NTFS Volume Corrupt

[Bob]

I am running Win2K/SP4. I have the boot disk in a removable bay so I
can clone and swap for backup and archive. What I will describe
applies to all three WD 80GB Caviar disks.

Sometimes when I reboot the machine, I get a blue screen which forces
me to mount the corrupt disk in D: and run CHKDSK D: /f. That has
always cleaned up the disk so I can continue to boot from it.

Here is the output of CHKDSK. Please suggest some things I can do to
fix this nuisance problem.

+++
The type of the file system is NTFS.
Volume label is System.

CHKDSK is verifying files (stage 1 of 3)...
0 percent completed.
Deleted corrupt attribute list entry
with type code 128 in file 9.
Deleting corrupt attribute record (128, $SDS)
from file record segment 10251.
1 percent completed.
2 percent completed.
3 percent completed.
[...]
97 percent completed.
98 percent completed.
99 percent completed.
100 percent completed.
File verification completed.
Correcting cross-link for file 6729.
CHKDSK is verifying indexes (stage 2 of 3)...
0 percent completed.
1 percent completed.
2 percent completed.
3 percent completed.
[...]
97 percent completed.
98 percent completed.
99 percent completed.
100 percent completed.
Index verification completed.
CHKDSK is verifying security descriptors (stage 3 of 3)...
Repairing the security file record segment.
Deleting an index entry with Id 256 from index $SII of file 9.
Deleting an index entry with Id 257 from index $SII of file 9.
Deleting an index entry with Id 259 from index $SII of file 9.
[...]
Deleting an index entry with Id 436 from index $SDH of file 9.
Deleting an index entry with Id 406 from index $SDH of file 9.
Deleting an index entry with Id 435 from index $SDH of file 9.
0 percent completed.
Replacing invalid security id with default security id for file 11.
Replacing invalid security id with default security id for file 29.
Replacing invalid security id with default security id for file 43.
0 percent completed.
Security descriptor verification completed.
CHKDSK is verifying Usn Journal...
Repairing Usn Journal file record segment.
Usn Journal verification completed.
CHKDSK discovered free space marked as allocated in the
master file table (MFT) bitmap.
Correcting errors in the Volume Bitmap.
Windows has made corrections to the file system.

78148160 KB total disk space.
42498444 KB in 31285 files.
11004 KB in 2743 indexes.
0 KB in bad sectors.
172730 KB in use by the system.
65536 KB occupied by the log file.
35465981 KB available on disk.

512 bytes in each allocation unit.
156296321 total allocation units on disk.
70931963 allocation units available on disk.
+++


--

"One must realize that the world is a network of real and virtual
combat zones where the stakes are high, struggle is the primary
mode of being and only total victory is acceptable.
-- Sun Tzu, "The Art Of War"

 

[David H. Lipman]

From: "Bob" <[email protected]>

| I am running Win2K/SP4. I have the boot disk in a removable bay so I
| can clone and swap for backup and archive. What I will describe
| applies to all three WD 80GB Caviar disks.
|
| Sometimes when I reboot the machine, I get a blue screen which forces
| me to mount the corrupt disk in D: and run CHKDSK D: /f. That has
| always cleaned up the disk so I can continue to boot from it.
|
| Here is the output of CHKDSK. Please suggest some things I can do to
| fix this nuisance problem.
|
| +++
| The type of the file system is NTFS.
| Volume label is System.
|
| CHKDSK is verifying files (stage 1 of 3)...
| 0 percent completed.
| Deleted corrupt attribute list entry
| with type code 128 in file 9.
| Deleting corrupt attribute record (128, $SDS)
| from file record segment 10251.
| 1 percent completed.
| 2 percent completed.
| 3 percent completed.
| [...]
| 97 percent completed.
| 98 percent completed.
| 99 percent completed.
| 100 percent completed.
| File verification completed.
| Correcting cross-link for file 6729.
| CHKDSK is verifying indexes (stage 2 of 3)...
| 0 percent completed.
| 1 percent completed.
| 2 percent completed.
| 3 percent completed.
| [...]
| 97 percent completed.
| 98 percent completed.
| 99 percent completed.
| 100 percent completed.
| Index verification completed.
| CHKDSK is verifying security descriptors (stage 3 of 3)...
| Repairing the security file record segment.
| Deleting an index entry with Id 256 from index $SII of file 9.
| Deleting an index entry with Id 257 from index $SII of file 9.
| Deleting an index entry with Id 259 from index $SII of file 9.
| [...]
| Deleting an index entry with Id 436 from index $SDH of file 9.
| Deleting an index entry with Id 406 from index $SDH of file 9.
| Deleting an index entry with Id 435 from index $SDH of file 9.
| 0 percent completed.
| Replacing invalid security id with default security id for file 11.
| Replacing invalid security id with default security id for file 29.
| Replacing invalid security id with default security id for file 43.
| 0 percent completed.
| Security descriptor verification completed.
| CHKDSK is verifying Usn Journal...
| Repairing Usn Journal file record segment.
| Usn Journal verification completed.
| CHKDSK discovered free space marked as allocated in the
| master file table (MFT) bitmap.
| Correcting errors in the Volume Bitmap.
| Windows has made corrections to the file system.
|
| 78148160 KB total disk space.
| 42498444 KB in 31285 files.
| 11004 KB in 2743 indexes.
| 0 KB in bad sectors.
| 172730 KB in use by the system.
| 65536 KB occupied by the log file.
| 35465981 KB available on disk.
|
| 512 bytes in each allocation unit.
| 156296321 total allocation units on disk.
| 70931963 allocation units available on disk.
| +++
|

