"Publish" error message- unique

Q

queensway555

FP 2000 error message May 24, 2004

MY relevant computer equipment includes the following

Windows 2000 Pro O/S

Front Page 2000

80GB HD

1 Gb memory

EZ Trust Anti virus

Linksys Firewall

I have had FP 2000 for years without an error messages of any consequence. .

Today May 24 2004 : While trying to "Publish" web pages [ from within FP
2000] which I have added or edited ; the following interruption occurs

"An error occurred accessing your FrontPage web files. Authors : if
authoring against a web server, please contact the webmaster for this
server's site. WebMasters - please see the server's system log for more
details."

This error message followed the following exercise:

1] Installed a new 80 GB Hard drive

2] Re- installed Windows 2000 Pro

3] RE-installed FrontPage 2000

4] Opened FP 2000 and from a backup tape, I retrieved my
"latinmass.bravepages.com web from a local location.. So far so good.

5] I cannot "Publish" my web pages from within FP2000 to another local
folder on my local disk as I used to do.

6] I cannot "Publish" my web pages from within FP2000 to my remote web site
[ namely www.latinmass.bravepages.com ] as I used to do without the error
message.

7] However; I can access my remote web site at www.latinmass.bravepages.com
successfully.

I need to "Publish" all changed pages following "editing" the same.

I have searched Microsoft Windows knowledge base articles [ e.g. 260159 ]and
similar knowledge base articles . Their instructive solutions are very
detailed but do not help me .

Am I missing something?

Please help . URGENT.

Gratefully

Dr. Gordon J. Fimio


How does one publish my [ approx. 30MB web ] from the remote web site to my
local computer Please, this also very important.
 
K

Kathleen Anderson [MVP - FP]

Dr. Fimio:

What kind of changes did you make today? Did you add any files to your web
that are 1MB or larger?
 
Q

queensway555

Miss Anderson: I did not add any files [large or small in MB 's] to either
my remote web or its local counterpart. . My first exercise after installing
Windows 2000 , was to execute the "Publish" command to publish from one
local site to another local site on the same "C" local disk and thus
encountered for the first time, the error message described. Thank you. I
appreciate your efforts.



Kathleen Anderson said:
Dr. Fimio:

What kind of changes did you make today? Did you add any files to your web
that are 1MB or larger?

--
~ Kathleen Anderson
Microsoft MVP - FrontPage
Spider Web Woman Designs
http://www.spiderwebwoman.com/resources/



queensway555 said:
FP 2000 error message May 24, 2004

MY relevant computer equipment includes the following

Windows 2000 Pro O/S

Front Page 2000

80GB HD

1 Gb memory

EZ Trust Anti virus

Linksys Firewall

I have had FP 2000 for years without an error messages of any
consequence.
.

Today May 24 2004 : While trying to "Publish" web pages [ from within FP
2000] which I have added or edited ; the following interruption occurs

"An error occurred accessing your FrontPage web files. Authors : if
authoring against a web server, please contact the webmaster for this
server's site. WebMasters - please see the server's system log for more
details."

This error message followed the following exercise:

1] Installed a new 80 GB Hard drive

2] Re- installed Windows 2000 Pro

3] RE-installed FrontPage 2000

4] Opened FP 2000 and from a backup tape, I retrieved my
"latinmass.bravepages.com web from a local location.. So far so good.

5] I cannot "Publish" my web pages from within FP2000 to another local
folder on my local disk as I used to do.

6] I cannot "Publish" my web pages from within FP2000 to my remote web site
[ namely www.latinmass.bravepages.com ] as I used to do without the error
message.

7] However; I can access my remote web site at www.latinmass.bravepages.com
successfully.

I need to "Publish" all changed pages following "editing" the same.

I have searched Microsoft Windows knowledge base articles [ e.g. 260159 ]and
similar knowledge base articles . Their instructive solutions are very
detailed but do not help me .

Am I missing something?

Please help . URGENT.

Gratefully

Dr. Gordon J. Fimio


How does one publish my [ approx. 30MB web ] from the remote web site to my
local computer Please, this also very important.
 
T

Tom Pepper Willett

What happens when you use File | Publish and input the URL, rather than just
publish?
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]
----------------------------------------------------------------------------
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/

=====================================================
queensway555 said:
Miss Anderson: I did not add any files [large or small in MB 's] to either
my remote web or its local counterpart. . My first exercise after installing
Windows 2000 , was to execute the "Publish" command to publish from one
local site to another local site on the same "C" local disk and thus
encountered for the first time, the error message described. Thank you. I
appreciate your efforts.



Kathleen Anderson said:
Dr. Fimio:

What kind of changes did you make today? Did you add any files to your web
that are 1MB or larger?

--
~ Kathleen Anderson
Microsoft MVP - FrontPage
Spider Web Woman Designs
http://www.spiderwebwoman.com/resources/



queensway555 said:
FP 2000 error message May 24, 2004

MY relevant computer equipment includes the following

Windows 2000 Pro O/S

Front Page 2000

80GB HD

1 Gb memory

EZ Trust Anti virus

Linksys Firewall

I have had FP 2000 for years without an error messages of any
consequence.
.

Today May 24 2004 : While trying to "Publish" web pages [ from within FP
2000] which I have added or edited ; the following interruption occurs

"An error occurred accessing your FrontPage web files. Authors : if
authoring against a web server, please contact the webmaster for this
server's site. WebMasters - please see the server's system log for more
details."

This error message followed the following exercise:

1] Installed a new 80 GB Hard drive

2] Re- installed Windows 2000 Pro

3] RE-installed FrontPage 2000

4] Opened FP 2000 and from a backup tape, I retrieved my
"latinmass.bravepages.com web from a local location.. So far so good.

5] I cannot "Publish" my web pages from within FP2000 to another local
folder on my local disk as I used to do.

6] I cannot "Publish" my web pages from within FP2000 to my remote web site
[ namely www.latinmass.bravepages.com ] as I used to do without the error
message.

7] However; I can access my remote web site at www.latinmass.bravepages.com
successfully.

I need to "Publish" all changed pages following "editing" the same.

I have searched Microsoft Windows knowledge base articles [ e.g. 260159 ]and
similar knowledge base articles . Their instructive solutions are very
detailed but do not help me .

Am I missing something?

Please help . URGENT.

Gratefully

Dr. Gordon J. Fimio


How does one publish my [ approx. 30MB web ] from the remote web site
to
my
local computer Please, this also very important.
 
Q

queensway555

Mr. Tom Pepper: An example of the execution which brings down the error
message , is the following::

1] In FP 2000 [ Open Web] [Go To [Web Folders] and select my web , namely
, [latinmass.bravepages.com] [Open]
2] Name and Password is requested. Name = latinmass.bravepages.com the
Password = **********
3] In Microsoft Front Page the remote web displays as an Internet
location ,namely, [ http://latinmass.bravepages.com ]
4] Select [File] [Publish]
5] Where to publish ? is requested. I created and selected a
temporary folder, namely, [C:....\Gordon 3\My documents\wincopy latinmass ]
6] A progress box indicates that downloading from the remote web site is
taking place, successfully.
7] At 75% completion , Updating progress box displays , then the progress
stops and is interrupted by "The Error Message."
8] When I open the [C:....\Gordon 3\My documents\wincopy latinmass ]
into FP 2000 , all has been published except the "Navigation Structure"

Comment : perhaps ,once we correct the source of the error message, the
"Publishing " will proceed to 100%

Thank you . for your kind efforts and trusting that what has been submitted
will clarify some issues for you to act upon.

Dr. Gordon J. Fimio



Tom Pepper Willett said:
What happens when you use File | Publish and input the URL, rather than just
publish?
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]
-------------------------------------------------------------------------- --
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
queensway555 said:
Miss Anderson: I did not add any files [large or small in MB 's] to either
my remote web or its local counterpart. . My first exercise after installing
Windows 2000 , was to execute the "Publish" command to publish from one
local site to another local site on the same "C" local disk and thus
encountered for the first time, the error message described. Thank you. I
appreciate your efforts.



Dr. Fimio:

What kind of changes did you make today? Did you add any files to your web
that are 1MB or larger?

--
~ Kathleen Anderson
Microsoft MVP - FrontPage
Spider Web Woman Designs
http://www.spiderwebwoman.com/resources/



FP 2000 error message May 24, 2004

MY relevant computer equipment includes the following

Windows 2000 Pro O/S

Front Page 2000

80GB HD

1 Gb memory

EZ Trust Anti virus

Linksys Firewall

I have had FP 2000 for years without an error messages of any consequence.
.

Today May 24 2004 : While trying to "Publish" web pages [ from
within
FP
2000] which I have added or edited ; the following interruption occurs

"An error occurred accessing your FrontPage web files. Authors : if
authoring against a web server, please contact the webmaster for this
server's site. WebMasters - please see the server's system log for more
details."

This error message followed the following exercise:

1] Installed a new 80 GB Hard drive

2] Re- installed Windows 2000 Pro

3] RE-installed FrontPage 2000

4] Opened FP 2000 and from a backup tape, I retrieved my
"latinmass.bravepages.com web from a local location.. So far so good.

5] I cannot "Publish" my web pages from within FP2000 to another local
folder on my local disk as I used to do.

6] I cannot "Publish" my web pages from within FP2000 to my remote web
site
[ namely www.latinmass.bravepages.com ] as I used to do without the error
message.

7] However; I can access my remote web site at
www.latinmass.bravepages.com
successfully.

I need to "Publish" all changed pages following "editing" the same.

I have searched Microsoft Windows knowledge base articles [ e.g.
260159 ]and
similar knowledge base articles . Their instructive solutions are very
detailed but do not help me .

Am I missing something?

Please help . URGENT.

Gratefully

Dr. Gordon J. Fimio


How does one publish my [ approx. 30MB web ] from the remote web
site
 
K

Kathleen Anderson [MVP - FP]

Dr. Fimio:
Try publishing to C:....\Gordon 3\My documents\wincopylatinmass (without
the space in the web name).

--
~ Kathleen Anderson
Microsoft MVP - FrontPage
Spider Web Woman Designs
http://www.spiderwebwoman.com/resources/




queensway555 said:
Mr. Tom Pepper: An example of the execution which brings down the
error message , is the following::

1] In FP 2000 [ Open Web] [Go To [Web Folders] and select my web ,
namely , [latinmass.bravepages.com] [Open]
2] Name and Password is requested. Name = latinmass.bravepages.com
the Password = **********
3] In Microsoft Front Page the remote web displays as an Internet
location ,namely, [ http://latinmass.bravepages.com ]
4] Select [File] [Publish]
5] Where to publish ? is requested. I created and selected a
temporary folder, namely, [C:....\Gordon 3\My documents\wincopy
latinmass ] 6] A progress box indicates that downloading from the
remote web site is taking place, successfully.
7] At 75% completion , Updating progress box displays , then the
progress stops and is interrupted by "The Error Message."
8] When I open the [C:....\Gordon 3\My documents\wincopy
latinmass ] into FP 2000 , all has been published except the
"Navigation Structure"

Comment : perhaps ,once we correct the source of the error message,
the "Publishing " will proceed to 100%

Thank you . for your kind efforts and trusting that what has been
submitted will clarify some issues for you to act upon.

