RD Quit

G

Guest

I have been using RD for months, connecting using Remote Desktop Connection.
Suddenly I get msg "the client could not connect...." I am running XPpro
SP1 on both machines. Host is on a network using a linksys router. I do
have a dynamic ip, but use a proxy name thru dyndns (but have checked current
ip and it doesn't work either). I do not use NIS, just Norton AV. I can
connect using Remote Desktop Web Connection (entering
http://192.168.1.101:nnnnn/tsweb/) but, not totally understanding everything,
think I get in because I am within reach of my wireless home network. To my
knowledge, the only thing that has changed was my download of Firefox browser
on the Host. Even though it was not my current browser, I uninstalled it and
reverted to a previous restore point.
 
S

Sooner Al

So you can connect over your local LAN from another PC on the LAN by both IP and name? If so...

What Linksys router?
Have you tried a simple power reset of the router?
Any changes made in the routers port forwarding that you don't know about?

--
Al Jarvi (MS-MVP Windows Networking)

Please post *ALL* questions and replies to the news group for the mutual benefit of all of us...
The MS-MVP Program - http://mvp.support.microsoft.com
This posting is provided "AS IS" with no warranties, and confers no rights...
 
S

Sooner Al

I forgot to add... Run this telnet test to see if you can pinpoint the problem

http://support.microsoft.com/default.aspx?scid=kb;en-us;Q187628

Also, if your trying to connect from a work location to your home its always possible your employer
has started blocking TCP Port 3389 outbound. You need to check with your work/office network
administrators about that issue... One way to test that is to try Remote Desktop from a friends
house. If you can connect then that pretty much points to work blocking the port outbound...

--
Al Jarvi (MS-MVP Windows Networking)

Please post *ALL* questions and replies to the news group for the mutual benefit of all of us...
The MS-MVP Program - http://mvp.support.microsoft.com
This posting is provided "AS IS" with no warranties, and confers no rights...
 
G

Guest

I tried the telnet test and it worked (using the port # (my birthday) that I
port-forwarded long ago for this purpose). Also, I am not at a work location
(I am at home trying to get it to work, so a change at work is NA.
 
S

Sooner Al

Ok...so you are trying to connect to a work PC from home through a Linksys router and using the web
based method, is that correct?

Since the telnet test works, from your home PC to the work PC, then does the regular Remote Desktop
client work, ie. don't use the web based method, from home?

--
Al Jarvi (MS-MVP Windows Networking)

Please post *ALL* questions and replies to the news group for the mutual benefit of all of us...
The MS-MVP Program - http://mvp.support.microsoft.com
This posting is provided "AS IS" with no warranties, and confers no rights...
 
G

Guest

Not exactly--I am on a wireless laptop at home trying to connect to my
desktop downstairs. The regular Remote Desktop
(Start/Programs/accessories/communications/Remote Desktop Connection) is what
used to work but has stopped. I need to get it fixed before I leave town
again.
 
S

Sooner Al

If your trying to test from a PC on your local LAN to another PC on the same LAN, you can *NOT* use
the public IP or dyndns alias of the router. Testing on the local LAN only works using the private
LAN IP or the PC name. To test using the public IP or dyndns alias you must be at a remote location.
You could use a dial modem on a laptop for example, connect into your ISP by dialup and then connect
via the broadband Linksys routers public IP or dyndns alias...

--
Al Jarvi (MS-MVP Windows Networking)

Please post *ALL* questions and replies to the news group for the mutual benefit of all of us...
The MS-MVP Program - http://mvp.support.microsoft.com
This posting is provided "AS IS" with no warranties, and confers no rights...
 
G

Guest

ok--I connected via dialup and still cannot get in. However, I HAVE been
connecting via the dyndns alias when I was not at a remote location--i.e.,
sitting in the same seat under all of the same conditions, clicking the same
buttons. That is what makes this so strange. Tuesday morning it worked,
Tuesday afternoon it didn't.
 
R

Robin Walker

Sooner Al said:
If your trying to test from a PC on your local LAN to another PC on the
same LAN, you can *NOT* use the public IP or dyndns alias of the router.
Testing on the local LAN only works using the private LAN IP or the PC
name. To test using the public IP or dyndns alias you must be at a remote
location.

Not necessarily: some of the latest Linksys routers and firmwares now offer
the option of supporting loopback calls to the WAN IP address, as if they
were from outside. It will depend on the model of router and its
configuration settings whether this will work in any individual case.
 
S

Sooner Al

I guess we need to know what route she has then... Thanks for the tip...

--
Al Jarvi (MS-MVP Windows Networking)

Please post *ALL* questions and replies to the news group for the mutual benefit of all of us...
The MS-MVP Program - http://mvp.support.microsoft.com
This posting is provided "AS IS" with no warranties, and confers no rights...
 
S

Sooner Al

Try the telnet test while the laptop is connected to the dialup. Check forwarding on the
router...etc...etc...etc...

--
Al Jarvi (MS-MVP Windows Networking)

Please post *ALL* questions and replies to the news group for the mutual benefit of all of us...
The MS-MVP Program - http://mvp.support.microsoft.com
This posting is provided "AS IS" with no warranties, and confers no rights...
 
S

Sooner Al

So...Using the regular Remote Desktop client, ie. not the web based method...

