OM,
As an previous owner of a Lexmark 1100 Jet Printer and a current owner of a Lexmark X73 All-in-One. I would not recommend that you purchase a Lexmark product, This includes a Dell rebadged Lexmark unit. I believe these are Dell's 7XX series.
My personal objection to my purchase of this particular brand is the cost of replacement ink cartridges. You said that you have found an all-in-one for £35.00 (approx. $61.52USD). If your unit contains two (2) cartridges, the cost for a replacement set of them will be approximately £34.13-£45.51 ($60.00-$80.00USD) plus tax and VAT charges. So the cost of replacement of the ink carts, is the equivalent to purchasing a new printer. Which is the reason that my all-in-one has been is only being used as a scanner. I have purchased a Canon jet printer for my printing jobs, because of the cost of replacement cartridges.
Now there are bulk ink refill kits for Lexmark, and seemed to be reasonably priced. I just have not been able to use them myself. It might be simply that I let the cartridge dry out, and the form inside won't properly absorb the new ink, to work right. Or I overfilled the color carts, causing cross contamination. But many others have been successful. But my understanding is that even with the best bulk ink, the cartridges themselves will wear out in time, so you will still have to buy the replacement carts, every once in a while.
If you are considering purchasing an all-in-one printer, and have a home/small business network, make sure that you get one that is capable of being used on a network. I know that Brother has some, that will work on a network. If not, you might need to purchase additional hardware, such as a print server.
--
Rich/rerat
(RRR News) <message rule>
<<Previous Text Snipped to Save Bandwidth When Appropriate>>
I'd like a few comments about Lexmark printers.
£35 for an all in one printer. Yikes, I'll go and buy 500 of them.
: )
Erm... hold on... I have bad memories of Lexmark.
Printing: very dismal.
If you're patient though and are willing to wait 5 hours between each
print to allow for drying... then it's OK.
(Also... printing at best quality, if you've got 20 hours... then fine,
go for it.)
This was going a few years now.
Have they improved??
Any feedback would be appreciated.
Thanks.
OM