Any tips on getting a AMD mobile 2500 to maxium possible speed ?

[OCZ Guy]

Any tips on getting a AMD mobile 2500 to maxium possible speed ?

Using Abit NF7-S 2.0, bios 24 latest i think.


Ive got it to 13 X 200 2600 ghz, 43c idle though not tested and
running at that now, its at 1.9 volts might not need that to get it
but put it their so it would atleast boot

I tried 13.5 2700 ghz but pc just failed to boot.

Iam using pc3200 OCZ LL Platium Ram and can get 200 fsb easy, should i
try lower multipler and higher FSB, would that make a difference.

I just have no idea what other settings in the bios may effect a good
overclock, i mean at 43 idle the cpu has plenty ot room to overclock
just need the right settings to do so.


Just having fun and seeing how much i can push the cpu, would like to
try to go over 2.7 ghz on air :0, if i can do that might try water
cooling and try for 3.0 :-0, though that would be pushing it.


If you can help please do, iam having so much fun overclocking.

Thanks again.

 

[AJ]

Any tips on getting a AMD mobile 2500 to maxium possible speed ?

Using Abit NF7-S 2.0, bios 24 latest i think.


Ive got it to 13 X 200 2600 ghz, 43c idle though not tested and
running at that now, its at 1.9 volts might not need that to get it
but put it their so it would atleast boot

I tried 13.5 2700 ghz but pc just failed to boot.

Iam using pc3200 OCZ LL Platium Ram and can get 200 fsb easy, should i
try lower multipler and higher FSB, would that make a difference.

I just have no idea what other settings in the bios may effect a good
overclock, i mean at 43 idle the cpu has plenty ot room to overclock
just need the right settings to do so.


Just having fun and seeing how much i can push the cpu, would like to
try to go over 2.7 ghz on air :0, if i can do that might try water
cooling and try for 3.0 :-0, though that would be pushing it.


If you can help please do, iam having so much fun overclocking.

Thanks again.

That's very good. Barton's hate .5 multi. I don't have that board but
have many NF2. Put everything to a setting rather than "auto". Lock
RAM to 100% or 1/1 however it's listed. AGP lock at 66MHz. Turn off
agp fastwrite. Sometimes the RAM and AGP want a little extra juice or
cooling. Make small FSB increases over days to burn in the RAM.

 

[OCZ Guy]

Ive been running it at 2500 for a day now left it on when i went to
work, ill try 13x210 my ram should do that easy.

Ok ill do as you say master.