Dr. Gordon J. Fimio



Tom Pepper Willett said:
What happens when you use File | Publish and input the URL, rather
than just publish?
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]
------------------------------------------------------------------------- -
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
queensway555 said:
Miss Anderson: I did not add any files [large or small in MB 's] to
either my remote web or its local counterpart. . My first exercise
after installing Windows 2000 , was to execute the "Publish"
command to publish from one local site to another local site on the
same "C" local disk and thus encountered for the first time, the
error message described. Thank you. I appreciate your efforts.



message Dr. Fimio:

What kind of changes did you make today? Did you add any files to
your web that are 1MB or larger?

--
~ Kathleen Anderson
Microsoft MVP - FrontPage
Spider Web Woman Designs
http://www.spiderwebwoman.com/resources/



FP 2000 error message May 24, 2004

MY relevant computer equipment includes the following

Windows 2000 Pro O/S

Front Page 2000

80GB HD

1 Gb memory

EZ Trust Anti virus

Linksys Firewall

I have had FP 2000 for years without an error messages of any
consequence. .

Today May 24 2004 : While trying to "Publish" web pages [ from
within FP 2000] which I have added or edited ; the following
interruption occurs

"An error occurred accessing your FrontPage web files. Authors :
if authoring against a web server, please contact the webmaster
for this server's site. WebMasters - please see the server's
system log for more details."

This error message followed the following exercise:

1] Installed a new 80 GB Hard drive

2] Re- installed Windows 2000 Pro

3] RE-installed FrontPage 2000

4] Opened FP 2000 and from a backup tape, I retrieved my
"latinmass.bravepages.com web from a local location.. So far so
good.

5] I cannot "Publish" my web pages from within FP2000 to another
local folder on my local disk as I used to do.

6] I cannot "Publish" my web pages from within FP2000 to my
remote web site [ namely www.latinmass.bravepages.com ] as I used
to do without the error message.

7] However; I can access my remote web site at
www.latinmass.bravepages.com successfully.

I need to "Publish" all changed pages following "editing" the
same.

I have searched Microsoft Windows knowledge base articles [ e.g.
260159 ]and similar knowledge base articles . Their instructive
solutions are very detailed but do not help me .

Am I missing something?

Please help . URGENT.

Gratefully

Dr. Gordon J. Fimio


How does one publish my [ approx. 30MB web ] from the remote web
site
to
my
local computer Please, this also very important.
 
Q

queensway555

Miss Anderson: following your suggestion , this occurred:

May 26 2004

Tried the "Publish " command again ; from the remote web site to my local
web site with no spaces in the web name [ wincopy32latinmass ] as suggested.

COMMENT :

After 3 or so minutes into the download progression of files and folders ,
the procedure stopped with the following message:

"The server could not complete your request. Contact your Internet Service
Provider or your Web server Administrator to make sure that the FrontPage
Server Extensions are installed. "

[Click "Details" ] "404 not found. The requested URL
/_vti_bin/_vti_aut/author.exe was not found on this server.

Apache/1.3.26 Server at ......fp.Ocatch.com Port 80.

[End of detailed mesage. ] Thank you.

Dr. Gordon J. Fimio






Kathleen Anderson said:
Dr. Fimio:
Try publishing to C:....\Gordon 3\My documents\wincopylatinmass (without
the space in the web name).

--
~ Kathleen Anderson
Microsoft MVP - FrontPage
Spider Web Woman Designs
http://www.spiderwebwoman.com/resources/




queensway555 said:
Mr. Tom Pepper: An example of the execution which brings down the
error message , is the following::

1] In FP 2000 [ Open Web] [Go To [Web Folders] and select my web ,
namely , [latinmass.bravepages.com] [Open]
2] Name and Password is requested. Name = latinmass.bravepages.com
the Password = **********
3] In Microsoft Front Page the remote web displays as an Internet
location ,namely, [ http://latinmass.bravepages.com ]
4] Select [File] [Publish]
5] Where to publish ? is requested. I created and selected a
temporary folder, namely, [C:....\Gordon 3\My documents\wincopy
latinmass ] 6] A progress box indicates that downloading from the
remote web site is taking place, successfully.
7] At 75% completion , Updating progress box displays , then the
progress stops and is interrupted by "The Error Message."
8] When I open the [C:....\Gordon 3\My documents\wincopy
latinmass ] into FP 2000 , all has been published except the
"Navigation Structure"

Comment : perhaps ,once we correct the source of the error message,
the "Publishing " will proceed to 100%

Thank you . for your kind efforts and trusting that what has been
submitted will clarify some issues for you to act upon.

Dr. Gordon J. Fimio



Tom Pepper Willett said:
What happens when you use File | Publish and input the URL, rather
than just publish?
-------------------------------------------------------------------------
-
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Miss Anderson: I did not add any files [large or small in MB 's] to
either my remote web or its local counterpart. . My first exercise
after installing Windows 2000 , was to execute the "Publish"
command to publish from one local site to another local site on the
same "C" local disk and thus encountered for the first time, the
error message described. Thank you. I appreciate your efforts.



message Dr. Fimio:

What kind of changes did you make today? Did you add any files to
your web that are 1MB or larger?

--
~ Kathleen Anderson
Microsoft MVP - FrontPage
Spider Web Woman Designs
http://www.spiderwebwoman.com/resources/



FP 2000 error message May 24, 2004

MY relevant computer equipment includes the following

Windows 2000 Pro O/S

Front Page 2000

80GB HD

1 Gb memory

EZ Trust Anti virus

Linksys Firewall

I have had FP 2000 for years without an error messages of any
consequence. .

Today May 24 2004 : While trying to "Publish" web pages [ from
within FP 2000] which I have added or edited ; the following
interruption occurs

"An error occurred accessing your FrontPage web files. Authors :
if authoring against a web server, please contact the webmaster
for this server's site. WebMasters - please see the server's
system log for more details."

This error message followed the following exercise:

1] Installed a new 80 GB Hard drive

2] Re- installed Windows 2000 Pro

3] RE-installed FrontPage 2000

4] Opened FP 2000 and from a backup tape, I retrieved my
"latinmass.bravepages.com web from a local location.. So far so
good.

5] I cannot "Publish" my web pages from within FP2000 to another
local folder on my local disk as I used to do.

6] I cannot "Publish" my web pages from within FP2000 to my
remote web site [ namely www.latinmass.bravepages.com ] as I used
to do without the error message.

7] However; I can access my remote web site at
www.latinmass.bravepages.com successfully.

I need to "Publish" all changed pages following "editing" the
same.

I have searched Microsoft Windows knowledge base articles [ e.g.
260159 ]and similar knowledge base articles . Their instructive
solutions are very detailed but do not help me .

Am I missing something?

Please help . URGENT.

Gratefully

Dr. Gordon J. Fimio


How does one publish my [ approx. 30MB web ] from the remote web site
to
my
local computer Please, this also very important.
 
T

Tom Pepper Willett

Do you in fact have the FP server extensions installed on your local
machine?
Have you run a check and fix, or health on the extensions?
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]
----------------------------------------------------------------------------
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/

=====================================================
queensway555 said:
Miss Anderson: following your suggestion , this occurred:

May 26 2004

Tried the "Publish " command again ; from the remote web site to my local
web site with no spaces in the web name [ wincopy32latinmass ] as suggested.

COMMENT :

After 3 or so minutes into the download progression of files and folders ,
the procedure stopped with the following message:

"The server could not complete your request. Contact your Internet Service
Provider or your Web server Administrator to make sure that the FrontPage
Server Extensions are installed. "

[Click "Details" ] "404 not found. The requested URL
/_vti_bin/_vti_aut/author.exe was not found on this server.

Apache/1.3.26 Server at ......fp.Ocatch.com Port 80.

[End of detailed mesage. ] Thank you.

Dr. Gordon J. Fimio






Kathleen Anderson said:
Dr. Fimio:
Try publishing to C:....\Gordon 3\My documents\wincopylatinmass (without
the space in the web name).

--
~ Kathleen Anderson
Microsoft MVP - FrontPage
Spider Web Woman Designs
http://www.spiderwebwoman.com/resources/




queensway555 said:
Mr. Tom Pepper: An example of the execution which brings down the
error message , is the following::

1] In FP 2000 [ Open Web] [Go To [Web Folders] and select my web ,
namely , [latinmass.bravepages.com] [Open]
2] Name and Password is requested. Name = latinmass.bravepages.com
the Password = **********
3] In Microsoft Front Page the remote web displays as an Internet
location ,namely, [ http://latinmass.bravepages.com ]
4] Select [File] [Publish]
5] Where to publish ? is requested. I created and selected a
temporary folder, namely, [C:....\Gordon 3\My documents\wincopy
latinmass ] 6] A progress box indicates that downloading from the
remote web site is taking place, successfully.
7] At 75% completion , Updating progress box displays , then the
progress stops and is interrupted by "The Error Message."
8] When I open the [C:....\Gordon 3\My documents\wincopy
latinmass ] into FP 2000 , all has been published except the
"Navigation Structure"

Comment : perhaps ,once we correct the source of the error message,
the "Publishing " will proceed to 100%

Thank you . for your kind efforts and trusting that what has been
submitted will clarify some issues for you to act upon.

Dr. Gordon J. Fimio



What happens when you use File | Publish and input the URL, rather
than just publish?
-------------------------------------------------------------------------
-
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Miss Anderson: I did not add any files [large or small in MB 's] to
either my remote web or its local counterpart. . My first exercise
after installing Windows 2000 , was to execute the "Publish"
command to publish from one local site to another local site on the
same "C" local disk and thus encountered for the first time, the
error message described. Thank you. I appreciate your efforts.



message Dr. Fimio:

What kind of changes did you make today? Did you add any files to
your web that are 1MB or larger?

--
~ Kathleen Anderson
Microsoft MVP - FrontPage
Spider Web Woman Designs
http://www.spiderwebwoman.com/resources/



FP 2000 error message May 24, 2004

MY relevant computer equipment includes the following

Windows 2000 Pro O/S

Front Page 2000

80GB HD

1 Gb memory

EZ Trust Anti virus

Linksys Firewall

I have had FP 2000 for years without an error messages of any
consequence. .

Today May 24 2004 : While trying to "Publish" web pages [ from
within FP 2000] which I have added or edited ; the following
interruption occurs

"An error occurred accessing your FrontPage web files. Authors :
if authoring against a web server, please contact the webmaster
for this server's site. WebMasters - please see the server's
system log for more details."

This error message followed the following exercise:

1] Installed a new 80 GB Hard drive

2] Re- installed Windows 2000 Pro

3] RE-installed FrontPage 2000

4] Opened FP 2000 and from a backup tape, I retrieved my
"latinmass.bravepages.com web from a local location.. So far so
good.

5] I cannot "Publish" my web pages from within FP2000 to another
local folder on my local disk as I used to do.

6] I cannot "Publish" my web pages from within FP2000 to my
remote web site [ namely www.latinmass.bravepages.com ] as I used
to do without the error message.

7] However; I can access my remote web site at
www.latinmass.bravepages.com successfully.

I need to "Publish" all changed pages following "editing" the
same.

I have searched Microsoft Windows knowledge base articles [ e.g.
260159 ]and similar knowledge base articles . Their instructive
solutions are very detailed but do not help me .

Am I missing something?

Please help . URGENT.

Gratefully

Dr. Gordon J. Fimio


How does one publish my [ approx. 30MB web ] from the remote web
site
to
my
local computer Please, this also very important.
 
