Wireless Network for SP2

[kiros]

Hi all
I want to set up a wireless network for a home or small office.
So i click the "My Network Places" to set up.
It pop-up a Wireless Network Setup Wizard and i follow the step to do
it. But when i want to save my settings to usb flash drive, it always
show the message "The system canno find the file specified".
And i can't save my settings to usb flash drive.

It's ok in XP Pro SP2. But something wrong in XPE SP2.

Is some component missed?
What can i do? Anybody knows?

Thanks
Kiros

 

[Sean Liming \(eMVP\)]

Do you have the USB Mass storage Device and the USB Storage Device
components in the image? Is the image running stand alone from a C drive
partition?

Regards,

Sean Liming (eMVP)
Managing Director
SJJ Embedded Micro Solutions

Author of
Windows XP Embedded Supplemental Toolkit Covering XPe SP2
Windows XP Embedded Advanced
Windows NT Embedded Step-by-Step

All available at www.sjjmicro.com

XPe Center website: www.seanliming.com

To learn more about Windows XP Embedded, come to MEDC 2005 in Las Vegas!
www.medc2005.com

 

[kiros]

Hi
Yes, i have included USB Mass storage Device and the USB Storage Device

components and the usb storage device works fine.
But when i want to save my wireless settings to usb flash drive, it
still
show the message "The system canno find the file specified".

My image with two drives ( C: and X: ). The drive of X is ramdisk
drive.
So i think my image is running stand alone with C drive.

Thanks
Kiros

 

[Slobodan Brcin \(eMVP\)]

Kiros,

I guess that I'm too tired to think straing right now.
But what is your boot medium?

And what is the volume letter of USB storage?
Can you write some file to USB sotrage from XPe?

Regards,
Slobodan

 

[kiros]

Hi
My boot medium is DOM.
And the volume letter of USB storage is D.
I can write file to the USB storage from XPE.
This function works fine in XP Pro SP2 but not in XPE SP2.

The USB storage all works fine in XPE SP2.
But when i want to save my wireless settings to usb flash drive,
it always show the message "The system canno find the file specified".

Thanks
Kiros

 

[Slobodan Brcin \(eMVP\)]

Hi Kiros,

Are you saying following:
1. You can save your wireless settings on C: for instance without this error.
2. You have D: (USB disk) working and accessible for other file writes.
3. You can' save your wireless settings only on D: (USB disk).

If above it true then I'm clueless.

Sorry,
Slobodan

 

[KM]

Kiros,

Do you have the following components in your image?

"Network Setup Wizard"
"Universal Plug & Play"
"Primitive: msctf"
"Primitive: imm32"
"Netshell" (the latest one from SP2)

KM

 

[kiros]

Hi, Slobodan
I think the wireless settings just can be saved on flash drive.
I can't see the option that can be saved on C:.
The other two questions are right.
Thanks.

Hi, KM
I add all components but it still can't.
I don't know if it is a bug or just happen to my XPE image (XPE SP2).

Kiros

 

[KM]

Kiros,

This feature works fine on XP Pro SP2 so it should (theoretically) work on XPe SP2.
Did you try monitoring the Network Setup Wizard (when it comes to saving settings to the USB drive) with Filemon?
You may see the missing Dlls right away. Then it would be just a matter of finding proper components that contain those Dlls.

KM

 

[kiros]

Hi KM

I will try it.

Thanks
Kiros

 

[KM]

Kiros,

Also, just in case check it Universal Plug and Play works on your runtime.
If not (there is a missing a registry resource in the UPnP component), follow these steps to make it working:
1. Open the configuration in Target Designer, and locate the Extra Registry Data item located at the top of the list.
2. Ensure that HKEY_LOCAL_MACHINE is selected in the Root field.
3. Type "SOFTWARE\Microsoft\UPnP Device Host" in the Key Name field.
4. Type "Security.FBA" in the "Value Name" field.
5. Make sure that REG_SZ is selected in the Type field.
6. In the Value field, type:
DAR(A;CI;KA;;;BA)(A;CIIO;KA;;;CO)(A;CI;KA;;;LS)(A;CI;KA;;;SY)(A;CI;KR;;;BU)

--
Regards,
KM, BSquare Corp.

PS. This might not be directly related to your issue. But I saw UPnP requests made while Network Setup Wizard runs through the
"saving to a Usb Key" steps.

 

[kiros]

Hi KM
I just come back from CeBit in Hannover.
I see your message until yesterday.
I will try it.
Thanks
Kiros

Kiros,

Also, just in case check it Universal Plug and Play works on your runtime.
If not (there is a missing a registry resource in the UPnP

component), follow these steps to make it working:

1. Open the configuration in Target Designer, and locate the

Extra Registry Data item located at the top of the list.

2. Ensure that HKEY_LOCAL_MACHINE is selected in the Root field.
3. Type "SOFTWARE\Microsoft\UPnP Device Host" in the Key Name field.
4. Type "Security.FBA" in the "Value Name" field.
5. Make sure that REG_SZ is selected in the Type field.
6. In the Value field, type:
DAR(A;CI;KA;;;BA)(A;CIIO;KA;;;CO)(A;CI;KA;;;LS)(A;CI;KA;;;SY)(A;CI;KR;;;BU)

--
Regards,
KM, BSquare Corp.

PS. This might not be directly related to your issue. But I saw UPnP

requests made while Network Setup Wizard runs through the