Hi and thanks for you reply.
I'm believe I'm just using the winXp network config.
It detects the networks fine and can send data to them, but not receive. I
then need to goto the wireless network connection properties to edit the
tcp/ip settings.
With the work network I need to specify a specific IP address. However this
then does not work for my home network. At this point I need o change it to
automatically detect an IP.
When I go back into work, into cannot connect to the network at all (send or
receive) until I manually enter the IP / Gateway / submet / dns, etc.. again.
Hope that helps.
Thanks
Yes, that helps. I thought that you meant that you had to change
settings that are specific to wireless networking, like the type of
encryption or the encryption key. Now I see that you're changing
TCP/IP settings. Here are two possible solutions:
1. Configure the network connection's TCP/IP settings to obtain an IP
address automatically, which it will do at home. Click the Alternate
Configuration tab and enter the IP address and other settings for
work.
or:
2. Use one of these programs, which let you store multiple network
configurations and switch between them easily:
NetSwitcher
http://www.netswitcher.com
MultiNetwork Manager
http://www.globesoft.com/mnm_home.html
Mobile Net Switch
http://www.mobilenetswitch.com
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)
Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.
Microsoft Most Valuable Professional Program
http://mvp.support.microsoft.com