upgrading hardware within windows xp pro

G

Guest

i currently have windows xp pro installed that i received from a microsoft
action pack subscription cd.the hardware is a p2-400 mhz/750mb sdram
installed. i want to upgrade the motherboard and processor will this effect
my xp pro install will i have to reinstall?
 
C

Carey Frisch [MVP]

Changing a Motherboard or Moving a Hard Drive with XP Installed
http://www.michaelstevenstech.com/moving_xp.html

How to Perform a Windows XP Repair Install
http://www.michaelstevenstech.com/XPrepairinstall.htm

[Courtesy of MS-MVP Michael Stevens]

--
Carey Frisch
Microsoft MVP
Windows - Shell/User
Microsoft Community Newsgroups
news://msnews.microsoft.com/

-------------------------------------------------------------------------------------------

:

| i currently have windows xp pro installed that i received from a microsoft
| action pack subscription cd.the hardware is a p2-400 mhz/750mb sdram
| installed. i want to upgrade the motherboard and processor will this effect
| my xp pro install will i have to reinstall?
 
B

Bruce Chambers

mtchll said:
i currently have windows xp pro installed that i received from a microsoft
action pack subscription cd.the hardware is a p2-400 mhz/750mb sdram
installed. i want to upgrade the motherboard and processor will this effect
my xp pro install will i have to reinstall?



Normally, and assuming a retail license (many factory-installed OEM
installations are BIOS-locked to a specific chipset and therefore not
transferable to a new motherboard - check yours before starting), unless
the new motherboard is virtually identical (same chipset, same IDE
controllers, same BIOS version, etc.) to the one on which the WinXP
installation was originally performed, you'll need to perform a repair
(a.k.a. in-place upgrade) installation, at the very least:

How to Perform an In-Place Upgrade of Windows XP
http://support.microsoft.com/directory/article.asp?ID=KB;EN-US;Q315341

The "why" is quite simple, really, and has nothing to do with
licensing issues, per se; it's a purely technical matter, at this point.
You've pulled the proverbial hardware rug out from under the OS. (If
you don't like -- or get -- the rug analogy, think of it as picking up a
Cape Cod style home and then setting it down onto a Ranch style
foundation. It just isn't going to fit.) WinXP, like Win2K before it,
is not nearly as "promiscuous" as Win9x when it comes to accepting any
old hardware configuration you throw at it. On installation it
"tailors" itself to the specific hardware found. This is one of the
reasons that the entire WinNT/2K/XP OS family is so much more stable
than the Win9x group.

As always when undertaking such a significant change, back up any
important data before starting.

This will also probably require re-activation, unless you have a
Volume Licensed version of WinXP Pro installed. If it's been more than
120 days since you last activated that specific Product Key, you'll most
likely be able to activate via the Internet without problem. If it's
been less, you might have to make a 5 minute phone call.


--

Bruce Chambers

Help us help you:



You can have peace. Or you can have freedom. Don't ever count on having
both at once. - RAH
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top