No sounds on Vista.

[news.microsoft.com]

Sounds are turned on in Vista yet they don't play. What setting could I
have missed and what can cause sounds to stop playing? The speakers work
fine. All connections are secure. The little speaker icon is also missing
from the taskbar.
How can I get that back? TIA.......

 

[david manvell]

Hello,

Have you installed your audio drivers?

Also check in the Taskbar properties in the tutorial below to make sure
that you have the "Volume" icon checked to enable it, then make sure
that the volume is not muted and that the volume level is up high enough
to hear it.

'Notification Area - System Icons'
(http://www.vistax64.com/tutorials/106787-notification-area-system-icons.html)

Hope this helps,
Shawn





--
Brink

*There are no dumb questions, just the people that do not ask
them.*
'*VISTA FORUMS*' (http://www.vistax64.com)
*Please post feedback to help others.*

Also look in your device manager and see if under the Sound card section if
any of the devices there have any warnings (Yellow or red flag). that could
indicate a defective sound card or a driver problem.

Also if you have a sound card, make sure your speakers are plugged directly
into it and not into your computers internal sound jack. If you do have a
sound card and you recently installed it (And this problem occurred) you may
have to go into your bios and turn off the computers internal sound card (If
one exists).

 

[news.microsoft.com]

Also look in your device manager and see if under the Sound card section
if
any of the devices there have any warnings (Yellow or red flag). that
could
indicate a defective sound card or a driver problem.

Also if you have a sound card, make sure your speakers are plugged
directly
into it and not into your computers internal sound jack. If you do have a
sound card and you recently installed it (And this problem occurred) you
may
have to go into your bios and turn off the computers internal sound card
(If
one exists).

No problem could be found. A system-restore fixed it. I'm not picking on MS
but it seems many of these problems started after a large download of
"updates." I did a restore from before those updates and that solved most
of the "issues."

 

[Mick Murphy]

No problem could be found. A system-restore fixed it. I'm not picking on MS
but it seems many of these problems started after a large download of
"updates." I did a restore from before those updates and that solved most
of the "issues."

Now you just have to solve the "issue" of the dumbass f*cking user.

 

[news.microsoft.com]

You may have had one the updates get corrupted during installation. I'm
happy to hear that most of your issues have been resolved so far.

You might also run a "sfc /scannow" (no quotes) command to see if it
can find and fix any bad system files. This tutorial will show you how
to if needed.

http://www.vistax64.com/tutorials/66978-system-files-sfc-command.html

Yep, it did. :^)