Q

queensway555

Mr . Pepper:


May 26, 2004 May 26, 2004 12.00 p.m.



1] I entered the FrontPage Server Administrator via : C:\program
files\common files\microsoft shared\web server extensions\version 4.0
\bin\fpsradm.exe and executed the file

2] In the "DOS interface ; and from a long list of options ; I selected
[check and fix] .successfully. I trust that this means that FP extensions
are already installed locally. If there is another means , please advise.

3] RE tried the "Publish" procedure ; remote to local and received the
following message : "Could not find a web server at
Latinmass.bravepages.com"

Thank you one and all

Dr. Gordon J. Fimio [ posted on newsgroup ]


..


Tom Pepper Willett said:
Do you in fact have the FP server extensions installed on your local
machine?
Have you run a check and fix, or health on the extensions?
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]
-------------------------------------------------------------------------- --
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
queensway555 said:
Miss Anderson: following your suggestion , this occurred:

May 26 2004

Tried the "Publish " command again ; from the remote web site to my local
web site with no spaces in the web name [ wincopy32latinmass ] as suggested.

COMMENT :

After 3 or so minutes into the download progression of files and folders ,
the procedure stopped with the following message:

"The server could not complete your request. Contact your Internet Service
Provider or your Web server Administrator to make sure that the FrontPage
Server Extensions are installed. "

[Click "Details" ] "404 not found. The requested URL
/_vti_bin/_vti_aut/author.exe was not found on this server.

Apache/1.3.26 Server at ......fp.Ocatch.com Port 80.

[End of detailed mesage. ] Thank you.

Dr. Gordon J. Fimio






Dr. Fimio:
Try publishing to C:....\Gordon 3\My documents\wincopylatinmass (without
the space in the web name).

--
~ Kathleen Anderson
Microsoft MVP - FrontPage
Spider Web Woman Designs
http://www.spiderwebwoman.com/resources/




Mr. Tom Pepper: An example of the execution which brings down the
error message , is the following::

1] In FP 2000 [ Open Web] [Go To [Web Folders] and select my web ,
namely , [latinmass.bravepages.com] [Open]
2] Name and Password is requested. Name = latinmass.bravepages.com
the Password = **********
3] In Microsoft Front Page the remote web displays as an Internet
location ,namely, [ http://latinmass.bravepages.com ]
4] Select [File] [Publish]
5] Where to publish ? is requested. I created and selected a
temporary folder, namely, [C:....\Gordon 3\My documents\wincopy
latinmass ] 6] A progress box indicates that downloading from the
remote web site is taking place, successfully.
7] At 75% completion , Updating progress box displays , then the
progress stops and is interrupted by "The Error Message."
8] When I open the [C:....\Gordon 3\My documents\wincopy
latinmass ] into FP 2000 , all has been published except the
"Navigation Structure"

Comment : perhaps ,once we correct the source of the error message,
the "Publishing " will proceed to 100%

Thank you . for your kind efforts and trusting that what has been
submitted will clarify some issues for you to act upon.

Dr. Gordon J. Fimio



What happens when you use File | Publish and input the URL, rather
than just publish?
-------------------------------------------------------------------------
-
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Miss Anderson: I did not add any files [large or small in MB 's] to
either my remote web or its local counterpart. . My first exercise
after installing Windows 2000 , was to execute the "Publish"
command to publish from one local site to another local site on the
same "C" local disk and thus encountered for the first time, the
error message described. Thank you. I appreciate your efforts.



message Dr. Fimio:

What kind of changes did you make today? Did you add any files to
your web that are 1MB or larger?

--
~ Kathleen Anderson
Microsoft MVP - FrontPage
Spider Web Woman Designs
http://www.spiderwebwoman.com/resources/



FP 2000 error message May 24, 2004

MY relevant computer equipment includes the following

Windows 2000 Pro O/S

Front Page 2000

80GB HD

1 Gb memory

EZ Trust Anti virus

Linksys Firewall

I have had FP 2000 for years without an error messages of any
consequence. .

Today May 24 2004 : While trying to "Publish" web pages [ from
within FP 2000] which I have added or edited ; the following
interruption occurs

"An error occurred accessing your FrontPage web files. Authors :
if authoring against a web server, please contact the webmaster
for this server's site. WebMasters - please see the server's
system log for more details."

This error message followed the following exercise:

1] Installed a new 80 GB Hard drive

2] Re- installed Windows 2000 Pro

3] RE-installed FrontPage 2000

4] Opened FP 2000 and from a backup tape, I retrieved my
"latinmass.bravepages.com web from a local location.. So far so
good.

5] I cannot "Publish" my web pages from within FP2000 to another
local folder on my local disk as I used to do.

6] I cannot "Publish" my web pages from within FP2000 to my
remote web site [ namely www.latinmass.bravepages.com ] as I used
to do without the error message.

7] However; I can access my remote web site at
www.latinmass.bravepages.com successfully.

I need to "Publish" all changed pages following "editing" the
same.

I have searched Microsoft Windows knowledge base articles [ e.g.
260159 ]and similar knowledge base articles . Their instructive
solutions are very detailed but do not help me .

Am I missing something?

Please help . URGENT.

Gratefully

Dr. Gordon J. Fimio


How does one publish my [ approx. 30MB web ] from the remote web
site
to
my
local computer Please, this also very important.
 
T

Tom Pepper Willett

What is the exact address you are trying to publish to?
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]
----------------------------------------------------------------------------
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/

=====================================================
queensway555 said:
Mr . Pepper:


May 26, 2004 May 26, 2004 12.00 p.m.



1] I entered the FrontPage Server Administrator via : C:\program
files\common files\microsoft shared\web server extensions\version 4.0
\bin\fpsradm.exe and executed the file

2] In the "DOS interface ; and from a long list of options ; I selected
[check and fix] .successfully. I trust that this means that FP extensions
are already installed locally. If there is another means , please advise.

3] RE tried the "Publish" procedure ; remote to local and received the
following message : "Could not find a web server at
Latinmass.bravepages.com"

Thank you one and all

Dr. Gordon J. Fimio [ posted on newsgroup ]


.


Tom Pepper Willett said:
Do you in fact have the FP server extensions installed on your local
machine?
Have you run a check and fix, or health on the extensions?
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]
--------------------------------------------------------------------------
--
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
queensway555 said:
Miss Anderson: following your suggestion , this occurred:

May 26 2004

Tried the "Publish " command again ; from the remote web site to my local
web site with no spaces in the web name [ wincopy32latinmass ] as suggested.

COMMENT :

After 3 or so minutes into the download progression of files and
folders
,
the procedure stopped with the following message:

"The server could not complete your request. Contact your Internet Service
Provider or your Web server Administrator to make sure that the FrontPage
Server Extensions are installed. "

[Click "Details" ] "404 not found. The requested URL
/_vti_bin/_vti_aut/author.exe was not found on this server.

Apache/1.3.26 Server at ......fp.Ocatch.com Port 80.

[End of detailed mesage. ] Thank you.

Dr. Gordon J. Fimio






Dr. Fimio:
Try publishing to C:....\Gordon 3\My documents\wincopylatinmass
(without
the space in the web name).

--
~ Kathleen Anderson
Microsoft MVP - FrontPage
Spider Web Woman Designs
http://www.spiderwebwoman.com/resources/




Mr. Tom Pepper: An example of the execution which brings down the
error message , is the following::

1] In FP 2000 [ Open Web] [Go To [Web Folders] and select my
web
,
namely , [latinmass.bravepages.com] [Open]
2] Name and Password is requested. Name = latinmass.bravepages.com
the Password = **********
3] In Microsoft Front Page the remote web displays as an Internet
location ,namely, [ http://latinmass.bravepages.com ]
4] Select [File] [Publish]
5] Where to publish ? is requested. I created and selected a
temporary folder, namely, [C:....\Gordon 3\My documents\wincopy
latinmass ] 6] A progress box indicates that downloading from the
remote web site is taking place, successfully.
7] At 75% completion , Updating progress box displays , then the
progress stops and is interrupted by "The Error Message."
8] When I open the [C:....\Gordon 3\My documents\wincopy
latinmass ] into FP 2000 , all has been published except the
"Navigation Structure"

Comment : perhaps ,once we correct the source of the error message,
the "Publishing " will proceed to 100%

Thank you . for your kind efforts and trusting that what has been
submitted will clarify some issues for you to act upon.

Dr. Gordon J. Fimio



What happens when you use File | Publish and input the URL, rather
than just publish?
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]
-------------------------------------------------------------------------
-
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Miss Anderson: I did not add any files [large or small in MB 's] to
either my remote web or its local counterpart. . My first exercise
after installing Windows 2000 , was to execute the "Publish"
command to publish from one local site to another local site on the
same "C" local disk and thus encountered for the first time, the
error message described. Thank you. I appreciate your efforts.



message Dr. Fimio:

What kind of changes did you make today? Did you add any files to
your web that are 1MB or larger?

--
~ Kathleen Anderson
Microsoft MVP - FrontPage
Spider Web Woman Designs
http://www.spiderwebwoman.com/resources/



FP 2000 error message May 24, 2004

MY relevant computer equipment includes the following

Windows 2000 Pro O/S

Front Page 2000

80GB HD

1 Gb memory

EZ Trust Anti virus

Linksys Firewall

I have had FP 2000 for years without an error messages of any
consequence. .

Today May 24 2004 : While trying to "Publish" web pages [ from
within FP 2000] which I have added or edited ; the following
interruption occurs

"An error occurred accessing your FrontPage web files. Authors :
if authoring against a web server, please contact the webmaster
for this server's site. WebMasters - please see the server's
system log for more details."

This error message followed the following exercise:

1] Installed a new 80 GB Hard drive

2] Re- installed Windows 2000 Pro

3] RE-installed FrontPage 2000

4] Opened FP 2000 and from a backup tape, I retrieved my
"latinmass.bravepages.com web from a local location.. So far so
good.

5] I cannot "Publish" my web pages from within FP2000 to another
local folder on my local disk as I used to do.

6] I cannot "Publish" my web pages from within FP2000 to my
remote web site [ namely www.latinmass.bravepages.com ] as I used
to do without the error message.

7] However; I can access my remote web site at
www.latinmass.bravepages.com successfully.

I need to "Publish" all changed pages following "editing" the
same.

I have searched Microsoft Windows knowledge base articles [ e.g.
260159 ]and similar knowledge base articles . Their instructive
solutions are very detailed but do not help me .

Am I missing something?

Please help . URGENT.

Gratefully

Dr. Gordon J. Fimio


How does one publish my [ approx. 30MB web ] from the remote web
site
to
my
local computer Please, this also very important.
 
T

Thomas A. Rowe

If you are trying to publish from the remote server back to your local machine, the correct URL
would be:

http://localhost/websitename (no period or .com, etc.)

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
WEBMASTER Resources(tm)

FrontPage Resources, WebCircle, MS KB Quick Links, etc.
==============================================


queensway555 said:
Mr . Pepper:


May 26, 2004 May 26, 2004 12.00 p.m.



1] I entered the FrontPage Server Administrator via : C:\program
files\common files\microsoft shared\web server extensions\version 4.0
\bin\fpsradm.exe and executed the file

2] In the "DOS interface ; and from a long list of options ; I selected
[check and fix] .successfully. I trust that this means that FP extensions
are already installed locally. If there is another means , please advise.

