multi-homed routing

G

Guest

I have a Vista Ultimate PC with 2 NIC's on 2 seperate networks. 192.168.10.0
and 20.0.

How can I set up routing between these two networks through the Vista PC?
 
R

Robert L \(MS-MVP\)

You may try enable IP routing. This post may help too.

Setup Vista as routerLegrandin The Vista is not designed as router. However,
you may try it by enabling the IP routing. The following links may help, How
to setup XP as a router ...
www.chicagotech.net/netforums/viewtopic.php?p=2312&sid=d9bed141ba658e4f453e48a3bd57b941


--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Two NICs with identical gateway metric 4
windows vista with 2 nic and 2 lan 3
Routing and remote access service can't start 5
WiFi Card will not find networks when > 2GB RAM 10
Wireless Network Reconnection 3
RAS Create New Inbound Connnection 1
re-establishing a network 3
wireless network setup 3

Top