T
tinklemagoo
Installed M848A v2.1 board +2400cpu and it has been running stable for 2
days no bsod/freezing i downloaded latest MBM v5.3.5.0 and used the config
wizard.
Once mbm was installed and setup the readings for almost all voltages and
temps are totally crazy (even after i manually checked mbm website for
specific temp sensors/diodes for the m848a board).
The only temp i can get accurately is Sis950/ITE8705F-1 Diode which is
always same reading as the: BIOS-Hardware Monitor Page-CPU Temperature so
the cpu temp sensor (Sis950/ITE8705F-1 Diode) is correct? And also the CPU
Fan which has identical reading in BIOS-Hardware Monitor Page-CPU Fan Speed.
So the only two accurate readings MBM gives me are the CPU temp and Fan
speed which are same as Bios readings!
Does this mean board is faulty or is MBM not really that accurate?
days no bsod/freezing i downloaded latest MBM v5.3.5.0 and used the config
wizard.
Once mbm was installed and setup the readings for almost all voltages and
temps are totally crazy (even after i manually checked mbm website for
specific temp sensors/diodes for the m848a board).
The only temp i can get accurately is Sis950/ITE8705F-1 Diode which is
always same reading as the: BIOS-Hardware Monitor Page-CPU Temperature so
the cpu temp sensor (Sis950/ITE8705F-1 Diode) is correct? And also the CPU
Fan which has identical reading in BIOS-Hardware Monitor Page-CPU Fan Speed.
So the only two accurate readings MBM gives me are the CPU temp and Fan
speed which are same as Bios readings!
Does this mean board is faulty or is MBM not really that accurate?