3] RE tried the "Publish" procedure ; remote to local and received the
following message : "Could not find a web server at
Latinmass.bravepages.com"

Thank you one and all

Dr. Gordon J. Fimio [ posted on newsgroup ]


.


Tom Pepper Willett said:
Do you in fact have the FP server extensions installed on your local
machine?
Have you run a check and fix, or health on the extensions?
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]
-------------------------------------------------------------------------- --
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
queensway555 said:
Miss Anderson: following your suggestion , this occurred:

May 26 2004

Tried the "Publish " command again ; from the remote web site to my local
web site with no spaces in the web name [ wincopy32latinmass ] as suggested.

COMMENT :

After 3 or so minutes into the download progression of files and folders ,
the procedure stopped with the following message:

"The server could not complete your request. Contact your Internet Service
Provider or your Web server Administrator to make sure that the FrontPage
Server Extensions are installed. "

[Click "Details" ] "404 not found. The requested URL
/_vti_bin/_vti_aut/author.exe was not found on this server.

Apache/1.3.26 Server at ......fp.Ocatch.com Port 80.

[End of detailed mesage. ] Thank you.

Dr. Gordon J. Fimio






Dr. Fimio:
Try publishing to C:....\Gordon 3\My documents\wincopylatinmass
(without
the space in the web name).

--
~ Kathleen Anderson
Microsoft MVP - FrontPage
Spider Web Woman Designs
http://www.spiderwebwoman.com/resources/




Mr. Tom Pepper: An example of the execution which brings down the
error message , is the following::

1] In FP 2000 [ Open Web] [Go To [Web Folders] and select my web ,
namely , [latinmass.bravepages.com] [Open]
2] Name and Password is requested. Name = latinmass.bravepages.com
the Password = **********
3] In Microsoft Front Page the remote web displays as an Internet
location ,namely, [ http://latinmass.bravepages.com ]
4] Select [File] [Publish]
5] Where to publish ? is requested. I created and selected a
temporary folder, namely, [C:....\Gordon 3\My documents\wincopy
latinmass ] 6] A progress box indicates that downloading from the
remote web site is taking place, successfully.
7] At 75% completion , Updating progress box displays , then the
progress stops and is interrupted by "The Error Message."
8] When I open the [C:....\Gordon 3\My documents\wincopy
latinmass ] into FP 2000 , all has been published except the
"Navigation Structure"

Comment : perhaps ,once we correct the source of the error message,
the "Publishing " will proceed to 100%

Thank you . for your kind efforts and trusting that what has been
submitted will clarify some issues for you to act upon.

Dr. Gordon J. Fimio



What happens when you use File | Publish and input the URL, rather
than just publish?
-------------------------------------------------------------------------
-
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Miss Anderson: I did not add any files [large or small in MB 's] to
either my remote web or its local counterpart. . My first exercise
after installing Windows 2000 , was to execute the "Publish"
command to publish from one local site to another local site on the
same "C" local disk and thus encountered for the first time, the
error message described. Thank you. I appreciate your efforts.



message Dr. Fimio:

What kind of changes did you make today? Did you add any files to
your web that are 1MB or larger?

--
~ Kathleen Anderson
Microsoft MVP - FrontPage
Spider Web Woman Designs
http://www.spiderwebwoman.com/resources/



FP 2000 error message May 24, 2004

MY relevant computer equipment includes the following

Windows 2000 Pro O/S

Front Page 2000

80GB HD

1 Gb memory

EZ Trust Anti virus

Linksys Firewall

I have had FP 2000 for years without an error messages of any
consequence. .

Today May 24 2004 : While trying to "Publish" web pages [ from
within FP 2000] which I have added or edited ; the following
interruption occurs

"An error occurred accessing your FrontPage web files. Authors :
if authoring against a web server, please contact the webmaster
for this server's site. WebMasters - please see the server's
system log for more details."

This error message followed the following exercise:

1] Installed a new 80 GB Hard drive

2] Re- installed Windows 2000 Pro

3] RE-installed FrontPage 2000

4] Opened FP 2000 and from a backup tape, I retrieved my
"latinmass.bravepages.com web from a local location.. So far so
good.

5] I cannot "Publish" my web pages from within FP2000 to another
local folder on my local disk as I used to do.

6] I cannot "Publish" my web pages from within FP2000 to my
remote web site [ namely www.latinmass.bravepages.com ] as I used
to do without the error message.

7] However; I can access my remote web site at
www.latinmass.bravepages.com successfully.

I need to "Publish" all changed pages following "editing" the
same.

I have searched Microsoft Windows knowledge base articles [ e.g.
260159 ]and similar knowledge base articles . Their instructive
solutions are very detailed but do not help me .

Am I missing something?

Please help . URGENT.

Gratefully

Dr. Gordon J. Fimio


How does one publish my [ approx. 30MB web ] from the remote web
site
to
my
local computer Please, this also very important.
 
Q

queensway555

May 26, 2004 10:00 p.m.

I feel that all of you well intentioned "advisors" are leading me into an
ever ending circle. I have submitted an extremely detailed description of my
problem. If you have seriously viewed and read the description , you will
note that some of your questions reflect your lack of same.

IN CONCLUSION: I have no problem connecting with my remote web site , as
described earlier. I have no problem executing a downloading of my remote
web site to my local computer folder. The progress box indicates the
downloading of all my .html files; overlays; themes; images ;multimedia are
successful . Then the "Processing Web Updates " begins and after several
minutes , the processing stops and "The Error Message" appears. The process
is 75 % complete , what is lacking , is the downloading of the Navigational
Structure. PLEASE FOCUS ON THIS . Why is the Nav. Structure omitted. at the
75 % stage of processing.????? Come to the point.





Thomas A. Rowe said:
If you are trying to publish from the remote server back to your local machine, the correct URL
would be:

http://localhost/websitename (no period or .com, etc.)

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
WEBMASTER Resources(tm)

FrontPage Resources, WebCircle, MS KB Quick Links, etc.
==============================================


Mr . Pepper:


May 26, 2004 May 26, 2004 12.00 p.m.



1] I entered the FrontPage Server Administrator via : C:\program
files\common files\microsoft shared\web server extensions\version 4.0
\bin\fpsradm.exe and executed the file

2] In the "DOS interface ; and from a long list of options ; I selected
[check and fix] .successfully. I trust that this means that FP extensions
are already installed locally. If there is another means , please advise.

3] RE tried the "Publish" procedure ; remote to local and received the
following message : "Could not find a web server at
Latinmass.bravepages.com"

Thank you one and all

Dr. Gordon J. Fimio [ posted on newsgroup ]


.


Tom Pepper Willett said:
Do you in fact have the FP server extensions installed on your local
machine?
Have you run a check and fix, or health on the extensions?
--------------------------------------------------------------------------
--
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Miss Anderson: following your suggestion , this occurred:

May 26 2004

Tried the "Publish " command again ; from the remote web site to my local
web site with no spaces in the web name [ wincopy32latinmass ] as
suggested.

COMMENT :

After 3 or so minutes into the download progression of files and
folders
,
the procedure stopped with the following message:

"The server could not complete your request. Contact your Internet Service
Provider or your Web server Administrator to make sure that the FrontPage
Server Extensions are installed. "

[Click "Details" ] "404 not found. The requested URL
/_vti_bin/_vti_aut/author.exe was not found on this server.

Apache/1.3.26 Server at ......fp.Ocatch.com Port 80.

[End of detailed mesage. ] Thank you.

Dr. Gordon J. Fimio






Dr. Fimio:
Try publishing to C:....\Gordon 3\My documents\wincopylatinmass
(without
the space in the web name).

--
~ Kathleen Anderson
Microsoft MVP - FrontPage
Spider Web Woman Designs
http://www.spiderwebwoman.com/resources/




Mr. Tom Pepper: An example of the execution which brings down the
error message , is the following::

1] In FP 2000 [ Open Web] [Go To [Web Folders] and select my
web
,
namely , [latinmass.bravepages.com] [Open]
2] Name and Password is requested. Name = latinmass.bravepages.com
the Password = **********
3] In Microsoft Front Page the remote web displays as an Internet
location ,namely, [ http://latinmass.bravepages.com ]
4] Select [File] [Publish]
5] Where to publish ? is requested. I created and selected a
temporary folder, namely, [C:....\Gordon 3\My documents\wincopy
latinmass ] 6] A progress box indicates that downloading from the
remote web site is taking place, successfully.
7] At 75% completion , Updating progress box displays , then the
progress stops and is interrupted by "The Error Message."
8] When I open the [C:....\Gordon 3\My documents\wincopy
latinmass ] into FP 2000 , all has been published except the
"Navigation Structure"

Comment : perhaps ,once we correct the source of the error message,
the "Publishing " will proceed to 100%

Thank you . for your kind efforts and trusting that what has been
submitted will clarify some issues for you to act upon.

Dr. Gordon J. Fimio



What happens when you use File | Publish and input the URL, rather
than just publish?
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]



-------------------------------------------------------------------------
-
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Miss Anderson: I did not add any files [large or small in MB
's]
to
either my remote web or its local counterpart. . My first exercise
after installing Windows 2000 , was to execute the "Publish"
command to publish from one local site to another local site
on
the
same "C" local disk and thus encountered for the first time, the
error message described. Thank you. I appreciate your efforts.



message Dr. Fimio:

What kind of changes did you make today? Did you add any files to
your web that are 1MB or larger?

--
~ Kathleen Anderson
Microsoft MVP - FrontPage
Spider Web Woman Designs
http://www.spiderwebwoman.com/resources/



FP 2000 error message May 24, 2004

MY relevant computer equipment includes the following

Windows 2000 Pro O/S

Front Page 2000

80GB HD

1 Gb memory

EZ Trust Anti virus

Linksys Firewall

I have had FP 2000 for years without an error messages of any
consequence. .

Today May 24 2004 : While trying to "Publish" web pages [ from
within FP 2000] which I have added or edited ; the following
interruption occurs

"An error occurred accessing your FrontPage web files. Authors :
if authoring against a web server, please contact the webmaster
for this server's site. WebMasters - please see the server's
system log for more details."

This error message followed the following exercise:

1] Installed a new 80 GB Hard drive

2] Re- installed Windows 2000 Pro

3] RE-installed FrontPage 2000

4] Opened FP 2000 and from a backup tape, I retrieved my
"latinmass.bravepages.com web from a local location.. So far so
good.

5] I cannot "Publish" my web pages from within FP2000 to another
local folder on my local disk as I used to do.

6] I cannot "Publish" my web pages from within FP2000 to my
remote web site [ namely www.latinmass.bravepages.com ] as I used
to do without the error message.

7] However; I can access my remote web site at
www.latinmass.bravepages.com successfully.

I need to "Publish" all changed pages following "editing" the
same.

I have searched Microsoft Windows knowledge base articles [ e.g.
260159 ]and similar knowledge base articles . Their instructive
solutions are very detailed but do not help me .

Am I missing something?

Please help . URGENT.

Gratefully

Dr. Gordon J. Fimio


How does one publish my [ approx. 30MB web ] from the remote web
site
to
my
local computer Please, this also very important.
 
T

Thomas A. Rowe

Question: Do you have any file in your web that is more than 1 MB in size?


