjects(1).Activate

this however did not activate the chart.

If however I change the command to

Worksheets(2).ChartObjects("Chart 75").Activate

the chart is activated ("Chart 75" is the name of the chart as it appears
on
the top of the widow that pops up if you right click on the chart and
select
Chart Window).

Not sure why ChartObjects(1) fails but ChartObjects("Chart 75") works,
there's obviously at least one chartobject on the sheet.

This name (on the Chart Window) changes everytime the chart is
redrawn.

You mean each time you deleate & recreate a chart. The number will increment
to the total number of objects that have 'ever' been added to the sheet. The
counter is only reset if the wb & sheet is saved with no objects.

Question 2: How can I select the chart on the desired sheet?

Need to activate the sheet first.

Question 3: Can I somehow extract the name as it appears on the Chart
Window?

Activesheet.Chartobjects.Chart.Name returns 'sheetname chartname' which will
be prefixed with the sheetname (the chartwindow also includes [wb-name]).
It's actual name though for referencing purposes is -
Activesheet.Chartobjects(1).Name or ActiveChart.Parent.Name

I do not know if it has anything to do with it, but the chart on sheet 2
was
placed as a result of a comboBox_Change code. ComboBox is on sheet 1.

Not directly related

Regards,
Peter T

 

[Peter T]

Did you programmatically check how many chartobjects exit on the sheet.

Regards,
Peter T

Thanks Peter. I used the name as obtained from ActiveChart.Parent.Name to get
the desired results.

Thanks a lot.

Farooq Sheri

Sometimes it's necessary to deselect some other chart first, particularly if
it's in a window. Also sometimes necessary to select the .Chart if it was
selected as a chartobject. But if the current selection is say a cell I have
no idea why referring to it by it's index number fails but works with it's
name.

Are you absolutely sure there's only one chartobject, eg you didn't once
assume deleting all the rows it's in would delete it.
In the immediate window (ctrl-g) type
?activesheet.chartobjects.count
and press enter

Regards,
Peter T

Thanks Peter for the detailed reply. There is no typo with the command
ActiveSheet.ChartObjects(1).Name = "chart 1" within my code.

At any given time there is only one chart on the sheet so it really

beats
me

why the command Worksheets(2).ChartObjects(1).Activate would not activate
the chart (the sheet is already activated).

Although I am still struggling with it but thank you for your reply. I will
try using the chart name as suggested by you
(Activesheet.Chartobjects(1).Name or ActiveChart.Parent.Name) and see if I
can get the chart activated.

Regards
Farooq

:

Comments in line -

I have a embedded chart (there is only one chart) on a sheet. I tried
naming
it with

ActivesSheet.ChartObjects(1).Name = "chart 1"

Question 1: did the above statement name the chart object or the chart
contained within the chart object?

It should do if you amend the typo ActivesSheet to ActiveSheet and

no
other

chart on the sheet with that name (subject protection).

Using a macro I tried to activate the chart with the command

Worksheets(2).ChartObjects(1).Activate

this however did not activate the chart.

If however I change the command to

Worksheets(2).ChartObjects("Chart 75").Activate

the chart is activated ("Chart 75" is the name of the chart as it appears
on
the top of the widow that pops up if you right click on the chart and
select
Chart Window).

Not sure why ChartObjects(1) fails but ChartObjects("Chart 75") works,
there's obviously at least one chartobject on the sheet.

This name (on the Chart Window) changes everytime the chart is
redrawn.

You mean each time you deleate & recreate a chart. The number will increment
to the total number of objects that have 'ever' been added to the

sheet.
The

counter is only reset if the wb & sheet is saved with no objects.

Question 2: How can I select the chart on the desired sheet?

Need to activate the sheet first.

Question 3: Can I somehow extract the name as it appears on the Chart
Window?

Activesheet.Chartobjects.Chart.Name returns 'sheetname chartname'

which
will

be prefixed with the sheetname (the chartwindow also includes [wb-name]).
It's actual name though for referencing purposes is -
Activesheet.Chartobjects(1).Name or ActiveChart.Parent.Name

I do not know if it has anything to do with it, but the chart on

sheet
2

was
placed as a result of a comboBox_Change code. ComboBox is on sheet 1.

Not directly related

Regards,
Peter T

 

[Guest]

I am quite sure because each time before any data / chart was put on the
sheet cells.delete was used to delete the sheet of any previous data / chart.
I have used the command activesheet.chartobjects(1).activate previously and
it works but for some strange reasons it is not working here. This case is a
good one for head scratching. In fact just to test I copied the data from
this sheet onto another sheet and made a chart and the above command
activated the chart.

Thanks and regards.
Farooq

Did you programmatically check how many chartobjects exit on the sheet.

Regards,
Peter T

Thanks Peter. I used the name as obtained from ActiveChart.Parent.Name to get
the desired results.

Thanks a lot.

Farooq Sheri

Sometimes it's necessary to deselect some other chart first, particularly if
it's in a window. Also sometimes necessary to select the .Chart if it was
selected as a chartobject. But if the current selection is say a cell I have
no idea why referring to it by it's index number fails but works with it's
name.

Are you absolutely sure there's only one chartobject, eg you didn't once
assume deleting all the rows it's in would delete it.
In the immediate window (ctrl-g) type
?activesheet.chartobjects.count
and press enter

Regards,
Peter T

Thanks Peter for the detailed reply. There is no typo with the command
ActiveSheet.ChartObjects(1).Name = "chart 1" within my code.

At any given time there is only one chart on the sheet so it really beats
me
why the command Worksheets(2).ChartObjects(1).Activate would not activate
the chart (the sheet is already activated).

