install hurdle

[Guest]

When I try to install Vista from recordable dvd I get an error code 80070017
and install fails...Frustration is close to causing temper tantrums!!!

 

[Andre Da Costa [Extended64]]

try reburning the ISO at a low speed, 2x recommended, also do a CRC check on
the ISO to find out its integrity. Nero MD5 Verifier is a recommended
choice. If setup still fails, its likely a bad download.

I use the one from Ahead Nero
http://ww2.nero.com/nero6/eng/Nero_MD5_Verifier.html

Here are the MD5/CRC values for x86 or x64 depending on which every ISO you
downloaded:

x86
- File Size = 3.12 GB (3,355,598,848 bytes)
- CRC Value = 0x67E089E0
- MD5 Value = 0E733AB1A8E8FF9A8684FD3639332773
x64
- File Size = 4.01 GB (4,309,368,832 bytes)
- CRC Value = 0x48697711
- MD5 Value = E43502D0A15EADD551119D5639859E04

Paste the MD5 Checksum for either x64 or x86 depending on which one you want
check in Step 1, Step 2 - Browse to where you stored the ISO on your drive
and open it and it will automatically start the varification process and
generate the has in the third field, if it matches Step 1, then you are
safe.
--
--
Andre
Windows Connected | http://www.windowsconnected.com
Extended64 | http://www.extended64.com
Blog | http://www.extended64.com/blogs/andre
http://spaces.msn.com/members/adacosta

 

[Guest]

I finally found a good solution! No dvd needed!

I had the same problem(error 80070017) at first but I tried a different way
and it worked.

All you have to do is download a .iso extracter from "www.download.com". The
program is called UltraISO(just search for it). Even though its a trial
version, it still works. After you download and install the UltraISO. Go to
File>Open and open the .iso file into it and extract the file into a folder.
After you do that, click on setup and it will work.

 

[Guest]

Try This: Burn the ISO Image in 1X or 2X of Speed / Change the DVD+ To DVD- /
If don't works try to download a new Image, Goodlook