XP pro Repair

G

Guest

I'm installing a new motherboard and processor and want to know if the
repair option install will work for me.
I'm swapping out my asus A7N8X-E Deluxe and AMD Athlon 3000+ for a K8N-E
Deluxe and AMD Athlon 64 3400+. Everything else is the same setup just the
CPU and Board are diffiernt, I'd rather not have to reinstall Windows XP Pro
and all my programs if I don't have to.
 
J

Jupiter Jones [MVP]

Normally a Repair Installation will be required to properly detect the new
hardware.
Data should be safe, back-up all important data just in case.
 
B

Bruce Chambers

djcgamer said:
I'm installing a new motherboard and processor and want to know if the
repair option install will work for me.
I'm swapping out my asus A7N8X-E Deluxe and AMD Athlon 3000+ for a K8N-E
Deluxe and AMD Athlon 64 3400+. Everything else is the same setup just the
CPU and Board are diffiernt, I'd rather not have to reinstall Windows XP Pro
and all my programs if I don't have to.


Normally, and assuming a retail license (many OEM installations
and licenses are not transferable to a new motherboard - check yours
before starting), unless the new motherboard is virtually identical
(same chipset, same IDE controllers, same BIOS version, etc.) to the
one on which the WinXP installation was originally performed, you'll
need to perform a repair (a.k.a. in-place upgrade) installation, at
the very least:

How to Perform an In-Place Upgrade of Windows XP
http://support.microsoft.com/directory/article.asp?ID=KB;EN-US;Q315341

The "why" is quite simple, really, and has nothing to do with
licensing issues, per se; it's a purely technical matter, at this
point. You've pulled the proverbial hardware rug out from under the
OS. (If you don't like -- or get -- the rug analogy, think of it as
picking up a Cape Cod style home and then setting it down onto a Ranch
style foundation. It just isn't going to fit.) WinXP, like Win2K
before it, is not nearly as "promiscuous" as Win9x when it comes to
accepting any old hardware configuration you throw at it. On
installation it "tailors" itself to the specific hardware found. This
is one of the reasons that the entire WinNT/2K/XP OS family is so much
more stable than the Win9x group.

As always when undertaking such a significant change, back up any
important data before starting.

This will also probably require re-activation, unless you have a
Volume Licensed version of WinXP Pro installed. If it's been more
than 120 days since you last activated that specific Product Key,
you'll most likely be able to activate via the Internet without
problem. If it's been less, you might have to make a 5 minute phone
call.


--

Bruce Chambers

Help us help you:



You can have peace. Or you can have freedom. Don't ever count on having
both at once. - RAH
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top