ETX-MGX with the GEODE GX1 266 CPU not running XPE!!

[Gustaf]

Hi,

I have a ETX-MGX card with the Geode GX1 266MHz CPU and the CS5530
chipset.
The manufacteur have XPE componets for this card of their website.
www.jumptec.de (kontron). XPE runs on the machine but I can not get
the PCI Bridge and Video Adapter installed correctly (Unknown
devices). I have tried to install video drivers from xpefiles.com and
have also tried to add the component "Cyrix Cx5520 Rev 1 PCI to ISA
bridge" in the targetdesigner as suggested in previous threads with no
luck.
The BIOS I am using on this card is a Phoenix v4.0 release 6.0 from
2002. Should it be flashed? I have no idea what to do and I'm getting
desperate when nothing works!

If anyone got the Geode GX1 working with XPE please respond and help
me out.

Kind Regards,
Gustaf Sandmark
dc(at)sandmark.se

 

[Andy Allred [MS]]

Experiment by trying to install full XP onto the machine. Then run TAP
and import that resulting PMQ.

If you've already done this, are there any devices not found when you
import the PMQ into TD? That's going to the device you need to find the
component for.

Also, take a look at the setupapi log in the runtime as well as the FBA
Log (.\windows\FBA\FBALOG.txt)

 

[Guest]

I am running Geode X1 300 MHz and concure with Andy. I tried running TA.exe
from DOS but ended up with Blue Screen.
kevin