G
Guest
Help!!!
I have what seems to be a very common problem - my Sony DCR TRV22 DV
camcorder is no longer recognized at all via Firewire by Windows since
installing XP SP2.
I have 2 systems with the same issue:
AMD 2600+
Asus MB nVidia nForce 2 chipset
Soundblaster Audigy 2 Platinum with Firewire &
Windows XP upgraded to SP2 from SP1
iDEQ SFF PC w/ built in Firewire
Celeron 2.4 GHz
Windows Media Center Edition 2005 (which comes with SP2)
Here's what I've done:
1)Bought a new firewire cable (before I realized it's definitely an SP2 issue)
2)Various Spyware/Virus scans (which I do anyway - BTW MS AntiSpyware Beta
is awesome for getting rid of that IST bar)
3)Tried my friend's identical DCR TRV22 - same issue
4)Replaced my SP2 IEEE 1394 files with SP1 as per previous posts
5)My Firewall is completely OFF
6)Re-booted with my camera connected and ON
7)My IEEE 1394 Controller is seen by Windows as working properly
I have some footage I must get over onto DVD and the USB connection stinks.
Treeman, I've noticed you have spent a lot of time on this problem and seem
to be the most knowledgeable person I've come across as I've been scouring
the internet for the last 3 months or so. I haven't seen much info recently
though that is new.
I refuse to roll everything back to SP1 since I actually like the pop-up
blocker and I'm guessing will run into other compatability problems if I do
-i.e. video, etc...
Can anyone help? Does MS have a solution?
I have what seems to be a very common problem - my Sony DCR TRV22 DV
camcorder is no longer recognized at all via Firewire by Windows since
installing XP SP2.
I have 2 systems with the same issue:
AMD 2600+
Asus MB nVidia nForce 2 chipset
Soundblaster Audigy 2 Platinum with Firewire &
Windows XP upgraded to SP2 from SP1
iDEQ SFF PC w/ built in Firewire
Celeron 2.4 GHz
Windows Media Center Edition 2005 (which comes with SP2)
Here's what I've done:
1)Bought a new firewire cable (before I realized it's definitely an SP2 issue)
2)Various Spyware/Virus scans (which I do anyway - BTW MS AntiSpyware Beta
is awesome for getting rid of that IST bar)
3)Tried my friend's identical DCR TRV22 - same issue
4)Replaced my SP2 IEEE 1394 files with SP1 as per previous posts
5)My Firewall is completely OFF
6)Re-booted with my camera connected and ON
7)My IEEE 1394 Controller is seen by Windows as working properly
I have some footage I must get over onto DVD and the USB connection stinks.
Treeman, I've noticed you have spent a lot of time on this problem and seem
to be the most knowledgeable person I've come across as I've been scouring
the internet for the last 3 months or so. I haven't seen much info recently
though that is new.
I refuse to roll everything back to SP1 since I actually like the pop-up
blocker and I'm guessing will run into other compatability problems if I do
-i.e. video, etc...
Can anyone help? Does MS have a solution?