:
(SNIP)
(And later added...)
JCIrish said:
Anna
Thanks again for you help. I will certainly check out the Acronis program.
I've never considered backing up the entire system, but now that I have
the
large capacity EHD I should probably do it. Since I'm not familiar with
the
Acronis program I would like to see your step-by-step instructions.
Again my thanks (and to others who were helpful as well.
JCIrish
JCIrish:
Here they are...
(I've edited my original submittal somewhat to specifically orient these
instructions (as it relates to the disk-to- disk cloning process) where the
user will be using a USB external hard drive, (as in your case), as the
recipient of the clone. The process would be slightly different should the
user undertake the disk-to-disk cloning process using an internal HDD as the
recipient of the clone.)
Please don't be intimidated by the length of these instructions. I've tried
to be very detailed and lead a new user through the process with a
step-by-step approach. Believe me, whether you use the direct disk-cloning
process or the disk imaging process you'll find either process relatively
simple & straightforward to undertake.
Using the Acronis True Image program there are two different approaches one
can take to back up the entire contents of one's day-to-day working HDD,
i.e., the operating system, all programs & applications, and user-created
data - in short, *everything* that's on one's HDD...
1. Direct disk-to-disk cloning, or
2. Creating disk images
By using either of these strategies the user can restore his or her system
should their HDD become inoperable because of mechanical/electronic failure
of the disk or corruption of the system resulting in a dysfunctional
operating system.
In undertaking either of these two backup & recovery processes you're
dealing with two hard drives - the so-called source & destination disks -
the source disk being the HDD you're backing up and the destination disk
being the HDD that will be the recipient of the cloned contents of the
source disk or the recipient of the disk image you will be creating.
When using either process it's usually best for most users to use an
external HDD as the destination drive, i.e., the recipient of the cloned
contents of the source disk or the recipient of the created disk image. This
can be either a USB or Firewire or SATA external HDD. While another internal
HDD can also serve as the destination disk there's an additional element of
safety by using an external HDD since that drive will be ordinarily
disconnected from the system except during the disk cloning or recovery
process.
The following are step-by-step instructions for using the Acronis True Image
9 program to clone the contents of one HDD to an external HDD. (The steps
are essentially the same using the newer ATI 10 version):
1. With both hard drives (source & destination disks) connected, boot up.
Ensure that no other storage devices, e.g., flash drives, ZIP drives, etc.,
are connected. It's also probably a good idea to shut down any programs you
may have working in the background - including any anti-virus anti-spyware
programs - before undertaking this disk-to-disk cloning operation.
2. Access the Acronis True Image 9 program and under "Pick a Task", click
on "Clone Disk". (In the ATI 10 version click on "Manage Hard Disks" in the
"Pick a Tool" area and on the next screen click on "Clone Disk").
3. On the next "Welcome to the Disk Clone Wizard!" window, click Next.
4. On the next "Clone Mode" window select the Automatic option (it should
be the default option selected) and click Next.
5. On the next "Source Hard Disk" window, ensure that the correct source
HDD (the disk you're cloning from) has been selected (click to highlight).
Click Next.
6. On the next "Destination Hard Disk" window, ensure that the correct
destination HD (the disk you're cloning to) has been selected (again, click
to highlight). Click Next.
7. On the next window, select the option "Delete partitions on the
destination hard disk". Understand that all data presently on the disk that
will be the recipient of the clone will be deleted prior to the disk cloning
operation. Click Next.
8. The next window will reflect the source and destination disks. Again,
confirm that the correct drives have been selected. Click Next.
9. On the next window click on the Proceed button. A message box will
display indicating that a reboot will be required to undertake the disk
cloning operation. Click Reboot.
10. The cloning operation will proceed during the reboot. With modern
components and a medium to high-powered processor, data transfer rate will
be somewhere in the range of about 450 MB/min to 800 GB/min hen cloning to a
USB external HDD.
