Big LBA and Adaptec 2400A controller

G

Guest

When formatting a hard disk of 300GB connected to a controller RAID Adaptec
2400A (updated with the latest BIOS) there are severe stability problems,
i.e. the computer awaits indefinitely the end of the process and the partion
results to be corrupted. The same disk connected to an IDE channel of the
mainboard has no problem. We thank very much for any help.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Adaptec 2400A Speed on WindowsXP 5
Dell & Windows XP Pro SP1 & Adaptec ATA RAID 1200A Install Instructions 0
Boot problems with Maxtor ATA/133 and Adaptec 2940UW 2
How to make a system boot from a PCI IDE Controller? 25
Replace Adaptec 2010s Raid Controller 4
PCI Low Transfer with Adaptec 2100S SCSI RAID 0 3
Big Partition (900gb) with Windows XP Home 3
XP pro won't recognize Adaptec AHA2940UW SCSI controller 6

Top