Although I am still struggling with it but thank you for your reply. I
will
try using the chart name as suggested by you
(Activesheet.Chartobjects(1).Name or ActiveChart.Parent.Name) and see if I
can get the chart activated.

Regards
Farooq

:

Comments in line -

I have a embedded chart (there is only one chart) on a sheet. I tried
naming
it with

ActivesSheet.ChartObjects(1).Name = "chart 1"

Question 1: did the above statement name the chart object or the chart
contained within the chart object?

It should do if you amend the typo ActivesSheet to ActiveSheet and no
other
chart on the sheet with that name (subject protection).

Using a macro I tried to activate the chart with the command

Worksheets(2).ChartObjects(1).Activate

this however did not activate the chart.

If however I change the command to

Worksheets(2).ChartObjects("Chart 75").Activate

the chart is activated ("Chart 75" is the name of the chart as it
appears
on
the top of the widow that pops up if you right click on the chart and
select
Chart Window).

Not sure why ChartObjects(1) fails but ChartObjects("Chart 75") works,
there's obviously at least one chartobject on the sheet.

This name (on the Chart Window) changes everytime the chart is
redrawn.

You mean each time you deleate & recreate a chart. The number will
increment
to the total number of objects that have 'ever' been added to the sheet.
The
counter is only reset if the wb & sheet is saved with no objects.

Question 2: How can I select the chart on the desired sheet?

Need to activate the sheet first.

Question 3: Can I somehow extract the name as it appears on the Chart
Window?

Activesheet.Chartobjects.Chart.Name returns 'sheetname chartname' which
will
be prefixed with the sheetname (the chartwindow also includes
[wb-name]).
It's actual name though for referencing purposes is -
Activesheet.Chartobjects(1).Name or ActiveChart.Parent.Name

I do not know if it has anything to do with it, but the chart on sheet
2
was
placed as a result of a comboBox_Change code. ComboBox is on sheet 1.

Not directly related

Regards,
Peter T

 

[Peter T]

Sometimes the apparently impossible happens!

I suggested double checking with code to confirm you only have one
chartobject. If you have a (say hidden) chart named "Chart 1" it would
explain both why you cannot select ChartObjects("Chart 75") using the code
ChartObjects(1) and cannot rename it as "Chart 1".

It would only take a few seconds to test and 100% eliminate the impossible
possibility.

Regards,
Peter T

I am quite sure because each time before any data / chart was put on the
sheet cells.delete was used to delete the sheet of any previous data / chart.
I have used the command activesheet.chartobjects(1).activate previously and
it works but for some strange reasons it is not working here. This case is a
good one for head scratching. In fact just to test I copied the data from
this sheet onto another sheet and made a chart and the above command
activated the chart.

Thanks and regards.
Farooq

Did you programmatically check how many chartobjects exit on the sheet.

Regards,
Peter T

Thanks Peter. I used the name as obtained from ActiveChart.Parent.Name

to
get

the desired results.

Thanks a lot.

Farooq Sheri

:

Sometimes it's necessary to deselect some other chart first, particularly if
it's in a window. Also sometimes necessary to select the .Chart if

it
was

selected as a chartobject. But if the current selection is say a

cell I
have

no idea why referring to it by it's index number fails but works

with
it's

name.

Are you absolutely sure there's only one chartobject, eg you didn't once
assume deleting all the rows it's in would delete it.
In the immediate window (ctrl-g) type
?activesheet.chartobjects.count
and press enter

Regards,
Peter T

Thanks Peter for the detailed reply. There is no typo with the command
ActiveSheet.ChartObjects(1).Name = "chart 1" within my code.

At any given time there is only one chart on the sheet so it

really
beats

me
why the command Worksheets(2).ChartObjects(1).Activate would not activate
the chart (the sheet is already activated).

Although I am still struggling with it but thank you for your reply. I
will
try using the chart name as suggested by you
(Activesheet.Chartobjects(1).Name or ActiveChart.Parent.Name) and

see
if I

can get the chart activated.

Regards
Farooq

:

Comments in line -

I have a embedded chart (there is only one chart) on a sheet.

I
tried

naming
it with

ActivesSheet.ChartObjects(1).Name = "chart 1"

Question 1: did the above statement name the chart object or

the
chart

contained within the chart object?

It should do if you amend the typo ActivesSheet to ActiveSheet

and
no

other
chart on the sheet with that name (subject protection).

Using a macro I tried to activate the chart with the command

Worksheets(2).ChartObjects(1).Activate

this however did not activate the chart.

If however I change the command to

Worksheets(2).ChartObjects("Chart 75").Activate

the chart is activated ("Chart 75" is the name of the chart as it
appears
on
the top of the widow that pops up if you right click on the

chart
and

select
Chart Window).

Not sure why ChartObjects(1) fails but ChartObjects("Chart 75") works,
there's obviously at least one chartobject on the sheet.

This name (on the Chart Window) changes everytime the chart is
redrawn.

You mean each time you deleate & recreate a chart. The number will
increment
to the total number of objects that have 'ever' been added to

the
sheet.

The
counter is only reset if the wb & sheet is saved with no objects.

Question 2: How can I select the chart on the desired sheet?

Need to activate the sheet first.

Question 3: Can I somehow extract the name as it appears on

the
Chart

Window?

Activesheet.Chartobjects.Chart.Name returns 'sheetname

chartname'
which

will
be prefixed with the sheetname (the chartwindow also includes
[wb-name]).
It's actual name though for referencing purposes is -
Activesheet.Chartobjects(1).Name or ActiveChart.Parent.Name

I do not know if it has anything to do with it, but the chart

on
sheet

2
was
placed as a result of a comboBox_Change code. ComboBox is on

sheet
1.

Not directly related

Regards,
Peter T