T
Tom
nigel.cooper said:Hi
Situation - After installing XP (upgrade) on a previous computer, (that has
has since died) I have installed it on my new machine, not realizing that
the license only applied to one machine. Having obtained a new copy I would
like advice on how best to install it.
Given that the machine has been used for display and has programs that do
not relate to my current hardware enviroment, would it be advisable to
format drive C: and then -
A- Put the disk in the drive and wait ?
B- Install windows 98 (upgrade) then install windows XP
C- Do nothing (Put the disk in the drive and wait ?)
Nigel, if the previous installation of XP was from a "retail" version, then you can install it on another machine, as long as you remove it from the previous. If it was OEM, then that holds true that it is dead with the previous machine. I am going on that you have an "Upgrade" version, not a full install, and it is retail?
The condition where you cannot use the Upgrade retail; if the 98 on the dead PC was OEM then it is dead with the previous PC, if the 98 is retail, then you remove it, you can use it as a qualifier on the new machine for the Upgrade XP (if that is what you have?). Otherwise, you would need to purchase a 98/ME retail for the new machine to make the Upgrade version a valid one. You don't need to purchase a full install, if you can find a 98/ME disk, it is way cheaper, and perfectly acceptable.
For your purpose, I would recommend a clean install, as an Upgrade can do this (retail anyway).
Read here for instructions on a clean install:
http://michaelstevenstech.com/cleanxpinstall.html