Is it possible to disable OEM INK warning on Epson printer driver 5.5aA ?

[Te]

Is it possible to disable the non-epson / oem ink warning on the newest
Epson R300M printer driver? v 5.5aA ?

This latest version gives me a popup everytime I print, saying the
cartridges installed are NOT epson carts, and I must manually press ok to
continue printing... Makes it impossible to print multiple copies without
user intervention!

HELP

 

[Kaiser]

Is it possible to disable the non-epson / oem ink warning on the newest
Epson R300M printer driver? v 5.5aA ?

This latest version gives me a popup everytime I print, saying the
cartridges installed are NOT epson carts, and I must manually press ok to
continue printing... Makes it impossible to print multiple copies without
user intervention!

HELP

On some of the latest Epson printers you can uninstall the Status Monitor
Software and just leave the driver installed, that will stop the popup.

The only problem with doing this is that you will need to monitor your ink
usage using the LCD display on the printer or install the SSC printer
utility from the following site.

http://www.ssclg.com/epsone.shtml

 

[Rus]

Is it possible to disable the non-epson / oem ink warning on the
newest Epson R300M printer driver? v 5.5aA ?

This latest version gives me a popup everytime I print, saying the
cartridges installed are NOT epson carts, and I must manually press ok
to continue printing... Makes it impossible to print multiple copies
without user intervention!

HELP

I hate to hear that Epson is doing that. I just ran to the Epson site
to nab older copies of drivers for my Epson's.

Hope someone finds a way to kill that nag action. Some day I'll need
another Epson.

In the meantime, if I find a way to kill the nag, I'll post here.

BTW, have you poked around in the registry to see if there's something
easily modified there? Or, maybe in an Epson *.inf?

//rus//

 

[Te]

I hate to hear that Epson is doing that. I just ran to the Epson site
to nab older copies of drivers for my Epson's.

Hope someone finds a way to kill that nag action. Some day I'll need
another Epson.

In the meantime, if I find a way to kill the nag, I'll post here.

BTW, have you poked around in the registry to see if there's something
easily modified there? Or, maybe in an Epson *.inf?

//rus//

I have not... since I don't know what I'm looking for- I'd be afraid to
alter something I'm not supposed to.

You mention getting the older versions of the drivers, where would I be able
to find the older (pre v5.5aA) versions of my drivers for the R300M ?

 

[Te]

On some of the latest Epson printers you can uninstall the Status Monitor
Software and just leave the driver installed, that will stop the popup.

The only problem with doing this is that you will need to monitor your ink
usage using the LCD display on the printer or install the SSC printer
utility from the following site.

http://www.ssclg.com/epsone.shtml

I tried to disable the status monitor - which if I'm correct, is the small
icon in the system tray.. I did so successfully using start->run->msconfig
and disabling it from startup items, however, the nag screen still appeared
when I tried to print.

 

[Kaiser]

I tried to disable the status monitor - which if I'm correct, is the small
icon in the system tray.. I did so successfully using start->run->msconfig
and disabling it from startup items, however, the nag screen still
appeared
when I tried to print.

I said uninstall, not disable.

 

[Kaiser]

I said uninstall, not disable.

I have already done this exercise on a CX6400 using V5.5a driver, and by
uninstalling the status monitor it no longer gives the popup message. If you
go to add & remove programs in the control panel select the epson driver,
you can then deselect the driver and select the status monitor tab to remove
that only.

 

[Rus]

I have already done this exercise on a CX6400 using V5.5a driver, and
by uninstalling the status monitor it no longer gives the popup
message. If you go to add & remove programs in the control panel
select the epson driver, you can then deselect the driver and select
the status monitor tab to remove that only.

Interesting. I'm using a new driver 5.5a for my C86. It only nags one
time when I install a new 3rd party cartridge. It doesn't nag with each
print job as Te has said.

I wonder if, perhaps, it's only certain brands of 3rd party cartridges
that bring up this nag with each print job?

//rus//

 

[Rus]

I have not... since I don't know what I'm looking for- I'd be afraid
to alter something I'm not supposed to.

You mention getting the older versions of the drivers, where would I
be able to find the older (pre v5.5aA) versions of my drivers for the
R300M ?

Hmmm. You said that you "had troubles" and therefore had to install the
latest driver. That indicates to me that you might have had the older
driver installed in the first place. No? If you had originally
installed the older version, wouldn't you be able to find the old version
on your installer CD-ROM?

Anyway ...

It's still on the Epson FTP (File Transfer Protocol) site. They bundle
the drivers in self-extracting zipped files with a randomly assigned
numerical name. It's hard to discover which of the hundreds of files are
yours without a tool because the file names don't give a clue.

Go to http://www.versiontracker.com and click around. Click on
"Windows." Go to the drop-down box where it says: "Jump to." Choose
"Drivers." Search for the R300. If they have a listing, there may be
several listings. Each of the links at VersionTracker.com will probably
be a link to the Epson FTP site.

If you can't find an older version there, go to http://www.download.com
and search there.

And ... of course ... there's always Google. Google knows everything !!

//rus//

 

[KM]

Just tried the latest driver 5.5bAs from the Epson site and tehre i
no popup message. I do have the monitor tray icon disabled but thi
wasn't generating the message anyway. I like the SSC Service Utilit
better than the Epson tray utility

 

[KM]

The driver that shipped with my R300 is 5.57E and there is no optio
to uninstall the ststus monitor and leave only the drivers. I hav
deleted different reg entries and status monitor files in an attemp
to get around the ink warning but no luck so far