Ronamatroid said:
Hello World.
Can you help me?
I have recently set up a wireless router, and the computer which is hard
wired into the router won't set up a home network. I try and activate the
"set up a home network" wizard, and there is nothing. Nowt. It seems that the
shortcuts for this process are not pointing to anything.
How can i overcome this???
The computer came with XP already loaded, so I haven't got the XP disc.
HELP!!!!
I think you're trying to use the wrong setup wizard. In any case, here
are general instructions for setting up a home network:
Run the Network Setup Wizard on all computers, making sure to enable
File & Printer Sharing, and reboot. The only "gotcha" is that this will
turn on the XPSP2 Windows Firewall. If you aren't running a third-party
firewall or have an antivirus with "Internet Worm Protection" (like
Norton 2005/06) which acts as a firewall, then you're fine. If you have
third-party firewall software, configure it to allow the Local Area
Network traffic as trusted. I usually do this with my firewalls with an
IP range. Ex. would be 192.168.1.0-192.168.1.254. Obviously you would
substitute your correct subnet.
If one or more of the computers is XP Pro or Media Center:
a. If you need Pro's ability to set fine-grained permissions, turn off
Simple File Sharing (Folder Options>View tab) and create identical user
accounts/passwords on all computers.
b. If you don't care about using Pro's advanced features, leave the
Simple File Sharing enabled.
Simple File Sharing means that Guest (network) is enabled. This means
that anyone without a user account on the target system can use its
resources. This is a security hole but only you can decide if it matters
in your situation.
Then create shares as desired. XP Home does not permit sharing of users'
home directories (My Documents) or Program Files, but you can share
folders inside those directories. A better choice is to simply use the
Shared Documents folder.
If that doesn't work for you, here is an excellent network
troubleshooter by MVP Hans-Georg Michna. Take the time to go through it
and it will usually pinpoint the problem area(s) -
http://winhlp.com/wxnet.htm
Malke
