Temps Q

[D]

Win2k pro, A7NX dl rev 2, Barton 2500 2*Sata drives, mirrored, 2*ide hd,
cdrw, corsair512 2700
Not overclocked, std bios settings, sys runs 24/7, Lian Li ally. case,
2*fans, True Pwr psu
I have mobo temp of 45C and cpu 53C at idle, using asus monitor, ie web
browsing
Is this to be expected/within norms?

 

[Gordon Scott]

Win2k pro, A7NX dl rev 2, Barton 2500 2*Sata drives, mirrored, 2*ide hd,
cdrw, corsair512 2700
Not overclocked, std bios settings, sys runs 24/7, Lian Li ally. case,
2*fans, True Pwr psu
I have mobo temp of 45C and cpu 53C at idle, using asus monitor, ie web
browsing
Is this to be expected/within norms?

I think these are high, I have the same board and case 2600+ occlocked
and Im at 40 idle and 50-55 under high load, ambiant temp is >20celcius.

Asus moniter? Probe? what version?

Gordon

 

[dino]

I agree..I have same board..Barton 2500 running at 3000+ speeds..MB sensor
at 20 - CPU at 34 idle..hit mid 40's after gaming..but I also have a Chenmng
case with 5 low speed LED fans and a Tt Volcano 11 at 2500 rpm...room temp
is 22 celsius right now. and this is using MBM and AIDA32

 

[D]

Asus probe 2.19.07
Coolmaster xp 3200+ cpu heatsink/fan
Fan controlled via mobo
Asus FX5200 video - I use office apps, v.few games
Aida32 shows mobo 44c, cpu 52c, diode 59c
cpu fan 2480, chasis 1690, psu 2480

 

[D]

OK, realised filter was partially blocked, now mobo 31c, cpu 44c

 

[dino]

that is not too bad...did you put Arctic Silver 3 or 5 between Cooler and
CPU?...that will drop the temp even a few degrees more

 

[D]

Cannot remember, probably, sys has been up & running for 6mnths