16 Bit Windows Subsystem

[Guest]

i hope that someone out theres can help me -
When the PC starts or you try to install any software you get the following
message.

c:\windows\system32\autoexe.NT and then it says the system file is not
suitable for running MS-DOS + windows applications (choose close to
terminate)
I have no idea why I get this message and have no idea how to put it right.

Would really appreciate any help

Regards
UK - Cobweb

 

[Rick \Nutcase\ Rogers]

Hi,

Create a new autoexec.nt file and save it to the \windows\system32 folder.

Click start/run and type notepad, then click ok. Copy/paste the below code
into it (instead of typing it in to prevent errors), then click file/"save
as". Navigate to the C:\Windows\system32 folder, change the "save as file"
type to "all types" and name the file autoexec.nt, then click save (if
prompted to overwrite the existing one, do so).

@echo off
lh %SystemRoot%\system32\mscdexnt.exe
lh %SystemRoot%\system32\redir
lh %SystemRoot%\system32\dosx
SET BLASTER=A220 I5 D1 P330 T3

Reboot when finished. This usually fixes it, but you will find further steps
here if it doesn't:

Error message when you install or start an MS-DOS or 16-bit Windows-based
program
http://support.microsoft.com/?kbid=324767

Basically, you will have to expand new copies of command.com, autoexec.nt,
and config.nt to the system32 folder from the WinXP CD or I386 folder on
your hard drive, or copy them from the C:\Windows\repair folder to the
C:\Windows\system32 folder. Sometimes, you need to create new ones and
overwrite the existing ones - the method is described in the article.

--
Best of Luck,

Rick Rogers, aka "Nutcase" - Microsoft MVP

Associate Expert - WindowsXP Expert Zone

Windows help - www.rickrogers.org

 

[Torgeir Bakken \(MVP\)]

i hope that someone out theres can help me -
When the PC starts or you try to install any software you get the following
message.

c:\windows\system32\autoexe.NT and then it says the system file is not
suitable for running MS-DOS + windows applications (choose close to
terminate)
I have no idea why I get this message and have no idea how to put it right.

Hi

Your autoexec.nt problem is most likely caused by a worm or if you have
WinXP SP2 and AVAST (antivirus software) installed, it also can cause
this error.

To solve the problem:

Error message when you install or start an MS-DOS or 16-bit
Windows-based program
http://support.microsoft.com/default.aspx?scid=kb;en-us;324767

Alternatively:

You can put back the standard version of autoexec.nt/config.nt by
copying a backup copy held in %windir%\repair\ to %windir%\system32\
(%windir% is typically C:\Windows) instead of using the procedure in
the KB article above.


Could be caused a trojan or something similar, e.g.
TrojanDownloader.Win32.Dia.a, more about this here:
http://groups.google.com/[email protected]

Also, AVAST (antivirus software) can be the cause if you
have WinXP SP2 installed:
http://groups.google.com/[email protected]