HD Specs?

B

bealoid

Do you have any hints and tips for people looking to buy a new hard
drive? (I'd like to buy a new ATA/IDE drive for a machine running
Windows 2000, with an ABIT NF7 motherboard.)

What are the important specs to be checking?

I can buy these for about £30ukp:
ExcelStor Technology 80GB 7200rpm 2MB U100
ExcelStor Technology 80GB 7200rpm 8MB S300
Samsung 80GB U133 7200RPM 2MB

So what's the difference between U100, U133 and S300, and will I notice
that difference?

Is ExcelStor a reasonable make, or are they dogs?

This motherboard doesn't have SATA connectors, so I won't be buying those.
 
F

Folkert Rienstra

bealoid said:
Do you have any hints and tips for people looking to buy a new hard
drive? (I'd like to buy a new ATA/IDE drive for a machine running
Windows 2000, with an ABIT NF7 motherboard.)

What are the important specs to be checking?

Warranty? (And how to get it when you need it).
I can buy these for about £30ukp:
ExcelStor Technology 80GB 7200rpm 2MB U100
ExcelStor Technology 80GB 7200rpm 8MB S300
Samsung 80GB U133 7200RPM 2MB
So what's the difference between U100, U133 and S300, and will I notice
that difference?
Is ExcelStor a reasonable make, or are they dogs?

Google offline again?
This motherboard doesn't have SATA connectors, so I won't be buying those.

So there goes the S300 off the list.
 
A

Arno Wagner

Previously bealoid said:
Do you have any hints and tips for people looking to buy a new hard
drive? (I'd like to buy a new ATA/IDE drive for a machine running
Windows 2000, with an ABIT NF7 motherboard.)
What are the important specs to be checking?
I can buy these for about £30ukp:
ExcelStor Technology 80GB 7200rpm 2MB U100
ExcelStor Technology 80GB 7200rpm 8MB S300
Samsung 80GB U133 7200RPM 2MB
So what's the difference between U100, U133 and

Basdically the same....
S300, and will I notice
that difference?

Entierly differnt connector and interface. Needs an
SATA connecotr. No speed difference in practice.
Is ExcelStor a reasonable make, or are they dogs?

According to Odie, they are rabid dogs with Cholera...
Nobody seems to really disagree about this, so better
stay away. Especially since Samsung is pretty good.
This motherboard doesn't have SATA connectors, so
I won't be buying those.

Then don't ;-)

Arno
 
F

Folkert Rienstra

Arno Wagner said:
Basdically the same....


Entierly differnt connector and interface. Needs an
SATA connecotr. No speed difference in practice.
According to Odie, they are rabid dogs with Cholera...

See, ask a stupid question and you are bound to get stupid
answers from the resident babblebots.

Actually, Excelstor produce some of the smaller drives for Hitachi.
Hitachi, which according to Odoriferous (yes, that's Odie)
are very good, about the best there is, even.
Excelstor also sell some of these drives under their own label.
Nobody seems to really disagree about this,

That is those that are not in babblebot's killfile, that is.
Which makes him often repeat his usual stupidity because
he stuck his head in the sand at the time he was corrected.
 
O

Odie Ferrous

Folkert said:
See, ask a stupid question and you are bound to get stupid
answers from the resident babblebots.

Actually, Excelstor produce some of the smaller drives for Hitachi.
Hitachi, which according to Odoriferous (yes, that's Odie)
are very good, about the best there is, even.
Excelstor also sell some of these drives under their own label.

Within certain parameters, yes.

And, similarly, there are Seagate models I cannot recommend.

Although Excelstor produce drives for Hitachi, they are also reknowned
(to me, anyhow - you don't have the knowledhe or foresight) for
producing drives that have been "cut" (you probably wouldn't understand,
Folkert) and relabelled as new, working stock. Would you trust that? I
wouldn't.



Odie
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads


Top