11. When the cloning operation has been completed, a message will appear
indicating the disk cloning process has been successful and instructs you to
shut down the computer by pressing any key. Do so and disconnect your USB
external HDD.
12. Note that the cloned contents now residing on the USB external HDD take
on the file system of the source drive. For example, if prior to the
disk-cloning operation your USB external HDD had been FAT32-formatted and
your XP OS was NTFS-formatted, the cloned contents will be NTFS-formatted.
There is no need to format the USB external HDD prior to the disk-cloning
operation.
13. Restoration of the system can be achieved by cloning the contents of the
data residing on the external HDD to an internal HDD through the normal
disk-cloning process as described above.
Disk imaging:
The following are step-by-step instructions for using the Acronis True Image
9 Program to create disk images for backup purposes and using those disk
images for recovery of the system. (The steps are essentially the same using
the newer ATI 10 version):
Note: The recipient of the disk image, presumably a USB external HDD or an
internal HD, must be a formatted drive (unlike the case in a disk-to-disk
cloning operation where an unformatted or "virgin" HD can be used as the
destination disk.
Before undertaking this disk imaging process it's probably best to close all
programs running in the background including your anti-virus and other
anti-malware programs.
1. With both your source and destination hard drives connected, access the
Acronis program and click "Backup" on main menu.
2. The "Create Backup Wizard" screen opens. Click Next.
3. "Select Backup Type" screen opens with two options:
a. The entire disk contents or individual partitions.
b. Files and folders.
Select a. and click Next.
(In the ATI 10 version four options will be listed: My Computer, My Data, My
Application Settings, and My E-mail. Select the My Computer option and click
Next.)
4. The "Partitions Selection" screen opens.
Disk 1 and Disk 2 are listed with their drive letter designations. Check
the disk to be backed up - presumably Disk 1 - and click Next.
5. An informational message appears recommending an incremental or
differential backup if original full backup had previously been created.
Since this will be the first backup we will be selecting, just click OK to
close the message box.
6. Next screen is the "Backup Archive Location". In the "File name:" text
box, (in ATI 10 version it's the "Folder:" text box) enter your backup drive
letter and enter a file name for the backup file, e.g., "F:\Backup 11-6".
The Acronis program will automatically append the ".tib" file extension to
the filename. Click Next.
7. "Select Backup Mode" screen opens. Select "Create a new full backup
archive" option and click Next.
8. "Choose Backup Options" screen opens with two options:
a. Use default options
b. Set the options manually
If you select the b. option, you can select various options listed on the
next screen. Two of them are of interest to us:
Compression level - Four options - None, Normal (the default), High,
Maximum.
There's a "Description" area that shows the estimated size of the backup
archive depending upon the option chosen, and the estimated "creation time"
for each option.
(In this example, the actual size of the data to be backed up is 20 GB).
None - 20 GB and estimated creation time of 1 hr 40 min
Normal - 11.96 GB " " " " 50 min (Default)
High - 10.46 GB " " " " 1 hr
Maximum - 10.2 GB " " " " 1 hr
Backup priority - Three options - Low, Normal, or High
Low - "backup processed more slowly, but it will not influence other
processes running on computer." (Default)
Normal - "normal speed but backup process will influence other processes
running on computer."
High - "normal speed but backup process will strongly influence other
processes running on computer."
(As an example, I selected Normal (default) compression level and High
backup priority. The backup archive totaled 15.8 GB compressed from 20 GB;
took 16 min 15 sec to create. Creating a disk-to-disk clone would probably
have taken no longer and possibly a bit faster.)
NOTE: You can set the defaults from the Acronis Tools > Options > Default
backup options menu items.
9. "Archive comments" screen opens allowing you to add comments to the
backup archive which you can review during the Recovery process. Click Next.
10. The next screen summarizes the backup operation to be performed. Review
the information for correctness and click the Proceed button.
11. The next screen will display status bars reflecting the progress of the
backup operation. After the backup operation finishes, an informational
message will appear indicting the operation was successfully completed.
