P2B-DS CPU upgrade troubles :-(

[Morten L.]

Hi and thnx for spending time reading this

I'm trying to get my old P2B-DS HW.ver 1.06 up and running with a Celeron
900 (1,75V 100MHz FSB)
in a ASUSS 370DL CPU-card

BIOS is upgraded to 1014Beta3 and the Mobo is working fine with my old
350MHz


I cannot for sure find out, how to set the clockmultiplier.. ?!?!
FSB is set to 100MHz


generally ideas - or knowledge from similar systems is much appreciated



Regards
Morten

 

[Roland Scheidegger]

Hi and thnx for spending time reading this

I'm trying to get my old P2B-DS HW.ver 1.06 up and running with a Celeron
900 (1,75V 100MHz FSB)
in a ASUSS 370DL CPU-card

BIOS is upgraded to 1014Beta3 and the Mobo is working fine with my old
350MHz


I cannot for sure find out, how to set the clockmultiplier.. ?!?!

You don't and you can't - cpu is locked and has fixed multiplier. Set
the onboard multiplier to anything you want, it doesn't matter.

FSB is set to 100MHz Good.

generally ideas - or knowledge from similar systems is much appreciated

That should work without issues. Set the slotket to coppermine, and if
it doesn't boot, set the voltage jumpers on the S370DL to 1.8V - though
1.06 board revisions pretty much all seem to have voltage regulators
which can go down to 1.3V only 1.06 pcba D03 ones are guaranteed to have
them.

Roland

 

[Morten L.]

generally ideas - or knowledge from similar systems is much appreciated

That should work without issues. Set the slotket to coppermine, and if
it doesn't boot, set the voltage jumpers on the S370DL to 1.8V - though
1.06 board revisions pretty much all seem to have voltage regulators
which can go down to 1.3V only 1.06 pcba D03 ones are guaranteed to have
them.

Roland

THNX !!!

It works now.

/Morten