1. Can you connect to the target PC from another PC on your local LAN using the target PCs LAN IP or
its network name?
2. If so, then RD is working Ok.
3. If not, the RD is not setup correctly or a personal firewall is running on the target PC or
something else is going on.

4. If you can connect in step 1 above, then does the telnet test work from a remote location?

--
Al Jarvi (MS-MVP Windows Networking)

Please post *ALL* questions and replies to the news group for the mutual benefit of all of us...
The MS-MVP Program - http://mvp.support.microsoft.com
This posting is provided "AS IS" with no warranties, and confers no rights...
 
G

Guest

Hi again--I have Linksys WRT54GS with firmware version v2.07.1
Remember, it WORKED until Tuesday. I have checked to be sure my port
forwarding hasn't changed.
 
B

Bill Sanderson

Is the private IP address of the XP host machine the same as the address in
the port forwarding table?
 
G

Guest

FANTASTIC!! I have no clue as to why the list of private ip addresses got
reassigned in the middle of the day in my absence, but redirecting the
forwarding port to the proper computer fixed my problem. Thank you so much.
 
S

Sooner Al

Maybe because the PC your trying to reach on the LAN is using a DHCP assigned IP address? If so,
configuring it to use a static IP will prevent this issue in the future...

http://www.portforward.com/networking/static-xp.htm

--
Al Jarvi (MS-MVP Windows Networking)

Please post *ALL* questions and replies to the news group for the mutual benefit of all of us...
The MS-MVP Program - http://mvp.support.microsoft.com
This posting is provided "AS IS" with no warranties, and confers no rights...
 
B

Bill Sanderson

I'm not sure what combination of events causes the DHCP server in the
Linksys to reassign, but it does happen.

As Al mentions--the fix for this is to manually assign the IP address for
this workstation, using an address outside the range given out by the
Linksys, but in the same subnet. This sounds harder than it really is--you
just look at the range set up on the DHCP portion of the Linksys, and choose
a number above that range. Write down all the automatically assigned
bits--you need IP, subnet mask, Default Gateway, and DNS--and just put those
in manually. The most common mistake is forgetting the DNS. DG and DNS are
usually just set to the IP of the Linksys.
 
G

Guest

My problem is much the same as Ellen R's in that we are both using a Linksys
router. Mine is WRT54G (no S). I am trying to dial into my work computer -
remote - not on the same LAN as hers. IT works fine as long as I am plugged
into the router but Remote Desktop doesn;t connect at all once I am wireless.
The VPN tunnel works fine but RDC returns an error message every time. I
have set up the router for VPN using my address (and checking it regularly to
make sure it hasn't changed.)
 
G

Guest

Ellen,

I am having many problems connecting using my linksys router also. When you
initially set up your wireless connection, did you have to go through any
configuring of your router? My connection works fine as long as I'm wired
in, but quits as soon as I try wireless.

Sandy
 
P

Phil

I am writing this letter to ALL Wireless Router manufacturers.
I have a Linksys Wireless Router Model:BEFW11S4. It is 7 years (yes, count
them, all of seven little years) old. I have visited the Linksys website
numerous times trying to set up the WEP/WPA security on that wireless router
(as all responsible wireless router owners should!). I found that there are
no links to any wireless router setting websites that are congruent with the
screen shots from Linksys' own self help technical support site. I have had
to call Linksys several times to resolve this issue only to be placed on hold
for lengthy times (sometimes my call was dropped and I had to start over ....
how sad for such a large company to have such poorly trained phone
receptionists!), then be transferred (see previous comment about the phone
receptionists) to a supposed supervisor, only to finally be transferred to
someone who tells me that the warranty has expired and wants me to pay $40.00
for the technical support to do the right thing that I want and need to do.
First, the device works fine (as evidenced by this e-mail that you have
just received)!
Second, why should I have to pay for doing the right thing?
Third, if I am going to be EXTORTED into buying a new wireless router so
that I can do the right thing and set up an encryption key for a secure
network, what on Gods' Green Earth makes anyone think that I would CHOOSE to
buy another Linksys product when ALL that I have ever received from them is a
functional wireless router (yes, even after seven whole years) and the
crappiest Customer Service/Technical Support I have ever had the displeasure
to encounter!
I shall copy this letter and try to find as many Chat Rooms as possible in
order to spread the word of ALL that I have gone through with the Chain of
Command at the Linksys phone center, well above and beyond what any
reasonable person should expect to go through, and still have NO RELIEF
concerning my singular issue with their product and its capabilities that I
SHOULD be able to enjoy as the owner of said product! What has happend to
"The Customer Is Always Right" Customer Service mantra (I can't say "In
America" because the call was handled in India)? Is the Customer, the ones
that makes the company what it is through the purchase of products, so
worthless to the company that they can just be treated with abject contempt
and scorn? Is the Customer to thus be trampled underfoot? Are we paying to
be so abused? I, for one (yes, one, the beginning of all), shall NOT be
treated in such manner, and CERTAINLY shall NOT PAY to be treated as such!
In this world of expanding technologies, it shall be those with the
GREATEST Customer Appeal that shall continue to be found worthwile in the
publics' eyes (and pocketbooks) and shall grow to meet the demands of a
growing world - ESPECIALLY in the Electronics Department!
It is now my strongest desire that the Linksys Corporation suffers
irreparable damage and goes out of business for their Crappy Customer
Service! I can only hope that I reach enough people around the world to bring
this desire true!
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top