AutoFilter: Loop Thru Visible Rows?

G

Guest

I'm working on summarizing a reconsillation statement. My code is supposed
to apply an autofilter based on fixed criteria. That part works. Next it
should insert formulas into the filtered/visible cells to create in-line
subtotals. The formulas are inserted into Columns "I" and "J" of the visble
rows. I haven't figured out how to accomplish this feat. (I've labeled
custom subroutines) My code is as follows:

Sub AutoFilterAndSummarize()
'Macro for Step II of Air Travel Bill Processor. This module condenses
the entries by KEY,
'enabling each transaction to appear as a single line in the datafile.
Dim StartTargetRange As Range
Dim EndTargetRange As Range
Dim x As Integer

'Disable Sheet Protection and select entire dataset
ShieldsDown 'Custom Subroutine to disable protection
Workbooks("Travel.xls").Activate
SelectCurrentRegion 'Custom Subroutine to select current data set

'Isolate Valid Records as a Cautionary Measure.
'Technically no invalid records should remain when this step is run.
'But this code will allow availible information to be summarized.
Selection.AutoFilter Field:=13, Criteria1:="=||*", Operator:=xlAnd
Selection.Subtotal GroupBy:=13, Function:=xlSum, TotalList:=Array(8), _
Replace:=True, PageBreaks:=False, SummaryBelowData:=True

'Insert blank columns for Service Fee and Transaction Total columns
Columns("I:I").Select
Selection.Insert Shift:=xlToRight
Selection.Insert Shift:=xlToRight

Dim Visibility As Range, RowState As String, i As Integer
LastRow = Cells(Cells.Rows.Count, "A").End(xlUp).Row

<<<PROBLEM LOOP!!! INSERT FORMULAS & CAPTURE 1ST & LAST ROW VALUES OF
FILTERED/VISIBLE DATA>>>
'ReDim RowState(1 To ActiveSheet.UsedRange.Rows.Count)
x = 0
i = -1
For Each RowState In ActiveSheet.AutoFilter.Range.Rows
i = i + 1
If RowState.EntireRow.Hidden = False Then
RowState.Cells(i, 9).Activate
ActiveCell.FormulaR1C1 = "=IF(RC[-5]=""ARC Automated Serv
Fee"",RC[-1],"""")"
RowState.Cells(i, 10).Activate
ActiveCell.FormulaR1C1 =
"=IF(ISBLANK(OFFSET(RC,1,-3)),OFFSET(RC,1,-2),"""")"
If x < 1 Then
StartTargetRange = Rows(i, 9)
x = 1
End If
End If
EndTargetRange = Rows(i, 9)
Next
<<<END OF PROBLEM LOOP!!!>>>

'Copy relative values to temp spreadsheet, paste, and copy back absolute
values
'So subtotal lines and "ARC Automated Serv Fee" lines can be deleted in
another step.
Range("I:J", Selection.End(xlDown)).Select
Selection.SpecialCells(xlCellTypeVisible).Select
Selection.Copy
Sheets("Unmatched").Select
Range("A1").Select
ActiveSheet.Paste
Rows("1:1").Select
Application.CutCopyMode = False
Selection.Insert Shift:=xlDown
Range("A1").Select
Sheets(1).Select

Range("A1:O1").Select
Range("O1").Activate
Selection.Copy
Sheets("Unmatched").Select
Range("A1").Select
ActiveSheet.Paste
Range("E8").Select
ShieldsUp ''Custom Subroutine to Enable document protection with
special parameters
End Sub


The first formula calculates fee values by subtracting non-fee charges from
the transaction total. The second provides the transaction total. There may
well be a MUCH shorter, easier way to accomplish this task, and I'd love to
know about it!

Can anyone help me make this work? Thanks in advance!

Sincerely,
Damian Carrillo



PS: The part of the code I can't make work is based loosely on a post from
April 2005. I thought it might be adequate for my purposes, unfortunately I
quite understand how to modify the loop to work for my purposes.


Subject: Re: AutoFilter, Looping through the Rows? (Newbie) 4/12/2005
11:00 AM PST
By: Tom Ogilvy In: microsoft.public.excel.programming


Dim vArr(0 to 6)
i = -1
for each rw in ActiveSheet.Autofilter.Range.rows
if rw.Entirerow.Hidden = False then
i = i + 1
vArr(i) = rw.Cells(1,1).Value
end if
Next

header row will be in varr(0)

--
Regards,
Tom Ogilvy

------------------------------------------------

Hi,
I've set an AutoFilter on Date and Company Name. COLUMNS:
Date, Reference Number, Goods
G-VAT, Cheque Number, Services
S-VAT, New Balance, Previous Balance
Company Name

It selects 6 rows, as expected. I'm required to pre-process each row for
certain column information, i.e. ignore Cheque Number and Previous Balance.
How can I read into an array, a line at a time, and loop round all the
selected Rows?

Thanks in advance,
Mark.
 
G

Guest

Damian

I haven't worked my way through all of your code but hopefully this will
help. The following code autofilters data on a sheet, adds two columns (I and
J) and then inserts formulas into the visible cells in columns I and J.

