A8N SLI and 20Pin Enermax PSU?

R

Roman

Hi,

i'm running a CUSL2-C with a 420 Watt Enermax PSU 20Pin Connector
Pentium 4 approved.

Can i use this Power Supply for my new system with a A8N-SLI and 3000+
Athlon 64. or do i need a new 24Pin Power supply?


Thanks
 
E

edde

Yup, you can use it.
I am using a 350W Enermax and it's perfect.
You just need to buy a 20-24pin converter (less than $10)
 
C

Cynoclast

Or you can just plug in the 4 pin ATX connector and the 20 pin into the
24 pin port on the mb...Provided your power supply has a 4 pin
connector in addition to the ATX 20 pin on.

I'm currently using an Antec Truepower 550 (ATX) with an A8N-SLI Deluxe
w/Radeon X800 XT with no power issues.
 
B

BrianMarleneLang

I have a okia 600 wt with a 20 pin pwr cntr with no 20-24 adapter and it
runs perfectly ,so I imagine any high powered power supply with only a 20
pin would work fine ,but I would look up your PS and make sure it has at
least24 amp on the 12vt line .
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top