2000 pro to XP and lost slave drives.

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I have gont ot XP fro 2000 and had my 2 Maxtor slave drives on a SI l680 ATA
133
controler card. I was unable to get XP to load with the card so I removed
it and after replacing it the drives do not show up. They are in the Bios
and the driver for the card is in and working corectly. I took one off and
made it a secondary on the to the boot and they still are gone. Any Idea
what is going on?
Thanks
 
Dave said:
I have gont ot XP fro 2000 and had my 2 Maxtor slave drives on a SI l680 ATA
133
controler card. I was unable to get XP to load with the card so I removed
it and after replacing it the drives do not show up. They are in the Bios
and the driver for the card is in and working corectly. I took one off and
made it a secondary on the to the boot and they still are gone. Any Idea
what is going on?
Thanks
Click to expand...

see if the drives show up in disk management...
and if so...you need to assign them drive letters
 
You must log in or register to reply here.

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Get drive letter for old slave hard drive while keeping data 2
master & slave assembly 7
How to disable a Primary Slave Drive 1
Hard Drive, Master Slave 9
Putting a Seagate U6 Model ST360020A HD as a slave 11
Transferring XP and an XP Slave drive 3
Installing a new hard drive 1
XP PRO does not recognize 3rd HDD 2

Back
Top