Thinkpad21 said:
Trying to Install an Argus USB Digital Still Camera, and getting the message
:
An error occurred during the installation of the device
The class installer has denied the request to install or upgrade this device
I have tried it on 3 different Windows XP Pro SP2 computers with same
result...
Found couple of formus answers, tried deleting the set regkey in
HKLM\System\CS001\Enum\USB and powered down, and tried to reinstall, but
still the same error...
Can someone help !!!
Thanks !!!
Try loading up a couple of the Windows bundled drivers for imaging
devices to initialize the imaging class installer. Then attempt to
install your digital camera. I have found this to work when installing
scanners. I've never received the error when setting up a digital
camera, but they are all imaging devices so hopefully this will work
for you:
1) Open the Windows Control Panel.
2) Open "Scanners and Cameras".
If you are on Windows XP your Control Panel may be in the browsing
view, you will find "Scanners and Cameras" under the section
"Printers and Other Hardware".
3) Double-Click on "Add Device".
4) Click "Next" on the Welcome to Scanners and Camera Setup Wizard.
5) Under "Manufacturer" on the left side, scroll down, find and
select "Xerox".
6) Under "Model" on the right side, scroll down, find and select
"Xerox Network Scanners" then click on "Next".
7) Click on "Next" on the configuration instructions.
8) Click on "Next" to accept the default name of the device.
9) Click on "Finish" to finish loading the driver.
10) From "Scanners and Cameras" double-click on "Add Device" again
11) Leave the default selection then click on "Next".
The default selection is normally Manufacturer = "Afga" and Model =
"Afga ePhoto 1280 Digital Camera".
12) Under "Available Ports" select "Automatic Port Detection"
then click on "Next".
13 Leave the name of the device default and just click on "Next".
14) Now Click on "Finish" to finish loading the driver.
15) Windows will now load the driver files for this imaging device.
16) Double-Click on "Add Device" from within Scanners and Cameras
again.
17) Click on "Next" in the Welcome screen.
18) Windows will now load the driver files for this imaging device.
19) Reboot the computer then begin the camera installation from the CD
that you received with your camera
If this resolved your problem and you've verified that it works. You
can go to "Scanners and Cameras" and right-click and delete the Afga
Camera and the Xerox Network Scanner so you don't have those additional
devices listed.