Here is something that you can try:

1. Open FP, then open your site on the remote server, switch to folder view (root)

2. Open another FP window, then open your site on your local machine, switch to folder view (root)

3. Now back to the remote server, select all files, right click copy

4. Now select the FP window with the local copy, right click paste.
--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
WEBMASTER Resources(tm)

FrontPage Resources, WebCircle, MS KB Quick Links, etc.
==============================================


queensway555 said:
May 26, 2004 10:00 p.m.

I feel that all of you well intentioned "advisors" are leading me into an
ever ending circle. I have submitted an extremely detailed description of my
problem. If you have seriously viewed and read the description , you will
note that some of your questions reflect your lack of same.

IN CONCLUSION: I have no problem connecting with my remote web site , as
described earlier. I have no problem executing a downloading of my remote
web site to my local computer folder. The progress box indicates the
downloading of all my .html files; overlays; themes; images ;multimedia are
successful . Then the "Processing Web Updates " begins and after several
minutes , the processing stops and "The Error Message" appears. The process
is 75 % complete , what is lacking , is the downloading of the Navigational
Structure. PLEASE FOCUS ON THIS . Why is the Nav. Structure omitted. at the
75 % stage of processing.????? Come to the point.





Thomas A. Rowe said:
If you are trying to publish from the remote server back to your local machine, the correct URL
would be:

http://localhost/websitename (no period or .com, etc.)

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
WEBMASTER Resources(tm)

FrontPage Resources, WebCircle, MS KB Quick Links, etc.
==============================================
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp

Mr . Pepper:


May 26, 2004 May 26, 2004 12.00 p.m.



1] I entered the FrontPage Server Administrator via : C:\program
files\common files\microsoft shared\web server extensions\version 4.0
\bin\fpsradm.exe and executed the file

2] In the "DOS interface ; and from a long list of options ; I selected
[check and fix] .successfully. I trust that this means that FP extensions
are already installed locally. If there is another means , please advise.

3] RE tried the "Publish" procedure ; remote to local and received the
following message : "Could not find a web server at
Latinmass.bravepages.com"

Thank you one and all

Dr. Gordon J. Fimio [ posted on newsgroup ]


.


Do you in fact have the FP server extensions installed on your local
machine?
Have you run a check and fix, or health on the extensions?
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]
--------------------------------------------------------------------------
--
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Miss Anderson: following your suggestion , this occurred:

May 26 2004

Tried the "Publish " command again ; from the remote web site to my
local
web site with no spaces in the web name [ wincopy32latinmass ] as
suggested.

COMMENT :

After 3 or so minutes into the download progression of files and folders
,
the procedure stopped with the following message:

"The server could not complete your request. Contact your Internet
Service
Provider or your Web server Administrator to make sure that the
FrontPage
Server Extensions are installed. "

[Click "Details" ] "404 not found. The requested URL
/_vti_bin/_vti_aut/author.exe was not found on this server.

Apache/1.3.26 Server at ......fp.Ocatch.com Port 80.

[End of detailed mesage. ] Thank you.

Dr. Gordon J. Fimio






message
Dr. Fimio:
Try publishing to C:....\Gordon 3\My documents\wincopylatinmass
(without
the space in the web name).

--
~ Kathleen Anderson
Microsoft MVP - FrontPage
Spider Web Woman Designs
http://www.spiderwebwoman.com/resources/




Mr. Tom Pepper: An example of the execution which brings down the
error message , is the following::

1] In FP 2000 [ Open Web] [Go To [Web Folders] and select my web
,
namely , [latinmass.bravepages.com] [Open]
2] Name and Password is requested. Name =
latinmass.bravepages.com
the Password = **********
3] In Microsoft Front Page the remote web displays as an
Internet
location ,namely, [ http://latinmass.bravepages.com ]
4] Select [File] [Publish]
5] Where to publish ? is requested. I created and selected a
temporary folder, namely, [C:....\Gordon 3\My documents\wincopy
latinmass ] 6] A progress box indicates that downloading from the
remote web site is taking place, successfully.
7] At 75% completion , Updating progress box displays , then the
progress stops and is interrupted by "The Error Message."
8] When I open the [C:....\Gordon 3\My documents\wincopy
latinmass ] into FP 2000 , all has been published except the
"Navigation Structure"

Comment : perhaps ,once we correct the source of the error message,
the "Publishing " will proceed to 100%

Thank you . for your kind efforts and trusting that what has been
submitted will clarify some issues for you to act upon.

Dr. Gordon J. Fimio



What happens when you use File | Publish and input the URL, rather
than just publish?
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]




-------------------------------------------------------------------------
-
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support
see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Miss Anderson: I did not add any files [large or small in MB 's]
to
either my remote web or its local counterpart. . My first exercise
after installing Windows 2000 , was to execute the "Publish"
command to publish from one local site to another local site on
the
same "C" local disk and thus encountered for the first time, the
error message described. Thank you. I appreciate your efforts.



message Dr. Fimio:

What kind of changes did you make today? Did you add any files to
your web that are 1MB or larger?

--
~ Kathleen Anderson
Microsoft MVP - FrontPage
Spider Web Woman Designs
http://www.spiderwebwoman.com/resources/



FP 2000 error message May 24, 2004

MY relevant computer equipment includes the following

Windows 2000 Pro O/S

Front Page 2000

80GB HD

1 Gb memory

EZ Trust Anti virus

Linksys Firewall

I have had FP 2000 for years without an error messages of any
consequence. .

Today May 24 2004 : While trying to "Publish" web pages [ from
within FP 2000] which I have added or edited ; the following
interruption occurs

"An error occurred accessing your FrontPage web files. Authors :
if authoring against a web server, please contact the webmaster
for this server's site. WebMasters - please see the server's
system log for more details."

This error message followed the following exercise:

1] Installed a new 80 GB Hard drive

2] Re- installed Windows 2000 Pro

3] RE-installed FrontPage 2000

4] Opened FP 2000 and from a backup tape, I retrieved my
"latinmass.bravepages.com web from a local location.. So far so
good.

5] I cannot "Publish" my web pages from within FP2000 to another
local folder on my local disk as I used to do.

6] I cannot "Publish" my web pages from within FP2000 to my
remote web site [ namely www.latinmass.bravepages.com ] as I
used
to do without the error message.

7] However; I can access my remote web site at
www.latinmass.bravepages.com successfully.

I need to "Publish" all changed pages following "editing" the
same.

I have searched Microsoft Windows knowledge base articles [ e.g.
260159 ]and similar knowledge base articles . Their instructive
solutions are very detailed but do not help me .

Am I missing something?

Please help . URGENT.

Gratefully

Dr. Gordon J. Fimio


How does one publish my [ approx. 30MB web ] from the remote web
site
to
my
local computer Please, this also very important.
 
S

Stefan B Rusynko

On your local PC Find and delete all web cache files (*.web)
- Usually in the folder (paste/type below in your Windows Explorer address bar)
%APPDATA%\Microsoft\Web Server Extensions\Cache
Then open your remote site in FP and make a change in Nav view and run a Tools Recalculate Hyperlinks (this should force a new nav
structure meta file in your online web)
Next Select File Publish (changed pages only)
- you should get a prompt about nav changes - select the replace (middle) option

