What are the recommendations in using PCI / Win Modem

J

jmbsweb

I successfully upgraded my 400mhz IBM computer from W2k
to WinXp. However, my system no longer recognized my
modemd. I have 2 ISA and 2 PCI internal modems, but I am
getting no where. Only one of the PCI modems receives a
message of "new hardware added" when installed. It is
recognized as "serial port device." I have used all the
winxp drivers available for each modem but no luck. I
was told by a tech guy Win Modems should not be
installed. Any suggestion would be appreciated.
 
G

Guest

Hi,

There are many reasons for system hanging.
Can you see any warning messages in the event log?
Pls post abck with details.

Peter


----- (e-mail address removed) wrote: -----

I successfully upgraded my 400mhz IBM computer from W2k
to WinXp. However, my system no longer recognized my
modemd. I have 2 ISA and 2 PCI internal modems, but I am
getting no where. Only one of the PCI modems receives a
message of "new hardware added" when installed. It is
recognized as "serial port device." I have used all the
winxp drivers available for each modem but no luck. I
was told by a tech guy Win Modems should not be
installed. Any suggestion would be appreciated.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

I NEED HELP, ISDN Modem Incompatability with Win XP SP2 5
Modem does not respond to commands 2
Dial up modem recommendations 21
Modem Problem after win xp upgrade 1
req help: rockwell pci modem 4
how do i make enable my modem for win xP 1
USB Serial Adapters with external V92 modems 3
WinXP FAX Console - FAX Modem Question 2

Top