peer-to-peer wireless network

[TrevorD]

Wireless network with three machines only works when two
of the machines are connected. When third machine wireless
enabled, the connection between this machine and one of
the others pulses on and off at about 2 seconds intervals.
It is always the same link which pulses. All machines
using TCP/IP and NetBui and have the same settings.

 

[David Tesar]

Trevor,

I have never seen this one before, but I would make sure that your Wireless
access point is configured correctly and has the latest firmware updates
from the manufacturer. Quite often the manufacturer will have fixes after
you bought the WAP for problems that they have had. Even if there are no
fixes in the firmware for your specific problem, resetting the WAP
sometimes fixes odd issues.

When you say that the "same link pulses", what do you mean by the same
link? Is it always one machine?

David Tesar
This posting is provided "AS IS" with no warranties, and confers no rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm
Note: For the benefit of the community-at-large, all responses to this
message are best directed to the newsgroup/thread from which they
originated.