--




|
| May 26, 2004 10:00 p.m.
|
| I feel that all of you well intentioned "advisors" are leading me into an
| ever ending circle. I have submitted an extremely detailed description of my
| problem. If you have seriously viewed and read the description , you will
| note that some of your questions reflect your lack of same.
|
| IN CONCLUSION: I have no problem connecting with my remote web site , as
| described earlier. I have no problem executing a downloading of my remote
| web site to my local computer folder. The progress box indicates the
| downloading of all my .html files; overlays; themes; images ;multimedia are
| successful . Then the "Processing Web Updates " begins and after several
| minutes , the processing stops and "The Error Message" appears. The process
| is 75 % complete , what is lacking , is the downloading of the Navigational
| Structure. PLEASE FOCUS ON THIS . Why is the Nav. Structure omitted. at the
| 75 % stage of processing.????? Come to the point.
|
|
|
|
|
| | > If you are trying to publish from the remote server back to your local
| machine, the correct URL
| > would be:
| >
| > http://localhost/websitename (no period or .com, etc.)
| >
| > --
| > ==============================================
| > Thomas A. Rowe (Microsoft MVP - FrontPage)
| > WEBMASTER Resources(tm)
| >
| > FrontPage Resources, WebCircle, MS KB Quick Links, etc.
| > ==============================================
| > To assist you in getting the best answers for FrontPage support see:
| > http://www.net-sites.com/sitebuilder/newsgroups.asp
| >
| | > > Mr . Pepper:
| > >
| > >
| > > May 26, 2004 May 26, 2004 12.00 p.m.
| > >
| > >
| > >
| > > 1] I entered the FrontPage Server Administrator via : C:\program
| > > files\common files\microsoft shared\web server extensions\version 4.0
| > > \bin\fpsradm.exe and executed the file
| > >
| > > 2] In the "DOS interface ; and from a long list of options ; I selected
| > > [check and fix] .successfully. I trust that this means that FP
| extensions
| > > are already installed locally. If there is another means , please
| advise.
| > >
| > > 3] RE tried the "Publish" procedure ; remote to local and received the
| > > following message : "Could not find a web server at
| > > Latinmass.bravepages.com"
| > >
| > > Thank you one and all
| > >
| > > Dr. Gordon J. Fimio [ posted on newsgroup ]
| > >
| > >
| > > .
| > >
| > >
| > > | > > > Do you in fact have the FP server extensions installed on your local
| > > > machine?
| > > > Have you run a check and fix, or health on the extensions?
| > > > --
| > > > =====================================================
| > > > Tom Pepper Willett [Microsoft MVP - FrontPage]
| > >
| > --------------------------------------------------------------------------
| > > --
| > > > -
| > > > Microsoft FrontPage:
| > > > http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
| > > > http://msdn.microsoft.com/office/understanding/frontpage/
| > > > To assist you in getting the best answers for FrontPage support see:
| > > > http://www.net-sites.com/sitebuilder/newsgroups.asp
| > > > =====================================================
| > > > | > > > > Miss Anderson: following your suggestion , this occurred:
| > > > >
| > > > > May 26 2004
| > > > >
| > > > > Tried the "Publish " command again ; from the remote web site to my
| > > local
| > > > > web site with no spaces in the web name [ wincopy32latinmass ] as
| > > > suggested.
| > > > >
| > > > > COMMENT :
| > > > >
| > > > > After 3 or so minutes into the download progression of files and
| folders
| > > ,
| > > > > the procedure stopped with the following message:
| > > > >
| > > > > "The server could not complete your request. Contact your Internet
| > > Service
| > > > > Provider or your Web server Administrator to make sure that the
| > > FrontPage
| > > > > Server Extensions are installed. "
| > > > >
| > > > > [Click "Details" ] "404 not found. The requested URL
| > > > > /_vti_bin/_vti_aut/author.exe was not found on this server.
| > > > >
| > > > > Apache/1.3.26 Server at ......fp.Ocatch.com Port 80.
| > > > >
| > > > > [End of detailed mesage. ] Thank you.
| > > > >
| > > > > Dr. Gordon J. Fimio
| > > > >
| > > > >
| > > > >
| > > > >
| > > > >
| > > > >
| > > message
| > > > > | > > > > > Dr. Fimio:
| > > > > > Try publishing to C:....\Gordon 3\My documents\wincopylatinmass
| > > > > (without
| > > > > > the space in the web name).
| > > > > >
| > > > > > --
| > > > > > ~ Kathleen Anderson
| > > > > > Microsoft MVP - FrontPage
| > > > > > Spider Web Woman Designs
| > > > > > http://www.spiderwebwoman.com/resources/
| > > > > >
| > > > > >
| > > > > >
| > > > > >
| > > > > > > Mr. Tom Pepper: An example of the execution which brings down
| the
| > > > > > > error message , is the following::
| > > > > > >
| > > > > > > 1] In FP 2000 [ Open Web] [Go To [Web Folders] and select my
| web
| > > ,
| > > > > > > namely , [latinmass.bravepages.com] [Open]
| > > > > > > 2] Name and Password is requested. Name =
| > > latinmass.bravepages.com
| > > > > > > the Password = **********
| > > > > > > 3] In Microsoft Front Page the remote web displays as an
| > > Internet
| > > > > > > location ,namely, [ http://latinmass.bravepages.com ]
| > > > > > > 4] Select [File] [Publish]
| > > > > > > 5] Where to publish ? is requested. I created and
| selected a
| > > > > > > temporary folder, namely, [C:....\Gordon 3\My documents\wincopy
| > > > > > > latinmass ] 6] A progress box indicates that downloading from
| the
| > > > > > > remote web site is taking place, successfully.
| > > > > > > 7] At 75% completion , Updating progress box displays , then
| the
| > > > > > > progress stops and is interrupted by "The Error Message."
| > > > > > > 8] When I open the [C:....\Gordon 3\My documents\wincopy
| > > > > > > latinmass ] into FP 2000 , all has been published except the
| > > > > > > "Navigation Structure"
| > > > > > >
| > > > > > > Comment : perhaps ,once we correct the source of the error
| message,
| > > > > > > the "Publishing " will proceed to 100%
| > > > > > >
| > > > > > > Thank you . for your kind efforts and trusting that what has
| been
| > > > > > > submitted will clarify some issues for you to act upon.
| > > > > > >
| > > > > > > Dr. Gordon J. Fimio
| > > > > > >
| > > > > > >
| > > > > > >
| > > > > > > | > > > > > >> What happens when you use File | Publish and input the URL,
| rather
| > > > > > >> than just publish?
| > > > > > >> --
| > > > > > >> =====================================================
| > > > > > >> Tom Pepper Willett [Microsoft MVP - FrontPage]
| > > > > >
| > > > >
| > > >
| > >
| >> -------------------------------------------------------------------------
| > > > > > -
| > > > > > >> -
| > > > > > >> Microsoft FrontPage:
| > > > > > >>
| http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
| > > > > > >> http://msdn.microsoft.com/office/understanding/frontpage/
| > > > > > >> To assist you in getting the best answers for FrontPage support
| > > see:
| > > > > > >> http://www.net-sites.com/sitebuilder/newsgroups.asp
| > > > > > >> =====================================================
| > > > > > >> | > > > > > >>> Miss Anderson: I did not add any files [large or small in MB
| 's]
| > > to
| > > > > > >>> either my remote web or its local counterpart. . My first
| exercise
| > > > > > >>> after installing Windows 2000 , was to execute the "Publish"
| > > > > > >>> command to publish from one local site to another local site
| on
| > > the
| > > > > > >>> same "C" local disk and thus encountered for the first time,
| the
| > > > > > >>> error message described. Thank you. I appreciate your efforts.
| > > > > > >>>
| > > > > > >>>
| > > > > > >>>
| in
| > > > > > >>> message | > > > > > >>>> Dr. Fimio:
| > > > > > >>>>
| > > > > > >>>> What kind of changes did you make today? Did you add any
| files to
| > > > > > >>>> your web that are 1MB or larger?
| > > > > > >>>>
| > > > > > >>>> --
| > > > > > >>>> ~ Kathleen Anderson
| > > > > > >>>> Microsoft MVP - FrontPage
| > > > > > >>>> Spider Web Woman Designs
| > > > > > >>>> http://www.spiderwebwoman.com/resources/
| > > > > > >>>>
| > > > > > >>>>
| > > > > > >>>>
| > > > > > >>>> | > > > > > >>>>> FP 2000 error message May 24, 2004
| > > > > > >>>>>
| > > > > > >>>>> MY relevant computer equipment includes the following
| > > > > > >>>>>
| > > > > > >>>>> Windows 2000 Pro O/S
| > > > > > >>>>>
| > > > > > >>>>> Front Page 2000
| > > > > > >>>>>
| > > > > > >>>>> 80GB HD
| > > > > > >>>>>
| > > > > > >>>>> 1 Gb memory
| > > > > > >>>>>
| > > > > > >>>>> EZ Trust Anti virus
| > > > > > >>>>>
| > > > > > >>>>> Linksys Firewall
| > > > > > >>>>>
| > > > > > >>>>> I have had FP 2000 for years without an error messages of
| any
| > > > > > >>>>> consequence. .
| > > > > > >>>>>
| > > > > > >>>>> Today May 24 2004 : While trying to "Publish" web pages [
| from
| > > > > > >>>>> within FP 2000] which I have added or edited ; the following
| > > > > > >>>>> interruption occurs
| > > > > > >>>>>
| > > > > > >>>>> "An error occurred accessing your FrontPage web files.
| Authors :
| > > > > > >>>>> if authoring against a web server, please contact the
| webmaster
| > > > > > >>>>> for this server's site. WebMasters - please see the server's
| > > > > > >>>>> system log for more details."
| > > > > > >>>>>
| > > > > > >>>>> This error message followed the following exercise:
| > > > > > >>>>>
| > > > > > >>>>> 1] Installed a new 80 GB Hard drive
| > > > > > >>>>>
| > > > > > >>>>> 2] Re- installed Windows 2000 Pro
| > > > > > >>>>>
| > > > > > >>>>> 3] RE-installed FrontPage 2000
| > > > > > >>>>>
| > > > > > >>>>> 4] Opened FP 2000 and from a backup tape, I retrieved my
| > > > > > >>>>> "latinmass.bravepages.com web from a local location.. So far
| so
| > > > > > >>>>> good.
| > > > > > >>>>>
| > > > > > >>>>> 5] I cannot "Publish" my web pages from within FP2000 to
| another
| > > > > > >>>>> local folder on my local disk as I used to do.
| > > > > > >>>>>
| > > > > > >>>>> 6] I cannot "Publish" my web pages from within FP2000 to my
| > > > > > >>>>> remote web site [ namely www.latinmass.bravepages.com ] as I
| > > used
| > > > > > >>>>> to do without the error message.
| > > > > > >>>>>
| > > > > > >>>>> 7] However; I can access my remote web site at
| > > > > > >>>>> www.latinmass.bravepages.com successfully.
| > > > > > >>>>>
| > > > > > >>>>> I need to "Publish" all changed pages following "editing"
| the
| > > > > > >>>>> same.
| > > > > > >>>>>
| > > > > > >>>>> I have searched Microsoft Windows knowledge base articles
| [ e.g.
| > > > > > >>>>> 260159 ]and similar knowledge base articles . Their
| instructive
| > > > > > >>>>> solutions are very detailed but do not help me .
| > > > > > >>>>>
| > > > > > >>>>> Am I missing something?
| > > > > > >>>>>
| > > > > > >>>>> Please help . URGENT.
| > > > > > >>>>>
| > > > > > >>>>> Gratefully
| > > > > > >>>>>
| > > > > > >>>>> Dr. Gordon J. Fimio
| > > > > > >>>>>
| > > > > > >>>>>
| > > > > > >>>>> How does one publish my [ approx. 30MB web ] from the remote
| web
| > > > > > > site
| > > > > > >> to
| > > > > > >>>> my
| > > > > > >>>>> local computer Please, this also very important.
| > > > > >
| > > > >
| > > > >
| > > >
| > > >
| > >
| > >
| >
| >
|
|
 
Q

queensway555

May 26, 2004 10:00 p.m.

I feel that all of you well intentioned "advisors" are leading me into an
ever ending circle. I have submitted an extremely detailed description of my
problem.

IN CONCLUSION: I have no problem connecting with my remote web site , as
described earlier. I have no problem executing a downloading of my remote
web site to my local computer folder. The progress box indicates the
downloading of all my .html files; overlays; themes; images ;multimedia is
successful . Then the "Processing Web Updates " begins and after several
minutes , the processing stops and "The Error Message" appears. The process
is 75 % complete , what is lacking , is the downloading of the Navigational
Structure. PLEASE FOCUS ON THIS . Why is the Nav. Structure omitted. at the
75 % stage of processing.????? .

Dr. Gordon J. Fimio ...Thanks you




Thomas A. Rowe said:
If you are trying to publish from the remote server back to your local machine, the correct URL
would be:

http://localhost/websitename (no period or .com, etc.)

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
WEBMASTER Resources(tm)

FrontPage Resources, WebCircle, MS KB Quick Links, etc.
==============================================


Mr . Pepper:


May 26, 2004 May 26, 2004 12.00 p.m.



1] I entered the FrontPage Server Administrator via : C:\program
files\common files\microsoft shared\web server extensions\version 4.0
\bin\fpsradm.exe and executed the file

2] In the "DOS interface ; and from a long list of options ; I selected
[check and fix] .successfully. I trust that this means that FP extensions
are already installed locally. If there is another means , please advise.

3] RE tried the "Publish" procedure ; remote to local and received the
following message : "Could not find a web server at
Latinmass.bravepages.com"

Thank you one and all

Dr. Gordon J. Fimio [ posted on newsgroup ]


.


Tom Pepper Willett said:
Do you in fact have the FP server extensions installed on your local
machine?
Have you run a check and fix, or health on the extensions?
--------------------------------------------------------------------------
--
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Miss Anderson: following your suggestion , this occurred:

May 26 2004

Tried the "Publish " command again ; from the remote web site to my local
web site with no spaces in the web name [ wincopy32latinmass ] as
suggested.

COMMENT :

After 3 or so minutes into the download progression of files and
folders
,
the procedure stopped with the following message:

"The server could not complete your request. Contact your Internet Service
Provider or your Web server Administrator to make sure that the FrontPage
Server Extensions are installed. "

[Click "Details" ] "404 not found. The requested URL
/_vti_bin/_vti_aut/author.exe was not found on this server.

Apache/1.3.26 Server at ......fp.Ocatch.com Port 80.

[End of detailed mesage. ] Thank you.

Dr. Gordon J. Fimio






Dr. Fimio:
Try publishing to C:....\Gordon 3\My documents\wincopylatinmass
(without
the space in the web name).

--
~ Kathleen Anderson
Microsoft MVP - FrontPage
Spider Web Woman Designs
http://www.spiderwebwoman.com/resources/




Mr. Tom Pepper: An example of the execution which brings down the
error message , is the following::

1] In FP 2000 [ Open Web] [Go To [Web Folders] and select my
web
,
namely , [latinmass.bravepages.com] [Open]
2] Name and Password is requested. Name = latinmass.bravepages.com
the Password = **********
3] In Microsoft Front Page the remote web displays as an Internet
location ,namely, [ http://latinmass.bravepages.com ]
4] Select [File] [Publish]
5] Where to publish ? is requested. I created and selected a
temporary folder, namely, [C:....\Gordon 3\My documents\wincopy
latinmass ] 6] A progress box indicates that downloading from the
remote web site is taking place, successfully.
7] At 75% completion , Updating progress box displays , then the
progress stops and is interrupted by "The Error Message."
8] When I open the [C:....\Gordon 3\My documents\wincopy
latinmass ] into FP 2000 , all has been published except the
"Navigation Structure"

Comment : perhaps ,once we correct the source of the error message,
the "Publishing " will proceed to 100%

Thank you . for your kind efforts and trusting that what has been
submitted will clarify some issues for you to act upon.