Sub AddFormula()

Dim endRow As Long

Selection.AutoFilter Field:=8, Criteria1:="Y"

Range("I1").EntireColumn.Insert
Range("I1").EntireColumn.Insert

endRow = Cells(Rows.Count, 8).End(xlUp).Row

Range(Cells(2, 9), Cells(endRow, 9)). _
SpecialCells(xlCellTypeVisible).FormulaR1C1 _
= "=IF(RC[-6]>20,""My First Formula"","""")"

Range(Cells(2, 10), Cells(endRow, 10)). _
SpecialCells(xlCellTypeVisible).FormulaR1C1 _
= "=IF(RC[-9]>20,""My Second Formula"","""")"

End Sub

Regards
Rowan

Damian Carrillo said:
I'm working on summarizing a reconsillation statement. My code is supposed
to apply an autofilter based on fixed criteria. That part works. Next it
should insert formulas into the filtered/visible cells to create in-line
subtotals. The formulas are inserted into Columns "I" and "J" of the visble
rows. I haven't figured out how to accomplish this feat. (I've labeled
custom subroutines) My code is as follows:

Sub AutoFilterAndSummarize()
'Macro for Step II of Air Travel Bill Processor. This module condenses
the entries by KEY,
'enabling each transaction to appear as a single line in the datafile.
Dim StartTargetRange As Range
Dim EndTargetRange As Range
Dim x As Integer

'Disable Sheet Protection and select entire dataset
ShieldsDown 'Custom Subroutine to disable protection
Workbooks("Travel.xls").Activate
SelectCurrentRegion 'Custom Subroutine to select current data set

'Isolate Valid Records as a Cautionary Measure.
'Technically no invalid records should remain when this step is run.
'But this code will allow availible information to be summarized.
Selection.AutoFilter Field:=13, Criteria1:="=||*", Operator:=xlAnd
Selection.Subtotal GroupBy:=13, Function:=xlSum, TotalList:=Array(8), _
Replace:=True, PageBreaks:=False, SummaryBelowData:=True

'Insert blank columns for Service Fee and Transaction Total columns
Columns("I:I").Select
Selection.Insert Shift:=xlToRight
Selection.Insert Shift:=xlToRight

Dim Visibility As Range, RowState As String, i As Integer
LastRow = Cells(Cells.Rows.Count, "A").End(xlUp).Row

<<<PROBLEM LOOP!!! INSERT FORMULAS & CAPTURE 1ST & LAST ROW VALUES OF
FILTERED/VISIBLE DATA>>>
'ReDim RowState(1 To ActiveSheet.UsedRange.Rows.Count)
x = 0
i = -1
For Each RowState In ActiveSheet.AutoFilter.Range.Rows
i = i + 1
If RowState.EntireRow.Hidden = False Then
RowState.Cells(i, 9).Activate
ActiveCell.FormulaR1C1 = "=IF(RC[-5]=""ARC Automated Serv
Fee"",RC[-1],"""")"
RowState.Cells(i, 10).Activate
ActiveCell.FormulaR1C1 =
"=IF(ISBLANK(OFFSET(RC,1,-3)),OFFSET(RC,1,-2),"""")"
If x < 1 Then
StartTargetRange = Rows(i, 9)
x = 1
End If
End If
EndTargetRange = Rows(i, 9)
Next
<<<END OF PROBLEM LOOP!!!>>>

'Copy relative values to temp spreadsheet, paste, and copy back absolute
values
'So subtotal lines and "ARC Automated Serv Fee" lines can be deleted in
another step.
Range("I:J", Selection.End(xlDown)).Select
Selection.SpecialCells(xlCellTypeVisible).Select
Selection.Copy
Sheets("Unmatched").Select
Range("A1").Select
ActiveSheet.Paste
Rows("1:1").Select
Application.CutCopyMode = False
Selection.Insert Shift:=xlDown
Range("A1").Select
Sheets(1).Select

Range("A1:O1").Select
Range("O1").Activate
Selection.Copy
Sheets("Unmatched").Select
Range("A1").Select
ActiveSheet.Paste
Range("E8").Select
ShieldsUp ''Custom Subroutine to Enable document protection with
special parameters
End Sub


The first formula calculates fee values by subtracting non-fee charges from
the transaction total. The second provides the transaction total. There may
well be a MUCH shorter, easier way to accomplish this task, and I'd love to
know about it!

Can anyone help me make this work? Thanks in advance!

Sincerely,
Damian Carrillo



PS: The part of the code I can't make work is based loosely on a post from
April 2005. I thought it might be adequate for my purposes, unfortunately I
quite understand how to modify the loop to work for my purposes.


Subject: Re: AutoFilter, Looping through the Rows? (Newbie) 4/12/2005
11:00 AM PST
By: Tom Ogilvy In: microsoft.public.excel.programming


Dim vArr(0 to 6)
i = -1
for each rw in ActiveSheet.Autofilter.Range.rows
if rw.Entirerow.Hidden = False then
i = i + 1
vArr(i) = rw.Cells(1,1).Value
end if
Next

header row will be in varr(0)

--
Regards,
Tom Ogilvy

------------------------------------------------

Hi,
I've set an AutoFilter on Date and Company Name. COLUMNS:
Date, Reference Number, Goods
G-VAT, Cheque Number, Services
S-VAT, New Balance, Previous Balance
Company Name

It selects 6 rows, as expected. I'm required to pre-process each row for
certain column information, i.e. ignore Cheque Number and Previous Balance.
How can I read into an array, a line at a time, and loop round all the
selected Rows?

Thanks in advance,
Mark.
Click to expand...
 
G

Guest

Rowan,

A very belated thank you for the help! Your method worked so well I have
started using it for setting cell values in all my projects! I was so
excited when I first read the post weeks ago and found that it worked! But I
forgot to respond! My apologies and thanks again!

Damian
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Transfer array element offset value to a matched value 3
Loop Repeats - PLS HELP 2
Loop to copy paste rows base on table arrays 0
Autofilter problem 7
autofill to visible cells only 5
File Name changes with dates and Deleting Rows of Zeros 0
after autofilter/delete rows left not visible 1
Complie Syntax Error 6

Top