24 hour format

L

Laksh

Please let it be known that MSAS does not accept 24 hour
format time.
My PC is on 24 hour time format and even though the 24 hr
format time is shown in MSAS for scheduling for the
programme to start, it reverts back to standard time.
For instance 1900 hrs is shown as 0700 hrs AM.
Please have this issue looked into.
Thanks
Sincerely
Laksh
 
M

Mikolaj

Please let it be known that MSAS does not accept 24 hour
format time.
My PC is on 24 hour time format and even though the 24 hr
format time is shown in MSAS for scheduling for the
programme to start, it reverts back to standard time.
For instance 1900 hrs is shown as 0700 hrs AM.
Please have this issue looked into.
Thanks
Sincerely
Laksh
Click to expand...

This is known bug in current MSAS release. If you want to schedule the
scanning in the afternoon, do the following:

1. Close MSAS
2. In control panel "Regional and Language Options", button "Customize", tab
"Time", configure a 12-hour AM/PM time format.
3. Open MSAS, configure your desired schedule in 12-hour AM/PM format, click
"Save", close MSAS.
4. In control panel "Regional and Language Options", button "Customize", tab
"Time", re-configure your preferred 24-hour time format.



Then your scheduled event should occur at your desired time, even if the
displayed time in MSAS looks wrong.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Converting from 12-hour to 24-hour format 2
How do i get the clock to show 24 hour time instead of 12 hour? 1
instruction on how to make a 24 HOUR TIME COLUMN 1
24 Hour Clock Calculations 1
add/sub time/hour tracking in 24 clock format 1
display time in 12 hour format 1
Time resets to 24 hour format 2
Scan Schedule does not like 24-hour format 1

Top