N
needlove
My computer is not part of a network! I am the ADMINISTRATOR. I installed
Windows XP home sp1 OEM CD I got off ebay. I installed it on a WD raptor
serial ATA hard drive using an ATA CD drive and installed the unsigned
Sil3112 SATA drivers when prompted. I installed SP2 before accessing the
internet to download the latest updates. The repair installations, one from
the recovery console, one from an active windows session, were done using a
"slipstream CD" (merging sp2 with my original sp1 version).
This is my sceRoot log for all installations:
Saturday, February 19, 2005 9:29:26 PM
C:\ is a NTFS volume.
Security for C:\ is not changed because it is not the default set by
Windows. The current security is
D
A;OICI;FA;;;BA)(A;OICI;FA;;;SY)(A;OICIIO;GA;;;CO)(A;OICI;0x1200a9;;;BU)(A;CI;LC;;;BU)(A;CIIO;DC;;;BU)(A;;0x1200a9;;;WD).
First attempted repair!
Thursday, July 07, 2005 2:36:55 PM
C:\ is a NTFS volume.
Security for C:\ is not changed because it is not the default set by
Windows. The current security is
DA;OICI;FA;;;BA)(A;OICI;FA;;;SY)(A;OICIIO;GA;;;CO)(A;OICI;0x1200a9;;;BU)(A;CI;LC;;;BU)(A;CIIO;DC;;;BU)(A;;0x1200a9;;;WD).
Second attempted repair!
Sunday, July 17, 2005 5:51:32 PM
C:\ is a NTFS volume.
Security for C:\ is not changed because it is not the default set by
Windows. The current security is
DA;OICI;FA;;;BA)(A;OICI;FA;;;SY)(A;OICIIO;GA;;;CO)(A;OICI;0x1200a9;;;BU)(A;CI;LC;;;BU)(A;CIIO;DC;;;BU)(A;;0x1200a9;;;WD).
Do you see anything wrong with this? Compare it to your sceRoot log please.
I cannot make changes to RPCSS! I tried from CMD.exe, safe mode
administrator account and unable to access it through MMC or component
services. I can't even access the help file to editing security templates!
RPCSS is run by NTAUTHORITY/SYSTEM and and when I tried to change it to
local account it locked itself up. WMI, DTC, Help and Support, to name a
few, can't comunicate with it but its running by golly!
Here is my most recent setuperr log:
Error:
Setup encountered an error while trying to set system security.
An extended error has occurred.
Error:
Setup could not register the OLE Control C:\WINDOWS\system32\swprv.dll
because of the following error:
DllInstall returned error 2147549183 (8000ffff).
I ran regsvr32 swprv.dll (VSCs) and it registered ok.
I have tons of log files which ones would you need to make a diagnosis?
Windows XP home sp1 OEM CD I got off ebay. I installed it on a WD raptor
serial ATA hard drive using an ATA CD drive and installed the unsigned
Sil3112 SATA drivers when prompted. I installed SP2 before accessing the
internet to download the latest updates. The repair installations, one from
the recovery console, one from an active windows session, were done using a
"slipstream CD" (merging sp2 with my original sp1 version).
This is my sceRoot log for all installations:
Saturday, February 19, 2005 9:29:26 PM
C:\ is a NTFS volume.
Security for C:\ is not changed because it is not the default set by
Windows. The current security is
D
A;OICI;FA;;;BA)(A;OICI;FA;;;SY)(A;OICIIO;GA;;;CO)(A;OICI;0x1200a9;;;BU)(A;CI;LC;;;BU)(A;CIIO;DC;;;BU)(A;;0x1200a9;;;WD).First attempted repair!
Thursday, July 07, 2005 2:36:55 PM
C:\ is a NTFS volume.
Security for C:\ is not changed because it is not the default set by
Windows. The current security is
D
A;OICI;FA;;;BA)(A;OICI;FA;;;SY)(A;OICIIO;GA;;;CO)(A;OICI;0x1200a9;;;BU)(A;CI;LC;;;BU)(A;CIIO;DC;;;BU)(A;;0x1200a9;;;WD).Second attempted repair!
Sunday, July 17, 2005 5:51:32 PM
C:\ is a NTFS volume.
Security for C:\ is not changed because it is not the default set by
Windows. The current security is
D
A;OICI;FA;;;BA)(A;OICI;FA;;;SY)(A;OICIIO;GA;;;CO)(A;OICI;0x1200a9;;;BU)(A;CI;LC;;;BU)(A;CIIO;DC;;;BU)(A;;0x1200a9;;;WD).Do you see anything wrong with this? Compare it to your sceRoot log please.
I cannot make changes to RPCSS! I tried from CMD.exe, safe mode
administrator account and unable to access it through MMC or component
services. I can't even access the help file to editing security templates!
RPCSS is run by NTAUTHORITY/SYSTEM and and when I tried to change it to
local account it locked itself up. WMI, DTC, Help and Support, to name a
few, can't comunicate with it but its running by golly!
Here is my most recent setuperr log:
Error:
Setup encountered an error while trying to set system security.
An extended error has occurred.
Error:
Setup could not register the OLE Control C:\WINDOWS\system32\swprv.dll
because of the following error:
DllInstall returned error 2147549183 (8000ffff).
I ran regsvr32 swprv.dll (VSCs) and it registered ok.
I have tons of log files which ones would you need to make a diagnosis?