Strange printing problem in one application only

[Cyborg-haf]

I reformatted my C: partition and reinstalled my WinXP Home and all my
apps this past weekend. Now I have an unusual problem with my Brother
HL-1240 laser-printer in my Fuerio 1.66 (registered) music cd/r burning
program. The program included the capabiltiy to print generic labels and
track-listing trays. Now when I attempt to print a front and tray label
with the laser, the text prints upside down though the letters are still in
order left to right. I also have an HP 990CSE inkjet and the labels print
normally with that printer. The laser-printer prints normally in all my
other apps I tried it in. I use the Windows 2000 full feature drive with
the XP patch installed ( Brother has never come out with a full featured
600dpi driver for WindowsXP, and their XP driver is only 300dpi and doesn't
include the in printer 2-sided printing printing that I use for all my own
document printing ). I have looked all through the printer preferences and
properties and found nothing there that seemed like it would apply, and
Fuerio has no internal settings for printers and just uses Windows printer
settings as used by all other programs. I don't know anything about
WindowsXP's print spooler to know if there is something there that cause
this. I looked through my registry in regedit and found nothing obvious
under the listings and keys in the Fuerio categories either. If anyone can
give me a clue as how to solve this problem, it would be greatly
appreciated. The software was working normally before the reformat and
reinstall.
Herb

 

[Bernie]

I reformatted my C: partition and reinstalled my WinXP Home and all my
apps this past weekend. Now I have an unusual problem with my Brother
HL-1240 laser-printer in my Fuerio 1.66 (registered) music cd/r burning
program. The program included the capabiltiy to print generic labels and
track-listing trays. Now when I attempt to print a front and tray label
with the laser, the text prints upside down though the letters are still in
order left to right. I also have an HP 990CSE inkjet and the labels print
normally with that printer. The laser-printer prints normally in all my
other apps I tried it in. I use the Windows 2000 full feature drive with
the XP patch installed ( Brother has never come out with a full featured
600dpi driver for WindowsXP, and their XP driver is only 300dpi and doesn't
include the in printer 2-sided printing printing that I use for all my own
document printing ). I have looked all through the printer preferences and
properties and found nothing there that seemed like it would apply, and
Fuerio has no internal settings for printers and just uses Windows printer
settings as used by all other programs. I don't know anything about
WindowsXP's print spooler to know if there is something there that cause
this. I looked through my registry in regedit and found nothing obvious
under the listings and keys in the Fuerio categories either. If anyone can
give me a clue as how to solve this problem, it would be greatly
appreciated. The software was working normally before the reformat and
reinstall.
Herb

Feurio does have soem printer settings that you should check. In the
Cover Editor, got to Options, then Setup Format. Check the various
settings. Be sure to read the Note within the Label tab, since it warns
about strange results with some settings on some printer drivers.

Hope that helps.

Bernie