Bad RAM workaround possible?

G

Guest

One of the ram modules in my computer has sudden developed a fault that
prevents Vista from booting up without causing a bluescreen. If I run the
memory diagnostic it says there is an error, and then the subsequent reboot
will let Vista boot up. And this is now the only procedure that lets Vista
boot up. It blue screens on boot up even in Safe Mode. Well, anyway, once I
have run the memory diagnostic tool and gotten Vista to fully boot, it
appears to work just fine. What I would like to know, is if there is a way to
force Vista to boot up without me having to first run the memory diagnostic
tool? I will be replacing the module that is faulty but until then, it would
be nice to have a temporary workaround. Perhaps even something I could use to
tell the OS to simply not use the 16 MB region where the fault exists. Anyone?
 
C

Colin Barnhorst

If no one in the general group has an idea, you might try the folks in
microsoft.public.windows.vista.hardware_devices. Those folks are pretty
savvy.
 
G

Guest

Good idea.

Colin Barnhorst said:
If no one in the general group has an idea, you might try the folks in
microsoft.public.windows.vista.hardware_devices. Those folks are pretty
savvy.
 
N

newfox

try making the ram speed slower...
or increase the latency or the other settings in the bios...

If the ram sticks are not identical, it may not be a true "fault" but an
incompatibility
due to different brands- types. I have seen this all the time, in fact one
of my computers needs to adjust the bios making the ram to run a bit slower
so everything can work ok...

try it, and tell me if it helped :)
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top