Incremental Backups
1. After the initial backup archive has been created you can create
incremental backups reflecting any data changes since the previous backup
operation. This incremental backup process proceeds considerably faster than
the initial backup operation. This, of course, is a major advantage of
creating disk images rather than undertaking the disk-to-disk cloning
process. Then too, since these created disk images are compressed files they
are reasonable in size. And because the incremental disk images can usually
be created very quickly (as compared with the direct disk-to-disk cloning
process), there's an incentive for the user to keep his/her system
up-to-date backup-wise.
Note that you must create the incremental backup file on the same HDD where
you created the original backup archive and any subsequent incremental
backup files.
2. Access the Acronis program as detailed above and move through the
screens. When you arrive at the "Backup Archive Location" screen, click on
the original backup archive file, or if one or more incremental backup files
were previously created, click on the last incremental backup file and
verify that the correct drive letter and file name are shown in the "File
name:" text box. After clicking Next, the program will automatically create
a file name for the incremental backup archive file, using the original file
name and appending a consecutive number - starting at 2 - at the end of the
file name. For example, say you named the original backup archive file
"Backup 11-6". The first incremental backup file will be automatically named
"Backup 11-62" and the next incremental file "Backup 11-63", etc.
3. On the following "Select Backup Mode" screen, select the "Create
incremental backup" option, click Next, and proceed through the screens as
you did in creating the initial backup archive.
Recovery Process (Disk images)
We'll assume the recovery will be to either a non-defective HDD that has
become unbootable for one reason or another, or to a new HDD.
The recovery process utilizes the Acronis "bootable rescue media" (CD) that
you created when you originally installed the Acronis program. If you didn't
create that bootable CD at that time, you can create it now from the Acronis
program by clicking on the "Create Bootable Rescue Media" icon on the
opening Acronis screen and simply going through the screens to create the
bootable CD.
Note: If the recovery will be made to a HDD that is still bootable and you're
able to access the Acronis program on that drive, then you can undertake the
recovery process without the need for using the "bootable rescue" CD.
1. With both the drive containing the backup disk images and the drive you
want to restore connected and with the bootable rescue CD inserted, boot up.
2. At the opening screen, click on "Acronis True Image Home (Full Version)".
3. The program will open after some moments. On the "Pick a Task" screen
that opens, click on "Recovery".
4. The "Welcome to the Restore Data Wizard!" screen opens. Click on Next.
5. The "Archive Selection" screen opens. Navigate to the drive containing
the backup archive file(s) and select the last incremental backup file or
the original full backup file if no incremental backup files were
subsequently created. Ensure that the correct drive letter and filename are
entered in the "File name:" text box. Click Next.
6. In the Acronis version 9 program, the "Archive Date Selection" screen
opens. Select (highlight) the last incremental backup file from the listing
and click Next. This screen does not appear in version 10.
7. The "Restoration Type Selection" screen opens. Select the option,
"Restore disks or partitions" and click Next.
8. The "Partition or Disk to Restore" will open. Click on "Disk 1" and click
Next.
9. After some moments the "Restored Hard Disk Drive Location" screen opens.
Select (highlight) the HDD to be restored and click Next.
10. On the next screen select the "Yes" option to delete all current
partitions on the destination HDD. Click Next.
11. On the next screen select the "No" option and click Next.
12. On the next screen you have the option to validate the backup archive
before restoration. Click Next.
13. The final screen before the restoration operation begins will open.
Confirm that the information as shown is correct. Click Proceed.
14. Click OK when following completion of the recovery operation a message
appears indicating a successful recovery operation.
15. Remove the Acronis bootable rescue CD and close the Acronis program. The
system will reboot. A Windows "Found New Hardware" message followed by the
"System Settings Change" message box may appear on the Desktop. If so, click
Yes for a reboot.
Note: While the Acronis program is not designed to clone individual
partitions - it can clone only the entire contents of one HDD to another
HDD - you can backup & recover individual partitions through the disk
imaging process as described above.
I trust you will find these instructions helpful.
Anna