This is NOT a Registry problem. If you are going to Cross-Post make sure the post is
relevant and On Topic to ALL News Groups it is Cross-Posted to.

Go to the hard disk manufacturer's web site and download their diagnostic software
respective to your hard disk. After the test, you will know if the hard disk is bad or
not..

Quantum/Maxtor - PowerMax
http://www.maxtor.com/en/support/downloads/powermax.htm

Western Digital - Data LifeGuard Tools (DLGDiag)
http://support.wdc.com/download/

Hitachi/IBM - Drive Fitness Test (DFT)
http://www.hgst.com/hdd/support/download.htm

Seagate - SeaTools
http://www.seagate.com/support/seatools/

Fujitsu - Diagnostic Tool
http://www.fcpa.com/download/hard-drives/

Samsung - Disk manager
http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

 

[Bob]

This is NOT a Registry problem.

Actually there is evidence that it is.

If you are going to Cross-Post make sure the post is
relevant and On Topic to ALL News Groups it is Cross-Posted to.

If you are going to bitch, make sure you know what you are talking
about.

Go to the hard disk manufacturer's web site and download their diagnostic software
respective to your hard disk. After the test, you will know if the hard disk is bad or
not.

No shit.

The disks are not bad. I have run every known diagnostic on them and
they come up 100% clean.


--

"One must realize that the world is a network of real and virtual
combat zones where the stakes are high, struggle is the primary
mode of being and only total victory is acceptable.
-- Sun Tzu, "The Art Of War"

 

[David H. Lipman]

From: "Bob" <[email protected]>

| On Tue, 15 Aug 2006 16:38:02 -0400, "David H. Lipman"
|
| Actually there is evidence that it is.
||
| If you are going to bitch, make sure you know what you are talking
| about.
||
| No shit.
|
| The disks are not bad. I have run every known diagnostic on them and
| they come up 100% clean.
|

< PLONK > !

 

[Bob]

< PLONK > !

How juvenile.


--

"One must realize that the world is a network of real and virtual
combat zones where the stakes are high, struggle is the primary
mode of being and only total victory is acceptable.
-- Sun Tzu, "The Art Of War"

 

[shura]

Here is the output of CHKDSK. Please suggest some things I can do to
fix this nuisance problem.

+++
The type of the file system is NTFS.
Volume label is System.

CHKDSK is verifying files (stage 1 of 3)...
0 percent completed.
Deleted corrupt attribute list entry
with type code 128 in file 9.
Deleting corrupt attribute record (128, $SDS)

These messages mean that file $Secure (number 9) becames too fragmented.
I don't know why NTFS driver (?) creates invalid attribute list for this
file.
When chkdsk deletes attribute 0x80 $SDS then all securities are deleted
and each reference to these security became invalid too.
Each file has reference to security placed in attribute 0x80 : $SDS.
chkdsk creates a default security and fixes all invalid references.

I think that you should defragment volume to make easy to extend file
$Secure

 

[Bob]

These messages mean that file $Secure (number 9) becames too fragmented.
I don't know why NTFS driver (?) creates invalid attribute list for this
file.
When chkdsk deletes attribute 0x80 $SDS then all securities are deleted
and each reference to these security became invalid too.
Each file has reference to security placed in attribute 0x80 : $SDS.
chkdsk creates a default security and fixes all invalid references.

I think that you should defragment volume to make easy to extend file
$Secure

I have used the Win2K defrag but it doesn't help. Sometimes it
actually corrupts a disk that was not corrupt on startup.


--

"One must realize that the world is a network of real and virtual
combat zones where the stakes are high, struggle is the primary
mode of being and only total victory is acceptable.
-- Sun Tzu, "The Art Of War"

 

[Bob]

These messages mean that file $Secure (number 9) becames too fragmented.
I don't know why NTFS driver (?) creates invalid attribute list for this
file.

