This problem made from CDROM error or not?

[Guest]

- A problem has been detected and windows has been shut down to prevent
damage to your computer
- KERNEL_DATA_ERROR
- If this is the first time yourve seen this stop error screen, restart your
computer If this screen appears again, follow these step:
- Check to make sure any new hardware or software is properly installed. If
this is a new installation, ask your hardware or software manufacturer for
any windows updates you might need.
- If problems continue, disable or remove any newly installed hardware or
software Disable BIOS memory option such as caching or shadowing. If you need
to use Safe mode to remove or disable components, restart your computer,
press F8 to select Advance startup option, and then select safe mode
- Technical information :
*** STOP : 0X0000007AC0XC03E6608, 0XC000000E, 0XF9982384, 0X0BBCC860
*** atapi.sys Address F9982384 base t F9975000, DateStamp 41107b4d

-Beginning dump off physical memory
physical memory dump complete.
Contact your system administrator or technical support group for further
assistance.

This screen will show everytime after launch internet explorer.... My
computer is sempron 2200 with Asrock k7s41gx ram256/400 windows xp sp2 not
beta version.
Thank you very much

 

[Rick \Nutcase\ Rogers]

Hi Joe,

Is Windows installed on a slave drive? Have you tried reinstalling the
motherboard drivers? It appears to be a problem with the ide controller
driver.

--
Best of Luck,

Rick Rogers, aka "Nutcase" - Microsoft MVP

Associate Expert - WindowsXP Expert Zone

Windows help - www.rickrogers.org

 

[Guest]

My CD-ROM is slave. I will change to IDE 2 master
Thank you