Multiple incoming path to a single PPTP server

K

KL Wong

Dont know if this is possible.

I got 2 internet connection into my network, both connection has got a
firewall configured supporting PPTP. As my internal PPTP server can
only have one gateway configured (i.e. either one of the 2 firewall),
as a result, client can only access the PPTP through one path.

Are there any way to configure the PPTP server such that it can tell
which path the PPTP client is coming from in order to route back to
the correct internet connection ??

B.Rgds/KL
 
B

Bill Grant

Not really. There is no way to know what "real" IP address the calling
client is using, so you need to use default routing to get the encrypted and
encapsulated packets out to the Internet. When the packet leaves the RRAS
server it has the remote client's "real" public IP as the destination.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

only 1 pptp outgoing connection works - if 2 then one connection drops ? 2
outgoing pptp error 800 and 721 1
Routing to multiple networks behind 2003 PPTP server? 4
server to server pptp (1 nic per server) (server is dc) 7
allocate specific range of IPs to incoming pptp on 2003 ? 2
pptp win2k sp4 error 650 and 721 2
PPTP Pass through for VPN not on RRAS 3
not all pptp ports display in registry path (KB 271731) error 721 3

Top