When chkdsk deletes attribute 0x80 $SDS then all securities are deleted
and each reference to these security became invalid too.
Each file has reference to security placed in attribute 0x80 : $SDS.
chkdsk creates a default security and fixes all invalid references.

I think that you should defragment volume to make easy to extend file
$Secure

Another thing I should mention is that everytime I reboot, I get the
following error message in Event Viewer under Applications:

+++
Event Type: Warning
Event Source: SysmonLog
Event Category: None
Event ID: 2006
Date: 8/21/2006
Time: 4:54:17 AM
Description:
Unable to read the Log File Folder value of the System Overview log or
alert configuration. The default value will be used. The error code
returned is in the data.
Data:
0000: 02 00 00 00 ....
+++

What is causing this and how do I fix it?

 

[MicroSoft]

From: "Bob" <[email protected]>

| I am running Win2K/SP4. I have the boot disk in a removable bay so I
| can clone and swap for backup and archive. What I will describe
| applies to all three WD 80GB Caviar disks.
|
| Sometimes when I reboot the machine, I get a blue screen which forces
| me to mount the corrupt disk in D: and run CHKDSK D: /f. That has
| always cleaned up the disk so I can continue to boot from it.
|
| Here is the output of CHKDSK. Please suggest some things I can do to
| fix this nuisance problem.
|
| +++
| The type of the file system is NTFS.
| Volume label is System.
|
| CHKDSK is verifying files (stage 1 of 3)...
| 0 percent completed.
| Deleted corrupt attribute list entry
| with type code 128 in file 9.
| Deleting corrupt attribute record (128, $SDS)
| from file record segment 10251.
| 1 percent completed.
| 2 percent completed.
| 3 percent completed.
| [...]
| 97 percent completed.
| 98 percent completed.
| 99 percent completed.
| 100 percent completed.
| File verification completed.
| Correcting cross-link for file 6729.
| CHKDSK is verifying indexes (stage 2 of 3)...
| 0 percent completed.
| 1 percent completed.
| 2 percent completed.
| 3 percent completed.
| [...]
| 97 percent completed.
| 98 percent completed.
| 99 percent completed.
| 100 percent completed.
| Index verification completed.
| CHKDSK is verifying security descriptors (stage 3 of 3)...
| Repairing the security file record segment.
| Deleting an index entry with Id 256 from index $SII of file 9.
| Deleting an index entry with Id 257 from index $SII of file 9.
| Deleting an index entry with Id 259 from index $SII of file 9.
| [...]
| Deleting an index entry with Id 436 from index $SDH of file 9.
| Deleting an index entry with Id 406 from index $SDH of file 9.
| Deleting an index entry with Id 435 from index $SDH of file 9.
| 0 percent completed.
| Replacing invalid security id with default security id for file 11.
| Replacing invalid security id with default security id for file 29.
| Replacing invalid security id with default security id for file 43.
| 0 percent completed.
| Security descriptor verification completed.
| CHKDSK is verifying Usn Journal...
| Repairing Usn Journal file record segment.
| Usn Journal verification completed.
| CHKDSK discovered free space marked as allocated in the
| master file table (MFT) bitmap.
| Correcting errors in the Volume Bitmap.
| Windows has made corrections to the file system.
|
| 78148160 KB total disk space.
| 42498444 KB in 31285 files.
| 11004 KB in 2743 indexes.
| 0 KB in bad sectors.
| 172730 KB in use by the system.
| 65536 KB occupied by the log file.
| 35465981 KB available on disk.
|
| 512 bytes in each allocation unit.
| 156296321 total allocation units on disk.
| 70931963 allocation units available on disk.
| +++
|

This is NOT a Registry problem. If you are going to Cross-Post make sure the post is
relevant and On Topic to ALL News Groups it is Cross-Posted to.

Go to the hard disk manufacturer's web site and download their diagnostic software
respective to your hard disk. After the test, you will know if the hard disk is bad or
not..

Quantum/Maxtor - PowerMax
http://www.maxtor.com/en/support/downloads/powermax.htm

Western Digital - Data LifeGuard Tools (DLGDiag)
http://support.wdc.com/download/

Hitachi/IBM - Drive Fitness Test (DFT)
http://www.hgst.com/hdd/support/download.htm

Seagate - SeaTools
http://www.seagate.com/support/seatools/

Fujitsu - Diagnostic Tool
http://www.fcpa.com/download/hard-drives/

Samsung - Disk manager
http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

I'd rather see crossposts than multi posts; relax, have a sip.