SYSPREP Problem: Multifunction PC Card

[Bertil Munde]

Hi,
I've written a driver for a multifunction (16-Bit) PC-Card.
It requires MF.SYS. The driver has no signature.
Therefore, sysprep.inf has set the

OemPnPDriversPath=Drivers\pccards;....
DriverSigningPolicy=Ignore
UpdateInstalledDrivers=YES

to perform a setup w/o user interaction.

However, only MF.SYS gets installed and does not enumerate
the underlying PC-Card devices until reboot and Admin-Login.
If mini-setup is run with the -pnp switch, the card is
completely enumerated. But - the time needed for the
complete enumeration of all devices is not tolerable
for this project.

I'm stuck here. The Microsoft KB does not address this.
It should work, but it does not. Q813707 does not fix it.

Any help would be highly appreciated.

Thanks

Burt

 

[Rob]

for a question this technical, you're probably better off posting your
question in the microsoft system builder forums here:

http://communities.microsoft.com/ne...newsgroup=microsoft.communities.oem.windowsxp

 

[Bertil Munde]

Thanks,
I'll try it there.

Burt

for a question this technical, you're probably better off posting your
question in the microsoft system builder forums here:

http://communities.microsoft.com/ne...newsgroup=microsoft.communities.oem.windowsxp