Why do you need one?
You can get USB to PS/2 adapter cables for a few dollars. These will allow
connection of both a PS/2 keyboard and mouse. However, sometimes results
are not optimal.
One assumption here - the hub came with an external supply which you prefer
not to use - not enough outlets maybe. Anyway - it appears you would have to
re-wire the power lead - so why not just tap 5 volts off the
motherboard/power supply
Another thought - would the card provide the minimum current requirements
taking into consideration the number of USB ports to be utilized.
Thanx AJR, u seem to be aware of my problem; the external connector
supplied with the hub was only a cable to tap into a PS2 Din connection
(which I don't have), the other end has a mini plug (like a floppy drive
hook up)that goes into the USB hub
I would just as soon tap in to the MB power supply, if I knew how and
what I would need to do it. I don't know where I could find one of these
mini cables, searching has produced zero so far.
Cheers-Herb.
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.