Dr. Gordon J. Fimio



What happens when you use File | Publish and input the URL, rather
than just publish?
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]



-------------------------------------------------------------------------
-
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Miss Anderson: I did not add any files [large or small in MB
's]
to
either my remote web or its local counterpart. . My first exercise
after installing Windows 2000 , was to execute the "Publish"
command to publish from one local site to another local site
on
the
same "C" local disk and thus encountered for the first time, the
error message described. Thank you. I appreciate your efforts.



message Dr. Fimio:

What kind of changes did you make today? Did you add any files to
your web that are 1MB or larger?

--
~ Kathleen Anderson
Microsoft MVP - FrontPage
Spider Web Woman Designs
http://www.spiderwebwoman.com/resources/



FP 2000 error message May 24, 2004

MY relevant computer equipment includes the following

Windows 2000 Pro O/S

Front Page 2000

80GB HD

1 Gb memory

EZ Trust Anti virus

Linksys Firewall

I have had FP 2000 for years without an error messages of any
consequence. .

Today May 24 2004 : While trying to "Publish" web pages [ from
within FP 2000] which I have added or edited ; the following
interruption occurs

"An error occurred accessing your FrontPage web files. Authors :
if authoring against a web server, please contact the webmaster
for this server's site. WebMasters - please see the server's
system log for more details."

This error message followed the following exercise:

1] Installed a new 80 GB Hard drive

2] Re- installed Windows 2000 Pro

3] RE-installed FrontPage 2000

4] Opened FP 2000 and from a backup tape, I retrieved my
"latinmass.bravepages.com web from a local location.. So far so
good.

5] I cannot "Publish" my web pages from within FP2000 to another
local folder on my local disk as I used to do.

6] I cannot "Publish" my web pages from within FP2000 to my
remote web site [ namely www.latinmass.bravepages.com ] as I used
to do without the error message.

7] However; I can access my remote web site at
www.latinmass.bravepages.com successfully.

I need to "Publish" all changed pages following "editing" the
same.

I have searched Microsoft Windows knowledge base articles [ e.g.
260159 ]and similar knowledge base articles . Their instructive
solutions are very detailed but do not help me .

Am I missing something?

Please help . URGENT.

Gratefully

Dr. Gordon J. Fimio


How does one publish my [ approx. 30MB web ] from the remote web
site
to
my
local computer Please, this also very important.
 
S

Stefan B Rusynko

There may be corruption in your meta data in your local or remote site that FP can't resolve

First do some clean up
1) In Windows Explorer Find and delete all FP Temp Files
- Usually in C:\WINDOWS\Temp and/or %USERPROFILE%\Local Settings\Temp
- In FP 2003 look in the super hidden folder
%USERPROFILE%\Local Settings\Temporary Internet Files\FrontPageTempDir
- also clear your IE TIF folder if you don't do so regularly
2) In Windows Explorer Find and delete all hidden web cache files (*.web)
- Usually in %USERPROFILE%\Application Data\Microsoft\Web Server Extensions\Cache

Next force FP to update your structure in both sites
Open your local site in FP, View Navigation, change anything (add a page), run Tools Recalculate Hyperlinks, close site
Open your remote site in FP, View Navigation, change anything else, run Tools Recalculate Hyperlinks
Note: this nav change will be the one that rules in both sites, so after the 1st change, do it again to get it back to what you want
and rerun the Recalc

Now try to publish your remote to your local (changed pages only)
- because of the above changes, FP should prompt you about navigation changes
Select the middle option (replace navigation)

--




|
| May 26, 2004 10:00 p.m.
|
| I feel that all of you well intentioned "advisors" are leading me into an
| ever ending circle. I have submitted an extremely detailed description of my
| problem.
|
| IN CONCLUSION: I have no problem connecting with my remote web site , as
| described earlier. I have no problem executing a downloading of my remote
| web site to my local computer folder. The progress box indicates the
| downloading of all my .html files; overlays; themes; images ;multimedia is
| successful . Then the "Processing Web Updates " begins and after several
| minutes , the processing stops and "The Error Message" appears. The process
| is 75 % complete , what is lacking , is the downloading of the Navigational
| Structure. PLEASE FOCUS ON THIS . Why is the Nav. Structure omitted. at the
| 75 % stage of processing.????? .
|
| Dr. Gordon J. Fimio ...Thanks you
|
|
|
|
| | > If you are trying to publish from the remote server back to your local
| machine, the correct URL
| > would be:
| >
| > http://localhost/websitename (no period or .com, etc.)
| >
| > --
| > ==============================================
| > Thomas A. Rowe (Microsoft MVP - FrontPage)
| > WEBMASTER Resources(tm)
| >
| > FrontPage Resources, WebCircle, MS KB Quick Links, etc.
| > ==============================================
| > To assist you in getting the best answers for FrontPage support see:
| > http://www.net-sites.com/sitebuilder/newsgroups.asp
| >
| | > > Mr . Pepper:
| > >
| > >
| > > May 26, 2004 May 26, 2004 12.00 p.m.
| > >
| > >
| > >
| > > 1] I entered the FrontPage Server Administrator via : C:\program
| > > files\common files\microsoft shared\web server extensions\version 4.0
| > > \bin\fpsradm.exe and executed the file
| > >
| > > 2] In the "DOS interface ; and from a long list of options ; I selected
| > > [check and fix] .successfully. I trust that this means that FP
| extensions
| > > are already installed locally. If there is another means , please
| advise.
| > >
| > > 3] RE tried the "Publish" procedure ; remote to local and received the
| > > following message : "Could not find a web server at
| > > Latinmass.bravepages.com"
| > >
| > > Thank you one and all
| > >
| > > Dr. Gordon J. Fimio [ posted on newsgroup ]
| > >
| > >
| > > .
| > >
| > >
| > > | > > > Do you in fact have the FP server extensions installed on your local
| > > > machine?
| > > > Have you run a check and fix, or health on the extensions?
| > > > --
| > > > =====================================================
| > > > Tom Pepper Willett [Microsoft MVP - FrontPage]
| > >
| > --------------------------------------------------------------------------
| > > --
| > > > -
| > > > Microsoft FrontPage:
| > > > http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
| > > > http://msdn.microsoft.com/office/understanding/frontpage/
| > > > To assist you in getting the best answers for FrontPage support see:
| > > > http://www.net-sites.com/sitebuilder/newsgroups.asp
| > > > =====================================================
| > > > | > > > > Miss Anderson: following your suggestion , this occurred:
| > > > >
| > > > > May 26 2004
| > > > >
| > > > > Tried the "Publish " command again ; from the remote web site to my
| > > local
| > > > > web site with no spaces in the web name [ wincopy32latinmass ] as
| > > > suggested.
| > > > >
| > > > > COMMENT :
| > > > >
| > > > > After 3 or so minutes into the download progression of files and
| folders
| > > ,
| > > > > the procedure stopped with the following message:
| > > > >
| > > > > "The server could not complete your request. Contact your Internet
| > > Service
| > > > > Provider or your Web server Administrator to make sure that the
| > > FrontPage
| > > > > Server Extensions are installed. "
| > > > >
| > > > > [Click "Details" ] "404 not found. The requested URL
| > > > > /_vti_bin/_vti_aut/author.exe was not found on this server.
| > > > >
| > > > > Apache/1.3.26 Server at ......fp.Ocatch.com Port 80.
| > > > >
| > > > > [End of detailed mesage. ] Thank you.
| > > > >
| > > > > Dr. Gordon J. Fimio
| > > > >
| > > > >
| > > > >
| > > > >
| > > > >
| > > > >
| > > message
| > > > > | > > > > > Dr. Fimio:
| > > > > > Try publishing to C:....\Gordon 3\My documents\wincopylatinmass
| > > > > (without
| > > > > > the space in the web name).
| > > > > >
| > > > > > --
| > > > > > ~ Kathleen Anderson
| > > > > > Microsoft MVP - FrontPage
| > > > > > Spider Web Woman Designs
| > > > > > http://www.spiderwebwoman.com/resources/
| > > > > >
| > > > > >
| > > > > >
| > > > > >
| > > > > > > Mr. Tom Pepper: An example of the execution which brings down
| the
| > > > > > > error message , is the following::
| > > > > > >
| > > > > > > 1] In FP 2000 [ Open Web] [Go To [Web Folders] and select my
| web
| > > ,
| > > > > > > namely , [latinmass.bravepages.com] [Open]
| > > > > > > 2] Name and Password is requested. Name =
| > > latinmass.bravepages.com
| > > > > > > the Password = **********
| > > > > > > 3] In Microsoft Front Page the remote web displays as an
| > > Internet
| > > > > > > location ,namely, [ http://latinmass.bravepages.com ]
| > > > > > > 4] Select [File] [Publish]
| > > > > > > 5] Where to publish ? is requested. I created and
| selected a
| > > > > > > temporary folder, namely, [C:....\Gordon 3\My documents\wincopy
| > > > > > > latinmass ] 6] A progress box indicates that downloading from
| the
| > > > > > > remote web site is taking place, successfully.
| > > > > > > 7] At 75% completion , Updating progress box displays , then
| the
| > > > > > > progress stops and is interrupted by "The Error Message."
| > > > > > > 8] When I open the [C:....\Gordon 3\My documents\wincopy
| > > > > > > latinmass ] into FP 2000 , all has been published except the
| > > > > > > "Navigation Structure"
| > > > > > >
| > > > > > > Comment : perhaps ,once we correct the source of the error
| message,
| > > > > > > the "Publishing " will proceed to 100%
| > > > > > >
| > > > > > > Thank you . for your kind efforts and trusting that what has
| been
| > > > > > > submitted will clarify some issues for you to act upon.
| > > > > > >
| > > > > > > Dr. Gordon J. Fimio
| > > > > > >
| > > > > > >
| > > > > > >
| > > > > > > | > > > > > >> What happens when you use File | Publish and input the URL,
| rather
| > > > > > >> than just publish?
| > > > > > >> --
| > > > > > >> =====================================================
| > > > > > >> Tom Pepper Willett [Microsoft MVP - FrontPage]
| > > > > >
| > > > >
| > > >
| > >
| >> -------------------------------------------------------------------------
| > > > > > -
| > > > > > >> -
| > > > > > >> Microsoft FrontPage:
| > > > > > >>
| http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
| > > > > > >> http://msdn.microsoft.com/office/understanding/frontpage/
| > > > > > >> To assist you in getting the best answers for FrontPage support
| > > see:
| > > > > > >> http://www.net-sites.com/sitebuilder/newsgroups.asp
| > > > > > >> =====================================================
| > > > > > >> | > > > > > >>> Miss Anderson: I did not add any files [large or small in MB
| 's]
| > > to
| > > > > > >>> either my remote web or its local counterpart. . My first
| exercise
| > > > > > >>> after installing Windows 2000 , was to execute the "Publish"
| > > > > > >>> command to publish from one local site to another local site
| on
| > > the
| > > > > > >>> same "C" local disk and thus encountered for the first time,
| the
| > > > > > >>> error message described. Thank you. I appreciate your efforts.
| > > > > > >>>
| > > > > > >>>
| > > > > > >>>
| in
| > > > > > >>> message | > > > > > >>>> Dr. Fimio:
| > > > > > >>>>
| > > > > > >>>> What kind of changes did you make today? Did you add any
| files to
| > > > > > >>>> your web that are 1MB or larger?
| > > > > > >>>>
| > > > > > >>>> --
| > > > > > >>>> ~ Kathleen Anderson
| > > > > > >>>> Microsoft MVP - FrontPage
| > > > > > >>>> Spider Web Woman Designs
| > > > > > >>>> http://www.spiderwebwoman.com/resources/
| > > > > > >>>>
| > > > > > >>>>
| > > > > > >>>>
| > > > > > >>>> | > > > > > >>>>> FP 2000 error message May 24, 2004
| > > > > > >>>>>
| > > > > > >>>>> MY relevant computer equipment includes the following
| > > > > > >>>>>
| > > > > > >>>>> Windows 2000 Pro O/S
| > > > > > >>>>>
| > > > > > >>>>> Front Page 2000
| > > > > > >>>>>
| > > > > > >>>>> 80GB HD
| > > > > > >>>>>
| > > > > > >>>>> 1 Gb memory
| > > > > > >>>>>
| > > > > > >>>>> EZ Trust Anti virus
| > > > > > >>>>>
| > > > > > >>>>> Linksys Firewall
| > > > > > >>>>>
| > > > > > >>>>> I have had FP 2000 for years without an error messages of
| any
| > > > > > >>>>> consequence. .
| > > > > > >>>>>
| > > > > > >>>>> Today May 24 2004 : While trying to "Publish" web pages [
| from
| > > > > > >>>>> within FP 2000] which I have added or edited ; the following
| > > > > > >>>>> interruption occurs
| > > > > > >>>>>
| > > > > > >>>>> "An error occurred accessing your FrontPage web files.
| Authors :
| > > > > > >>>>> if authoring against a web server, please contact the
| webmaster
| > > > > > >>>>> for this server's site. WebMasters - please see the server's
| > > > > > >>>>> system log for more details."
| > > > > > >>>>>
| > > > > > >>>>> This error message followed the following exercise:
| > > > > > >>>>>
| > > > > > >>>>> 1] Installed a new 80 GB Hard drive
| > > > > > >>>>>
| > > > > > >>>>> 2] Re- installed Windows 2000 Pro
| > > > > > >>>>>
| > > > > > >>>>> 3] RE-installed FrontPage 2000
| > > > > > >>>>>
| > > > > > >>>>> 4] Opened FP 2000 and from a backup tape, I retrieved my
| > > > > > >>>>> "latinmass.bravepages.com web from a local location.. So far
| so
| > > > > > >>>>> good.
| > > > > > >>>>>
| > > > > > >>>>> 5] I cannot "Publish" my web pages from within FP2000 to
| another
| > > > > > >>>>> local folder on my local disk as I used to do.
| > > > > > >>>>>
| > > > > > >>>>> 6] I cannot "Publish" my web pages from within FP2000 to my
| > > > > > >>>>> remote web site [ namely www.latinmass.bravepages.com ] as I
| > > used
| > > > > > >>>>> to do without the error message.
| > > > > > >>>>>
| > > > > > >>>>> 7] However; I can access my remote web site at
| > > > > > >>>>> www.latinmass.bravepages.com successfully.
| > > > > > >>>>>
| > > > > > >>>>> I need to "Publish" all changed pages following "editing"
| the
| > > > > > >>>>> same.
| > > > > > >>>>>
| > > > > > >>>>> I have searched Microsoft Windows knowledge base articles
| [ e.g.
| > > > > > >>>>> 260159 ]and similar knowledge base articles . Their
| instructive
| > > > > > >>>>> solutions are very detailed but do not help me .
| > > > > > >>>>>
| > > > > > >>>>> Am I missing something?
| > > > > > >>>>>
| > > > > > >>>>> Please help . URGENT.
| > > > > > >>>>>
| > > > > > >>>>> Gratefully
| > > > > > >>>>>
| > > > > > >>>>> Dr. Gordon J. Fimio
| > > > > > >>>>>
| > > > > > >>>>>
| > > > > > >>>>> How does one publish my [ approx. 30MB web ] from the remote
| web
| > > > > > > site
| > > > > > >> to
| > > > > > >>>> my
| > > > > > >>>>> local computer Please, this also very important.
| > > > > >
| > > > >
| > > > >
| > > >
| > > >
| > >
| > >
| >
| >
|
|
 
