G
Guest
We are running SBS2000 on a network with around 30 Fujitsu-Siemens machines
running XP Pro.
This machine is only a few months old, was not used heavily on the network
until 2 weeks ago, when the user kept getting blue screens:
KERNAL_STACK_INPAGE_ERROR which led me to believe the HDD was on its way out!
I ran CHKDSK /R when booting the machine using the Rec Console, and it fixed
a problem maybe at around 70%+. I was expecting the machine to run fine
after that but it hung again with the same blue screen.
Pressing <Ctl><Alt><Del> does not bring the machine back to life, it throws
you back at BIOS level the fact that there is a hardware problem, code 0200
off the top of my head. You need to physically press the off button and
power it back up for WinXP Pro to load.
Event Viewer gave me no insight into this. I only got a couple of
notifications at around this time of an application hang (Event ID: 1002)
for act.exe version 6.0.3.979.
Can someone please advise me on this as it is very confusing!
SKC
running XP Pro.
This machine is only a few months old, was not used heavily on the network
until 2 weeks ago, when the user kept getting blue screens:
KERNAL_STACK_INPAGE_ERROR which led me to believe the HDD was on its way out!
I ran CHKDSK /R when booting the machine using the Rec Console, and it fixed
a problem maybe at around 70%+. I was expecting the machine to run fine
after that but it hung again with the same blue screen.
Pressing <Ctl><Alt><Del> does not bring the machine back to life, it throws
you back at BIOS level the fact that there is a hardware problem, code 0200
off the top of my head. You need to physically press the off button and
power it back up for WinXP Pro to load.
Event Viewer gave me no insight into this. I only got a couple of
notifications at around this time of an application hang (Event ID: 1002)
for act.exe version 6.0.3.979.
Can someone please advise me on this as it is very confusing!
SKC