C80 cleaned heads now dead

G

Guest

I have an Epson C80 I used about half the new cartridges then it set for 6
months. Tried the Windex in tubes and printed colors, but not black.
Removed print head unit and soaked in Windex, warm water, alcohol. Now it
will not print anything? I don't know if I should try to disassemble the
head to check out electrical contacts? I could use some help on this one.
 
M

Mark Herring

Art Entlich has a nice cleaning tutorial. He asks that it only be
distributed by e-mail requests to him:

Arthur Entlich <artistic-1ATshawDOTca>

Above address is anti-spammed---replace AT and DOT with the obvious

-Mark

I have an Epson C80 I used about half the new cartridges then it set for 6
months. Tried the Windex in tubes and printed colors, but not black.
Removed print head unit and soaked in Windex, warm water, alcohol. Now it
will not print anything? I don't know if I should try to disassemble the
head to check out electrical contacts? I could use some help on this one.

**************************
Mark Herring, Pasadena, Calif.
Private e-mail: Just say no to "No".
 
T

Tony1that matters

I have an Epson C80 I used about half the new cartridges then it set for
6
**************************
Mark Herring, Pasadena, Calif.
Private e-mail: Just say no to "No".
Mark Herring said:
Art Entlich has a nice cleaning tutorial. He asks that it only be
distributed by e-mail requests to him:

Arthur Entlich <artistic-1ATshawDOTca>

Above address is anti-spammed---replace AT and DOT with the obvious

-Mark
There's nothing in the Entlich manual that the user hasn't tried as it just
involve soaking and folded tissue to soak out the head crud if there.
BTW if you attempt to disassemble the C80 Piezo Quartz heads they will be
irretrievably ruined.
The C84 is a nice replacement and quite a bargain
Tony
Inkylink JetTec UK Quality - Wot others wanna-be
Epson 950 C70/80/82 Lighfast pigmented inks. Canon
BCI-3 i750 BCI-6 S-820 / S-900 series.
www.aah-haa.com
 
G

Guest

The C84 is a printer or a head for the C80?
Tony1that matters said:
for
There's nothing in the Entlich manual that the user hasn't tried as it just
involve soaking and folded tissue to soak out the head crud if there.
BTW if you attempt to disassemble the C80 Piezo Quartz heads they will be
irretrievably ruined.
The C84 is a nice replacement and quite a bargain
Tony
Inkylink JetTec UK Quality - Wot others wanna-be
Epson 950 C70/80/82 Lighfast pigmented inks. Canon
BCI-3 i750 BCI-6 S-820 / S-900 series.
www.aah-haa.com
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top