modem

[guidi fabio]

i try to install modem directly after fba on xpe
installation success query modem is very slow but work,
modem dial not work

 

[Heidi Linda eMVP]

Is this still your USB modem?

 

[Andrea De Nardis]

Hi Heidi,
it is still the same modem and I really do not know how to make it run.
I tried all the hints you suggested me and none of them worked. I am almost
crying!!!

 

[Heidi Linda eMVP]

OK, well once I've got the new Vampire build done, you can try installing on
that and see whether it works or not.

 

[Guest]

you wrote me
The error you reported before was 674, which was to do
with not being able to read the speed from the .inf file,
which sounds very likely to be responsible for your
problem.
Whether this was the error or not, you have two
possibilities - your driver is broken, or your driver has
dependencies you don't know about.
I would suggest you install the driver normally on the Xpe
image. If this corrects the problem, then you know your
driver component is at fault, and I suggest you use inctrl
5 (available from xpefiles.com) to track the installation
on an XPPro system and create a new component from this
information.
If you cannot install the driver, please report what
problems you have *in this thread* and we'll try to get
you sorted out.
If installing the driver works, but you still have the
same problems, then you know you are missing a dependency
somewhere.
i install direct modem after fba install success but modem work bad it is slow connect to 296bps this value is indicate tfrom compuetr that receive the call, at this moment i think that any component for modem usb aren't in my list it is possible have
the complete list of component for modem usb configuration

 

[Heidi Linda eMVP]

The easiest way to find out if this *is* a dependency issue is to use the
vampire build which I'm in the process of redoing. I have to do this on my
own time, as I actually do have work to do while at work. However, at the
moment I also have a rush sewing job on, and as I'm getting paid for that,
I'm afraid it gets most of my time.

you wrote me
The error you reported before was 674, which was to do
with not being able to read the speed from the .inf file,
which sounds very likely to be responsible for your
problem.
Whether this was the error or not, you have two
possibilities - your driver is broken, or your driver has
dependencies you don't know about.
I would suggest you install the driver normally on the Xpe
image. If this corrects the problem, then you know your
driver component is at fault, and I suggest you use inctrl
5 (available from xpefiles.com) to track the installation
on an XPPro system and create a new component from this
information.
If you cannot install the driver, please report what
problems you have *in this thread* and we'll try to get
you sorted out.
If installing the driver works, but you still have the
same problems, then you know you are missing a dependency
somewhere.
i install direct modem after fba install success but modem work bad it is

slow connect to 296bps this value is indicate tfrom compuetr that receive
the call, at this moment i think that any component for modem usb aren't in
my list it is possible have