G

Guest

Dr.,

I'm experiencing the same problem. Did you ever get it resolved? How? Did it have anything to do with having a file over 1MB?

Thanks,

Bob

queensway555 said:
May 26, 2004 10:00 p.m.

I feel that all of you well intentioned "advisors" are leading me into an
ever ending circle. I have submitted an extremely detailed description of my
problem.

IN CONCLUSION: I have no problem connecting with my remote web site , as
described earlier. I have no problem executing a downloading of my remote
web site to my local computer folder. The progress box indicates the
downloading of all my .html files; overlays; themes; images ;multimedia is
successful . Then the "Processing Web Updates " begins and after several
minutes , the processing stops and "The Error Message" appears. The process
is 75 % complete , what is lacking , is the downloading of the Navigational
Structure. PLEASE FOCUS ON THIS . Why is the Nav. Structure omitted. at the
75 % stage of processing.????? .

Dr. Gordon J. Fimio ...Thanks you




Thomas A. Rowe said:
If you are trying to publish from the remote server back to your local machine, the correct URL
would be:

http://localhost/websitename (no period or .com, etc.)

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
WEBMASTER Resources(tm)

FrontPage Resources, WebCircle, MS KB Quick Links, etc.
==============================================
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp

Mr . Pepper:


May 26, 2004 May 26, 2004 12.00 p.m.



1] I entered the FrontPage Server Administrator via : C:\program
files\common files\microsoft shared\web server extensions\version 4.0
\bin\fpsradm.exe and executed the file

2] In the "DOS interface ; and from a long list of options ; I selected
[check and fix] .successfully. I trust that this means that FP extensions
are already installed locally. If there is another means , please advise.

3] RE tried the "Publish" procedure ; remote to local and received the
following message : "Could not find a web server at
Latinmass.bravepages.com"

Thank you one and all

Dr. Gordon J. Fimio [ posted on newsgroup ]


.


Do you in fact have the FP server extensions installed on your local
machine?
Have you run a check and fix, or health on the extensions?
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]
--------------------------------------------------------------------------
--
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Miss Anderson: following your suggestion , this occurred:

May 26 2004

Tried the "Publish " command again ; from the remote web site to my
local
web site with no spaces in the web name [ wincopy32latinmass ] as
suggested.

COMMENT :

After 3 or so minutes into the download progression of files and folders
,
the procedure stopped with the following message:

"The server could not complete your request. Contact your Internet
Service
Provider or your Web server Administrator to make sure that the
FrontPage
Server Extensions are installed. "

[Click "Details" ] "404 not found. The requested URL
/_vti_bin/_vti_aut/author.exe was not found on this server.

Apache/1.3.26 Server at ......fp.Ocatch.com Port 80.

[End of detailed mesage. ] Thank you.

Dr. Gordon J. Fimio






message
Dr. Fimio:
Try publishing to C:....\Gordon 3\My documents\wincopylatinmass
(without
the space in the web name).

--
~ Kathleen Anderson
Microsoft MVP - FrontPage
Spider Web Woman Designs
http://www.spiderwebwoman.com/resources/




Mr. Tom Pepper: An example of the execution which brings down the
error message , is the following::

1] In FP 2000 [ Open Web] [Go To [Web Folders] and select my web
,
namely , [latinmass.bravepages.com] [Open]
2] Name and Password is requested. Name =
latinmass.bravepages.com
the Password = **********
3] In Microsoft Front Page the remote web displays as an
Internet
location ,namely, [ http://latinmass.bravepages.com ]
4] Select [File] [Publish]
5] Where to publish ? is requested. I created and selected a
temporary folder, namely, [C:....\Gordon 3\My documents\wincopy
latinmass ] 6] A progress box indicates that downloading from the
remote web site is taking place, successfully.
7] At 75% completion , Updating progress box displays , then the
progress stops and is interrupted by "The Error Message."
8] When I open the [C:....\Gordon 3\My documents\wincopy
latinmass ] into FP 2000 , all has been published except the
"Navigation Structure"

Comment : perhaps ,once we correct the source of the error message,
the "Publishing " will proceed to 100%

Thank you . for your kind efforts and trusting that what has been
submitted will clarify some issues for you to act upon.

Dr. Gordon J. Fimio



What happens when you use File | Publish and input the URL, rather
than just publish?
--
=====================================================
Tom Pepper Willett [Microsoft MVP - FrontPage]




-------------------------------------------------------------------------
-
-
Microsoft FrontPage:
http://www.microsoft.com/office/frontpage/prodinfo/default.mspx
http://msdn.microsoft.com/office/understanding/frontpage/
To assist you in getting the best answers for FrontPage support
see:
http://www.net-sites.com/sitebuilder/newsgroups.asp
=====================================================
Miss Anderson: I did not add any files [large or small in MB 's]
to
either my remote web or its local counterpart. . My first exercise
after installing Windows 2000 , was to execute the "Publish"
command to publish from one local site to another local site on
the
same "C" local disk and thus encountered for the first time, the
error message described. Thank you. I appreciate your efforts.



message Dr. Fimio:

What kind of changes did you make today? Did you add any files to
your web that are 1MB or larger?

--
~ Kathleen Anderson
Microsoft MVP - FrontPage
Spider Web Woman Designs
http://www.spiderwebwoman.com/resources/



FP 2000 error message May 24, 2004

MY relevant computer equipment includes the following

Windows 2000 Pro O/S

Front Page 2000

80GB HD

1 Gb memory

EZ Trust Anti virus

Linksys Firewall

I have had FP 2000 for years without an error messages of any
consequence. .

Today May 24 2004 : While trying to "Publish" web pages [ from
within FP 2000] which I have added or edited ; the following
interruption occurs

"An error occurred accessing your FrontPage web files. Authors :
if authoring against a web server, please contact the webmaster
for this server's site. WebMasters - please see the server's
system log for more details."

This error message followed the following exercise:

1] Installed a new 80 GB Hard drive

2] Re- installed Windows 2000 Pro

3] RE-installed FrontPage 2000

4] Opened FP 2000 and from a backup tape, I retrieved my
"latinmass.bravepages.com web from a local location.. So far so
good.

5] I cannot "Publish" my web pages from within FP2000 to another
local folder on my local disk as I used to do.

6] I cannot "Publish" my web pages from within FP2000 to my
remote web site [ namely www.latinmass.bravepages.com ] as I
used
to do without the error message.

7] However; I can access my remote web site at
www.latinmass.bravepages.com successfully.

I need to "Publish" all changed pages following "editing" the
same.

I have searched Microsoft Windows knowledge base articles [ e.g.
260159 ]and similar knowledge base articles . Their instructive
solutions are very detailed but do not help me .

Am I missing something?

Please help . URGENT.

Gratefully

Dr. Gordon J. Fimio


How does one publish my [ approx. 30MB web ] from the remote web
site
to
my
local computer Please, this also very important.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads


Top