Assigning a Gateway address

[Powlaz]

I'm VERY new at this. Please bear with me. My server is
configured for DHCP. However, when configuring it we left
out the gateway ID (which points to the firewall and would
allow internet access for everyone. The plan was to
manually enter the firewall's gateway ID onto each machine
that was allowed to access the Internet.)
This has proven to be a bothersome plan. The worst part
is I can't remember where to find the screen that we put
the DNS addressess and Gateway ID in.

Please help.

Matt

 

[Robert L [MS-MVP]]

go to my network places, right-click on LAN connection, double-click on
tcp/ip.

--
For more and other information, go to http://www.ChicagoTech.net

Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Robert Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on
http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.

 

[Guest]

-----Original Message-----
go to my network places, right-click on LAN connection, double-click on
tcp/ip.

--
For more and other information, go to http://www.ChicagoTech.net

Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Thank you anyway. The answer I was looking for was:

(On the Server)
Administrative Services
DHCP
Server Options
Check the Router Box
Add the Gateway ID (Firewall address)

Matt