WMF files not fully visible at 100% Zoom

G

Guest

I create dwgs in AutoCAD, then export as WMF files. When I insert a WMF file
into Word 2002 at 100% zoom, I can only see a partial image. But when I go to
150% zoom or higher, I can see the entire image. Image prints completely too.
Any ideas on how I can see the entire image at 100% zoom? Thanks in advance.
 
G

garfield-n-odie

Try reducing the hardware acceleration setting in Start | Control
Panel | Display | Advanced | Troubleshooting. You might also
check the website of the manufacturer of your graphics adapter to
see if an updated graphics driver available.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Way to get Word to go back to 100% zoom when maximized 6
wmf files not conveting correctly 3
Clip Art and WMF files 15
bottom of wrapped text not visible at times 1
WORD 2002 will not display ASPX clip files. 1
Open report at 100% zoom - how? 2
Insert Image... 1
Strange auto zoom when laptop is connected to projector 12

Top