America's Army dosen't work

[David]

I have a upgrated eMachines T2040.

When I run the Game America's Army, it displays an error
message "general protection falt". When I ran the system
hardware check, it said my video card does not have enough
memory. It says the minimum requirment is 32mb. I have 64
mb. It also says I dont have at least DirectX 8.1, even
though I have 9.0b. America's Army specificly says on the
site my video card it supported, and the driver
installation disk evem came with a copy of america's army!
The game used to work, and i would appresiate it if
someone could help me! I am running a Gforce4 FX PCI card
with 64 mb of memory. The game says AGP is required, but
like i said, it worked before and America's Army came with
the card!

 

[david]

-----Original Message-----
I have a upgrated eMachines T2040.

When I run the Game America's Army, it displays an error
message "general protection falt". When I ran the system
hardware check, it said my video card does not have enough
memory. It says the minimum requirment is 32mb. I have 64
mb. It also says I dont have at least DirectX 8.1, even
though I have 9.0b. America's Army specificly says on the
site my video card it supported, and the driver
installation disk evem came with a copy of america's army!
The game used to work, and i would appresiate it if
someone could help me! I am running a Gforce4 FX PCI card
with 64 mb of memory. The game says AGP is required, but
like i said, it worked before and America's Army came with
the card!
.

hey, i have the same problem, every time i start

america's army my computer reset.So if you have the
answer tell me, thx

 

[Jimmy S.]

Hi David (and david),

Let's do a diagnostic of your system to see what could be the problem.
If we can eliminate your system hardware and configuration problems
from the equation, it will be easier to find the solution for each of you.

In order to Create a dxdiag.txt file: Click Start / Run / type: DXDIAG
Click the "Test" buttons in the Display, Sound, Music & Network Tabs;
Afterwards click the "Save All Information..." button in the bottom row.

Send the Dxdiag file: Click Insert / File Attachment using Outlook Exp.,
or open the file in notepad, click Edit / Select All / Copy and then Paste
the data into your reply using the Ctrl+V command. Hope this helps!

--
Cheers, Windows XP MVP Shell / User
Jimmy S. http://mvp.support.microsoft.com

Game FAQs: http://support.microsoft.com/default.aspx?scid=FH;[LN];gms
Visit my Zone.com / Gaming Helpsite: http://nibblesnbits.tk or Call / Contact
MS Support at: http://support.microsoft.com/default.aspx?scid=sz;en-us;top
My advice is donated "AS IS" without warranty; nor do I confer any rights.
_________________________________________________________

| I have a upgrated eMachines T2040.
|
| When I run the Game America's Army, it displays an error
| message "general protection falt". When I ran the system
| hardware check, it said my video card does not have enough
| memory. It says the minimum requirment is 32mb. I have 64
| mb. It also says I dont have at least DirectX 8.1, even
| though I have 9.0b. America's Army specificly says on the
| site my video card it supported, and the driver
| installation disk evem came with a copy of america's army!
| The game used to work, and i would appresiate it if
| someone could help me! I am running a Gforce4 FX PCI card
| with 64 mb of memory. The game says AGP is required, but
| like i said, it worked before and America's Army came with
| the card!