IPSec Help Requested

Y

Yogi_Bear_79

I use the built-in IP filtering in the Windows XP OS. I have had great
success blocking nuisance IPs from connecting to my web server.

I built an FTP server that I want to block all incoming access to, then
allow a couple of specific IPs. It appears that I can only have one security
policy assigned at a time, so I added the block all statement to my
webserver ACL filter list

Any IP, My IP, TCP, Port 21, Inbound.

Yet I can still connect from an outside source. I can't see what I Did wrong
as the other blocks are working, the only difference is on this one I
specified the protocol, and the port.
 
S

Steven L Umbach

Sometimes I have seen where you need to reboot to have changes in an ipsec
policy apply. You can use the mmc snapins for Ip Security to make sure that
your ipsec policy shows your filters as you have them configured. ---
Steve
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

missing IPsec option 4
command not working to get netsh to block a single IP 0
Deny Specific Incomming IP to Webserver 6
IPSEC not blocking specific IP address per Ethereal 13
IPSec on webserver 3
Help needed on Setting permissions for FTP 1
Port filtering with IPSEC 1
problem blocking external ip with ipsec, only local ips get blocked? 3

Top