Outlook 2003 & DSL

[Guest]

HI use to be able to dial directly from the outlook contact files a contact
telephone number, and open a follow-up session to register the tmie.
since I am using an DSL voice line, I have not been able to dial a contact
phone number completely.
my setting of modems includes the following choices (French language):
- LIGNE IPCONF
- LIGNE H323
-Regular Modem Line (Which works fine)
1 - How do I configure the system, since when I try 'LIGNE IPCONF, Outlook
bounces me off with the message that an'internal error has occured at the
level of the automatic dialer, and that I should close the dialog box and
dial a number, and then reopen the dialog box'
Question?
How do I dial?
2 - If I configuire the system with LIGNE H323, the system seems to operate
until it stops and advises that it could not complete dialing!!!

Thanks for help.
JP.

 

[Hal Hostetler [MVP S/U]]

You would use the "Regular Modem Line" setting which should allow a standard
analog modem connected to the DSL line through a line filter (the same type
filter used to connect a standard telephone to a DSL line) to do the
dialing.

Hal
--
Hal Hostetler, CPBE -- (e-mail address removed)
Senior Engineer/MIS -- MS MVP-S/U -- WA7BGX
http://www.kvoa.com -- "When News breaks, we fix it!"
KVOA Television, Tucson, AZ. NBC Channel 4
Still Cadillacin' - www.badnewsbluesband.com

 

[Guest]

Thank you.
It only works if you have a solid connection beack to the DSL Service Box,
but apparently not through the Wi-Fi connection.
JP.