P
Patrick Dunford
We have one of these with 128MB installed in a Gigabyte motherboard
Athlon XP2500.
It used to crash a lot and the ATI control panel would refuse to run at
startup and lots of error messages would be displayed.
Since windows updated itself to sp2 it is working a little better but
there are still one or two issues.
I have noticed that when display modes are changed the display
flickers/flashes a lot, this also happens at startup.
The other problem is with the secondary display port, if there is no
actual device connected the secondary display card detaches/deactivates
itself and has to be reactivated in the Control Panel.
We use this system's secondary display port to connect to a KVM switchbox
where two computers with dual head cards are sharing the same secondary
display device (a data projector). It would be a lot more convenient if
the secondary display card didn't disable itself on startup if the KVM is
set to the other computer.
Athlon XP2500.
It used to crash a lot and the ATI control panel would refuse to run at
startup and lots of error messages would be displayed.
Since windows updated itself to sp2 it is working a little better but
there are still one or two issues.
I have noticed that when display modes are changed the display
flickers/flashes a lot, this also happens at startup.
The other problem is with the secondary display port, if there is no
actual device connected the secondary display card detaches/deactivates
itself and has to be reactivated in the Control Panel.
We use this system's secondary display port to connect to a KVM switchbox
where two computers with dual head cards are sharing the same secondary
display device (a data projector). It would be a lot more convenient if
the secondary display card didn't disable itself on startup if the KVM is
set to the other computer.