L
Louise
I presently have 2 dimms of Kingston 512 installed with the following
specs:
Kingston Technology Kingston 512MB 400MHz DDR Non-ECC CL3 (3-3-3) DIMM
I see Newegg has Crucial dimms with these specs:
Manufacturer: Crucial
Speed: DDR400(PC3200)
Type: 184-Pin DDR SDRAM
Error Checking: Non-ECC
Registered/Unbuffered: Unbuffered
Cas Latency: 2
Support Voltage: 2.8V
Organization: 64M x 64 -Bit
Warranty: Lifetime
Can I mix these two (two dimms of each). Would the shorter latency of
the Crucial ram have a positive effect even though the latency of the
existing Kingston is more? Or would it be better to stick
with more of the Kingston that I already have?
I also saw 3D memory at memory4less with the same specs as the Kingston
- anything better about 3D memory?
TIA
Louise
specs:
Kingston Technology Kingston 512MB 400MHz DDR Non-ECC CL3 (3-3-3) DIMM
I see Newegg has Crucial dimms with these specs:
Manufacturer: Crucial
Speed: DDR400(PC3200)
Type: 184-Pin DDR SDRAM
Error Checking: Non-ECC
Registered/Unbuffered: Unbuffered
Cas Latency: 2
Support Voltage: 2.8V
Organization: 64M x 64 -Bit
Warranty: Lifetime
Can I mix these two (two dimms of each). Would the shorter latency of
the Crucial ram have a positive effect even though the latency of the
existing Kingston is more? Or would it be better to stick
with more of the Kingston that I already have?
I also saw 3D memory at memory4less with the same specs as the Kingston
- anything better about 3D memory?
TIA
Louise